Having problems with your 1997 Saab 9000 ?

1998 saab 9000 cse error code p0444 - 1997 Saab 9000

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 1997 Saab 9000

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

1st error: p0136 oxygen sensor circuit bank 1 sensor 2 2nd error: is p0325 knock sensor 1 circuit (bank 1) my check engine light came on with and I went to advance auto parts store and they checked the code for me with their code scanner the 2 error codes were read. how much will it cost to get them fixed at the dealer? I don't have the mechanical skills for this problem.


Around 300.00 -400.00 est. at dealer garage maybe little cheaper not much more ... 1997 Nissan Maxima

1998 saab 9000 cse error code p0444 - 1997 Saab 9000


... 1997 Saab 9000

Engine check light on error code 1 is P0171 system too lean bank 1 error code 2 is P0174 system too lean bank 2


P0171 system too lean bank 1\012P0174 system too lean bank 2\012links to information ... 2001 Jaguar S-Type

I HAVE A P0300 OBD CODE I DID A COMPRESSION TEST TO ENGINE AND IT PASS THE TEST,I DID CHECK EGR VALVE,CHANGE SPARK PLUGS,IGNITION WIRES, CAP AND ROTOR, I DID CHECK TPS SENSOR MAF SENSOR,FUEL PRESSURE,AND OXIGEN SENSORSI I FOUND THAT ON BANK 1 BOTH SENSORS (UP STREAM & DOWN STREAM )WORKS NORMALY BUT ON BANK 2 THE SENSOR 1 CHANGE FROM 0 TO 600 MILIVOLTS BUT NO CHANGES FROM RICH TO LEAN &SENSOR 2 HAS 0 MILIVOLTS & NO CHANGES FROM RICH TO LEAN SO I SWICHT SENSOR TO TEST THEM FROM BANK 2 TO BANK 1 AN


... 1997 Nissan Pathfinder

I have a 2003 Nissan Sentra SE-R Spec-V (6=speed) My car goers into safe mode. I first had 2 error codes. 1 was for fauly O2 sensor 2 was for MIL circuit my mechanis changed the o2 sensor for me. (he had to make a new hole and put fitter and reconnected the wires since they were cut - i guess previous owner changed the manifold and cut the wires) We reset the car and it was driving find for 1 day and now goes back into safe mode. We scanned for codes but the only code that shows is P0650 (MIL) C


... 2003 Nissan Se R

I changed the battery in my 2007 Honda Accord LX. Now the radio clock is flashing and when I try and turn on the radio is says ERROR #. Each time I touch any buttons it spells out CODE one letter at a time with each button I touch then ERROR # comes back up. (i.e. ERROR 1; CODE; ERROR 2; CODE, etc.) I quit at ERROR 4? Any ideas how to fix this?


Look in the glove box for the code , some dealers stick it to the box door. When it ask for code punch in those numbers. Some dealers put the code in the front of owners manual too. I think its five numbers ... 2007 Honda Accord Sedan

Car came in no start-doa. replaced distributor pick up assembly. car ran but hesitated between 50-60 mph. replaced wires plugs,cap,rotor button, air filter. car runs, after about 4-5 min. driving car shuts down no throttle. let sit a few seconds, car starts and repeats problem. before tune-up pcm threw a mis-fire cyl#1,cleared code. no mis-fire code no hesitation just shut down problem with no engine lite. datastream shows cyl#1 0 misfire,cyl#2 0, cyl#4,5 &6 show high misfire rate. not famil


Have you replaced the fuel filter? what is the fuel pressure?, this sounds like a loss of fuel pressure issue, that would account for the miss fire codes, to check fuel pressure look at the top of the engine, in the fuel supply pipe that plugs to the ... Chrysler Cirrus

2003 Saturn L300 with error p0050 (O2 sensor) Had sensor replaced, but still get reading. Had similar problem 2 years ago. Was told error was in way non-saturn diagnostics read saturn code. was told code was different. (p0300?) replaced bank 1 sensor 1 and light went away. Nobody seems to remember this, and I can't find paperwork


