Having problems with your 1997 Mercury Villager ?

How do i change coolant hoses for 97 nissan engine

\015 Power flushed radiator now my coolant leaks i was told the intake had to come for hard too reach hoses\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

I have provide the answer to this already in duplicate post.
Repair Help & Product Troubleshooting for 1997 Mercury Villager

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i change coolant hoses for 97 nissan engine

I have provide the answer to this already in duplicate post. ... 1997 Mercury Villager

I have a 1999 jag s-type and its blowing cold air!!! last weekend while i was changing both idle belt pullies i relised that coolant was leaking from the hoses(the ones on top of engine) that connect to the heater control valve,now the hoses are change there's no heating only cold air but before the change everything was fine!!! also in the morning when i turn the engine there's a noise thats last for a couple of seconds it similiar to the sound when the engines been turned over twice.... thanks

You might have to bleed the air out of the cooling system,also,check the fluid level for the coolant,make sure the heater control valve is working,it could be defective,and on the noise,check to see if the belt is wet,if it is,it will disapate.If the ... 2000 Jaguar S-Type

Got a pre-owned nissan sentra 2001 gxe. Everything works but Heat. Engine was getting overheated ,2 miles driving can make the temp to H. checked upper hose was hot and lower was cold. took it to the mechanic thermostat changed. Heater and radiator worked for 10 min GOOD and still the same no heat and engine over heating. Took the car to mech now he changed water pump. car ran for 20 min GOOD and again no heat ,upper hose hot and lower hose cold, funny thing is that ,that the temp is fluctuati

Try this procedure:\012\012\011The thermostat can be stuck close. If you feel the upper hose very hot and the lower hose cooler than normal, it may be a stuck thermostat.\012\012\012 ... 2001 Nissan Sentra

58.5K miles - 2004 - car overheated on expy. Coolant Temp gauge went off the scale and motor died. Dealer analysis: valve broke & damaged sparkplug cyl & piston. overheated coolant damaged radiator & hoses. resulting rubber/plastic particles got in engine thru coolant system and ruined rest of engine. replacement of engine required. dealer likely will suggest coolant had to be changed at 30K miles - I think the thermostat failed or a valve stem broke - either causing motor to fail and ove

Hi,\015\012\015\012Whatever the reason for the engine siezing, it will be to your advantage to replace the radiator as debris may already be blocking a number of the lines.\015\012\015\012As to the overheating, the most likely ... Hyundai Elantra

Changed radiator hoses and cap. changed coolant. still not getting flow with overflow into bottle. Thinking it may be bad thermostat. had coolant come out under cap. checked bottle and cap and no leak again but temp a little hot. cap is cool at normal temp for jeep cherokee 1992 4.0l no leaks under engine or anywhere else except before I replaced hoses and clamps.

I had a leak on my top on hose on my jeep it was such a small hole I couldnt even recognize it. Almost mistaked it for the metal pipe corroding through. Now anytime your messing with the hoses it is best to just change the thermostat. They are cheap ... 1992 Jeep Cherokee Sport

Frontier 2000 2.4L King Cab 100K miles. Temp guage indicates overheating. Will intermittently spike then drop to normal. Engine does not "smell" hot or run rough at any time. Grab upper hose, you can keep your hand there, hot but not excessive hot. Lower hose is cool. Replaced temp sensors - no change. Replaced thermostat, no change. No leaks. Coolant is full. Borrowed OBD, and got temp reading while driving several miles uphill- engine running hot but within spec.

I've had problems with Datsun (later Nissan) engines hanging the closed thermostat until it boiled, then the thermostat released and operated normally. If you increase the small vent hole in the thermostat valve plate a small amount, the problem disa ... 2000 Nissan Frontier

Fuel leaking out of fuel rail...I was changing a coolant hose behind my engine and accidentally tapped fuel rail. Fuel started leaking out, stopped, and then started again when I started the engine. I immediately killed the engine to avoid a fire. My question is this: I am not sure if I have o change the whole assembly or if I can just remove and change the part that is leaking.... it is at the very end of the fuel rail- looks like a quarter-sized to 50cent sized bolt that has threads and lo

... 2005 Suzuki Forenza

Coolant changing Hi there, I want to completely change the coolant in my Nissan Pulsar 1.8L (1989). But don't know which hose to take out to drain all the old coolant from the radiator? Any other tips will be welcomed. Thanks a lot.

