Having problems with your 1999 Chevrolet Silverado 1500 ?
Driverside inside latch won't open door. The handle pulls all the way out but won't work. Out side works fine. How does one get in to the works?
Hello\012 my name is Ben and I can help you with this. Your problem is listed as 1999 Silverado, so I hope this will help you. Look\012 toward the front bottom and remove that screw, then there is one at the\012 armrest. If power windows, carefully pry the switch assembly up and \012disconnect electrical connectors. If manual windows, there is a clip \012shaped like a " C " that holds the handle on a grooved shaft shaft. You\012 can either buy a special tool to remove the clip or use a very thin \012screwdriver and pry it off from behind the crank handle. It helps to \012push the door panel in slightly to gain access to the back of the crank \012handle. CAUTION, the C clip has a tendency to fly off into outer space \012never to be seen again. Carefully pry out the trim piece \012around the door handle. Next remove that triangle shaped plastic piece \012at the top of the door trim, it just comes straight out, ( use a small \012screwdriver or putty knife to gently pry it out from the edge ) , once \012you are sure you have found all the screws, start at the bottom of the \012panel and pry it out, when the fasteners are out lift the panel up.If \012you meet STRONG resistance double check for any screws you missed. If \012you have any questions about this feel free to leave a comment and I \012will try to clarify my answer, Ben.
Repair Help & Product Troubleshooting for 1999 Chevrolet Silverado 1500
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.