... Saturn L300

What is Error code P0155 on a 2004 Dodge Stratus - My Experince Error Code P0155 (Bank 2 Sensor 1) - I just replaced the O2 Sensor because of this error code in my 2004 Dodge Stratus R/T with the 3L 6 Cycl engine. It was the upstream one. I found it right in front of the engine behind the upper radiator hose. (There was another one -I assume the downstream one - underneath by the Oil filter. ) I had a little difficulty removing the heat sheild so I coould get to the nut portion of the sensor. I


... 2004 Dodge Stratus

1999 pontiac grand am se 2.4l. error code 171 and 174. banks 1 and 2 running lean. also code 440 vac leak. also trac off light. recently i changed my brakes and now i have this trac off light. checked the sensors behind hubs both clean and intact. also for code 440 have changed fuel cap several times. now the running lean error. can this be solved on my own or will i have to bring it to a pro?


You can raise your hood and look for any signs of an obvious rubber hose that has come off of anything. The Vacuum situation is sometimes hard for someone to diagnose and we use a smoke machine to find leaks a lot of the time as sometimes it is hard ... 1999 Pontiac Grand Am GT

After receiving the error code p0036, (Heated o2 sensor 1 Bank 1) I replaced my o2 sensor, Cleared the computer and drove it for a day in a half.... Then the Check Engine Light came on again. After checking the code for that problem it came up P0046 The OTHER o2 SENSOR, (Heated o2 sensor 1 Bank 2) so I thought that maybe when one goes bad, they both go bad... So after replacing the SECOND O2 Sensor I again cleared the computer. Again after driving it for a day and a half the **** check Eng


... Cars & Trucks

Honda CR-V : Error 1. CMP-Sensor A circuit intermittent interruption; Code 57-02 Error 2: Code 70-02 A/T system malfunction What is the solution to these faults ?


... Honda CR-V

I have the error codes but need help understanding them, and figuring out what I need to replace and where it would be located on a 2005 Chrysler T & C,self test codes are (0016 Bank 1 Sensor A) = Crankshaft/Camshaft mis-align/sync (0138 Bank 1 Sensor 2) = 1/2 O2 sensor short circuit or shorted to voltage. My van is down from 24mpg to 8mpg. I have no accerlation ability as the van surges=jerks,chokes,cuts out both when attempting to accelerate or in park or netrual when pressing on the gas.


Your timing is off and an O2 sensor issue. The timing is your big problem though. Thats whats making your car run bad. Basically you need to realign timing belt. Probably won't need to buy anything unless your timing belt is off. Unless your mechanic ... 2005 Chrysler Town & Country

Error code 1762... In D It feels like it is trying trying to start off in 3rd gear, If i pull it down into 1 it starts off better and I can manually up shift it to 2 and then D.If I shift to 2 When slowing in D it will downshift but will not downshift again when moved to 1 . Any pin points on this problem


Replace your alternator it is bad stupid i know but thats your issue. ... Dodge Ram 1500

Error code po402 egr flow excessive error code po137 02 sensor circuit low volts (bank 1 sensor 2


Replace the parts, but you must clear the codes after replacement. ... 2008 Dodge Ram Pickup 2500

I got a P1491 error code when my van overheated. I replaced the Relay and the fans, i was told are supposed to turn on with the AC. Fans will not turn on with AC. I checked the 40 volt fuse and it is fine. I used 12 volts directly to each fan and they both work. I see the fan relay connecter has 4 wires numbered 1,2,3,4---How does this work? I tried connecting 12 volts through the plug and wires 2 and 4 will run both fans, but 1 and 3 aren't doing anything. Thanks for your help


... 1997 Chrysler Town & Country

I have error codes P0051 Bank 2 Sensor 1 , P0037 Bank 1 Sensor 2 and P0306 Cylinder 6 Misfire. Where are these two O2 sensors located?