On the bottom of the radiator there should be a tap to open and release the water if not then just remove the bottom hose attached to the radiator ... 1989 Nissan Pulsar

Hi I have a 2002 honda civic lx 1.7 manual trans. Why does my coolant rise Up and is pushed up my reservoir when i accelarate past 4k rpm. I changed radiator ,water pump, timing belt hoses, no oil in the coolant or coolant in the oil. and when engine is cold I feel like is spuddering once its warm it runs ok. Chck engine light code reads p0600?? Please help.

... Honda Cars & Trucks

I have a Nissan Blue Bird ARX model and have changed the engine and the radiator. My issue is with the mileage. The previous mileage used to be 180,000 and the second hand engine which I've got fixed is 55,000. I would like to know how will I change the mileage as it is still showing 180K and how much would it cost. I would also like to know where can I buy the owner's manual because this is a second hand car which I bought and it did't have owner's manual. Is there any specific coolant and engi

Leave the milage alone when you sell the car show proof with date that you did the work you'll advertise and good luck paper reciepts work well. ... 1993 Nissan Altima

I purchased 1500cc NISSAN Sunny 1996 model Car. Up to 80 km speed , she behaves very well. Above 80 frequently she hangs up with sudden reduction in speed. Why this misbehaviour?. When am I supposed to change the engine oil, after how many KM ride and what will be colour of the engine oil demanding for change ? Also let me know the specification of oil & coolant used in this car..Will you be in a position to send me a service manual (in English) on payment, if yes what is the cost of it?

20/50 ,cheapest oil and change every 6000mile with oil filter every third oil change ,as for hold back ?=?could be anything under the bonnet causing this ... 1996 Nissan 200SX

Hello, I have a 2000 voyager 3.0 my heater hose broke and i replaced both inlet and out hoses at the same time. i filled back with coolant, the car still overheating, i changed the thermostat and no more overheating but my chck engine light came on, please do u have ideal what happen. Scanner said something to do with thermostat, I know that i unpluged the coolant sensor that seat right by the thermostat housing and i pluged back after repalcing the thermostat

All trouble codes must be cleared from computer, your parts store can do this for your, free. your coolant sensor should have been replaced as well. car is 13 years old. c'mon dude. oil change , good idea. what shape are rad hoses in , they pro ... 2000 Plymouth Voyager

My 2005 land rover freeland over heats in egine the temp sensor read good in side but the the engine water bubles in the coolant botle and the thermostate hoses stay cool we change the thermostate but still the same water bubules in coolant bottle we check the temp on the engine with a heat gun it reads 150 but in ssid it reads good it feels like its over heating

Water bubbles in tank is normal. Rovers have a closed system, that onset an overflow bottle, it's a remote filler and you normally will see coolant circulating in tank. I'd be worried if I didn't see circulation. ... 2002 Land Rover Freelander

Overheating I have replaced engine coolant sensor and relay and the engine electric fan does not come on. I connected the fan direct and it turns on. What else can I check? I have a '93 formula firebird (LT1) Both my fans check out. Electrically everything seems sound. I just changed the thermostat and still does not work. The engine block however is hot and the return hose to the radiator is cold, so my thinking is the cooling pump has failed. My only worry/question is what turns on the primary

Thermostat is not opening, or is installed backwards is why the hose stays cold. Make sure the nugget is facing the engine block. If this is correct, make sure the belt is installed correctly and is rotating the water pump in the right direction. ... 1999 Pontiac Firebird

1992 Nissan NX Coupe. Mechanic has examined engine with remote camera and states - bore worn and ball bearings in sump. Change engine. original fault - rad top hose connection failed and whilst filling with water with engine running water coming from filler indicated head gasket gone. Your opinion please. Jim

Hi!!\015\012\015\012Your engine is gone. Not worth fixing. If you like the car, get a used motor at a Junk Yard. It still will run about $500 installed. ... Nissan NX

I just change the coolant hose on my 2002 mercury cougar, 2.5 engine , but it boils over , is there a bleeder valve on this vehicle and where is it?

Try this. With the engine cool. Remove the radiator cap. *(wear gloves, eye protection, and keep away from where coolant can shoot out just in case. Start your car. allow the engine to come to temp with the radiator cap off. looking int ... 2002 Mercury Cougar

I'm talking about the metal cooling hose that goes from the back part of the water pump to the thermostat in the back part of the engine closest to the fire wall it is behind the engine. metal pipe is leaking coolant and want to change it out. is it difficult to do. do i need to remove a lot of things.

Its not that difficult BUT ,providing that you have a good tool kit with a nice 3/8th socket set with extra extension bars then not a problem.These metal tubes are a pain for corroding ,mainly caused by not using 50% antifreeze all year round ... 1992 Honda Accord

I have a lexus es 300 1995 i just changed the head gaskets placed engine back together all fluids and started vehicle now car overheats I burped the radiator added more coolant now coolant bubbles out radiator at high temp. and sprays out side of inner water transfer hose. What could be the problem?

... 1993 Lexus Es 300

2006 Nissan Pathfinder v6. Auto trans. *overheating. No coolant leaks, the guage goes up when idling. Had a guy change my upper and lower hoses due to a previous leak. He also plugged the heater hoses. Could this be my issue?

... 2006 Nissan Pathfinder

My pulsar in overheating put new coolant in no change fans dont seem to be working but engine was hot and gauge showing only halfway, cant find the thermostate is it in the housing the top hose is connected to? dont know why the water didnt seem to circulate and cool the engine any ideas

Make sure the fans are coming on or it will over heat. If the fans come and the gauge is reading hot check the thermostat. Follow the top radiator hose to the engine block it probably has 2 bolts holding the thermostat housing on. ... 1990 Nissan Pulsar

Ok. guys. i am losing coolant. it is not showing up in the oil and i have no external leaks. i did replace the head gasket and all associated gaskets about two months ago. also have changed the upper and lower radiator hoses, the thermostat, the water pump, the engine coolant temprature sending unit, the serpintine belt, the tensioner pulley , and also the instrument cluster. my question is: is this leak most likley caused by the intake maniflod gasket leaking? i do have bubbles coming up in my

If the coolant is leaking at the head gasket or the intake manifold gasket slowly, then new gaskets will have to be installed. The bubbles coming up is a bad sign that the seal of the coolant system is bad or it's overheating the coolant to the point ... 1997 Buick Century

I have a p0217 code (engine overtemp condition) I have replaced thermostats, water pump, flushed out radiator, check cap with coolant pressure tester, changed spark plugs, smelt spark plugs to see if it smelled like coolant for head gasket check. Dont know what else to do. I had the Body Control Module replace in January. All this is for a 2003 Nissan Altima with 160,000 plus miles. Can you help?

... 2003 Nissan Altima

I have a 1990 Nissan Sentra that isn't blowing heat out properly so I was going to change the Thermostat out. I can't find the stupid thing. The top radiator hose on the passenger side goes straight to the motor and really should be right there. No thermostat. The bottom radiator hose on the drivers side goes up and around the back side of the engine. I can't see where this thing goes. Please help. Thanks

Hi,\015\012 \015\012Thank you for contacting Fixya.com.\015\012Generally in this type of case the cooling system is either air bound, meaning ... Nissan Sentra

I have a 2002 Honda Civic LX. My car is overheating. The radiator looks in great condition, the fans do turn on when connected directly to the battery. The engine coolant temperature sensor, and the sensor where the thermostat is housed has been changed. The thermostat has also been replaced the hoses are good. The radiator fan relay fuse has been changed. The radiator cap is good too. However, I am missing the water reservoir cap. Can the missing reservoir cap cause my car to overheat? Can anyo

Change your thermostat switch, and have your Cylinder Head Gasket Replaced, also check for your water jacket located near your distributor... it might need to be replaced too.. ... 1998 Honda Civic

I have a nissan pulsar 1996,GA15 engine. The vehicle was stalling and running very rich. It also is jerking and has no power on acceleration. It is using about 40l of fuel every 170kms. The coolant temp sensor was replaced-no change. The injectors were renewed-no change. The air flow meter was repaired-the vehicle does not stall anymore, but it still eats alot of fuel and jerks with no power at acceleration. Any ideas where to go next?

Check o2 sensor ... Nissan Pulsar
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.8139 seconds