Umm, "First thing to do though is to swap the wires on your coil packs" is a risky idea. This would most-likely cause a backfire and possibly cause severe damage. Swapping coils between cylinders and keeping wires matched to corresponding cylinders ... 2003 Mazda MPV

Hi, I've sent my toyota prado 1998 (RZJ 95, engine 3RZ, petrol) to diagnostic and it shows 3 error codes: 1. code 31: intake air pressure sensor vacuum sensor signal abnormal 2. code 14: IGT or IGF circuit of ignition system fault 3. code 24: intake air temperature sensor signal abnormal (open or short for more than 0.5 second) The only problem that I have with is car is that the RPM are not stable, when I start the engine, the RPM stays at 800 RPM than downs to 600 and go up to 900R


To have so many different codes at the same time indicates that the first place to start looking is the wiring harness itself. Locate the MAP (manifold air pressure sensor - code 31) and IAT (inlet air temperature sensor - code 24) connections. D ... 1996 Toyota Land Cruiser

Po420 bank 1 and po430 bank 2 error codes


Sounds like O2 sensors to me. I havent changed one on a mustang yet but I havent had any trouble with any others that I have done, they screw in like a spark plug but you will need a special tool, I hope this helps you. ... 2007 Ford Mustang GT California Special Convertible

Engine will not start on a 2006 Chrysler Town and Country Limited 3.8, after I cleaned up the Cylinder Heads and replaced all the Fuel Injectors and put everything back together. Now it is throwing off 3 error codes. 1) P0032: Ho2S Heater Control Circuit High, Bank 1, Sensor 1. 2) P0129: Barometric Pressure Too Low. 3) P0700: Transmission control System (MIL Request). Prior to taking the top half of the engine down I had a tapping sound which I thought was do to a bad lifter. After checkin


I guess I will start with the basic statement - as with any no start issue, you have to figure out if it is a spark or fuel problem to proceed.As soon as you crank the engine, the computer runs tests and looks for signals from sensors. So it ... Chrysler Town & Country

I have 2004 model golf 5 2.0 ltr fsi i'm having two problem first is open circuit for brake vacuum pump code error is p1429 and second is P0030 HO2S Heater Control Circuit, Bank 1 Sensor 1 and P0050 HO2S Heater Control Circuit, Bank 2 Sensor 1 pl help how to solve this


... Volkswagen Golf

My chk engine light came on and i went to autozone and they put it on there diagnostic machine and it came up to the code p0708 definition: my transmission range switch open circuit condition probable cause 1. open circuit condition 2. failed TR switch, another code was p1506 definition: Idle Air control system overspeed error probable cause 1.check engine for vacuum leaks 2.Damaged or misadjusted throttle body 3. Failed IAC valve, another code was p1744 definition: Torque converter clutch(TCC)s


Your vehicle is driving good, not slipping etc... because what i can see from what im reading you have an electrical problem with the transmission wiring.. check the plugs that plug in the transmission, and follow them, im sure you will find somethi ... Mazda 626

How to enter code? went online and paid nine bucks, didn't really help me because of the following problem. 5 digit code, car radio has preset # 1,2,3,4,5,6.. one of my code is 0 and 9 how the hell am i suppose to enter it?


Come on here for free ,anyway you press preset 1 and use either the volume or tuning buttons ,maybe even the tape buttons to place the number then when all numbers press 6 to enter the code on the venerable old classic vehicle ... 1984 BMW 3 Series

Getting a lean burn error code on banks 1 & 2. reset it and drove 250 miles before it came back on. Reset it again but the code came back within 10 miles. Checked for vacuum leaks, none found, replaced the MAF sensor but code came back within 10 miles.


Check for vacuum leaks.Air tube between air filter and intake manifold.If the motor has over 80,000 miles then the intake manifold gasket can **** in air and leaning out the air/fuel mixture.Give each air / vacuum ... 2001 Cadillac DeVille

Secondary Air Injection Malfunction error P0410 error. Check engine light is on. The OBD read 2 errors. System Too Lean Bank 1 (p0171) & Secondary air injection malfunction p0410. codes. It comes and goes. Can this be a bad EGR Valve?


... 2001 Pontiac Montana
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.4709 seconds