Having problems with your 1997 Jaguar XK8 ?

Need source for new 1997 XK8 convertible front coil springs

\015 Car has 153,000 miles and is now "bottoming out" after replacing front struts. Now believe I need to replace front coil springs, but have been told that Jaguar no longer sells them for the 1997 XK8 convertible\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

\015\012Yes front coil springs are what you need !
\015\012I think the spares situation for Jaguars, is disgusting with the main dealers.
\015\012I have been trying to source them myself, for about 2 weeks, and only found ****, painted up second hand ones.
\015\012I will keep trying, and let you know if I am lucky and find a source for genuine new springs.
\015\012Best Wishes
Repair Help & Product Troubleshooting for 1997 Jaguar XK8

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need source for new 1997 XK8 convertible front coil springs

Hi \015\012\015\012Yes front coil springs are what you need !\015\012\015\012I think the spares situation for Jaguars, is disgusting with the main dealers.\015\012\015\012I have been trying to source them myself, f ... 1997 Jaguar XK8

I just bought a used 2007, Nissan 350Z Roadster. The front of the car seems to be very low and every time I drive over a high speed bump, the bottom of the car hits the bump hard. This is very annoying. I almost have to stop and drive over the bump very slow in an angle almost. Do I need new shock absorbers and new spring coils in the front??

Taller tires will help. ... 2003 Nissan Altima

My front right coil spring snapped in half and i need it fixed pronto im gonna pull the new one off a parts ranger it looks like i can just compress the spring and pull it off but can I?

Here is a link to information that should help yo: http://www.autozone.com/autozone/repairinfo/repairguid ... 1994 Ford Ranger Supercab

2003 ford escape i bought for 900 and was told from him that his mechanic said that it just needs 2 fornt tires and catalic converter and that was all that was wrong with it, then i bring to my mechanic and he says piston 2 has low compression and the transmission is meesed up plus it needs 2 tires and converter should i scrap it or could the 2nd piston just need new rings or could it just need to be cleaned, mechanic put new coils on and got it running half descent but he said it prolly wouldnt

You should have checked it before you paid any money out.It will cost your much more money to fix than the car will be worth so you should cut your losses and scrap the car.Next time be smart and have a qualified mechanic check over t ... Cars & Trucks


... Lincoln Town Car

I have a 2002 volkswagen jetta.do I need a coil spring depresser tool to remove the entire coil and spring assembly on the front? I have one friend saying I need the tool and another saying I don,t.

Its alot safer. ive seen a spring stuck in a concrete wall cuz someone wasnt using a spring compressor ... Volkswagen Jetta

I need a diagram of the front coil spring assembly(idependent suspension) for a 1995 lincoln town car. Broken right front coil spring.

\015\012\015\012Your suspension system is on the right side of this diagram. ... Lincoln Town Car

I have a 1985 chey truck that leans on driver side about 1 1/2 inches diff. than the pass. side. i have put new springs front and back and new shocks also front and back. i still have the problem . need answer please

The frame is most likely bent. to your knowledge, has it ever ben in an accident? ... 1985 Chevrolet K1500

2007 Saturn Ion Front end grinding noise while rolling up to a stop. New brake pads & rotors. New front struts, CV shaft and rear coil springs all replaced in the last month. I Have had in into two different shops including the dealership and they can't replicate the noise nor find any problems when inspecting brakes. Any ideas???

Wheel bearing ? ... Cars & Trucks

Front right coil spring has slipped below spring perch, need to correct. I need to take apart, looking for a detailed diagram, and reassemble. Can this information be obtained?

This usually happens when the spring has broken. You'll have to remove the upper 3 nuts that hold the strut mount to the body, and the bolt that goes through the lower control arm that mounts the strut, also the sway bar end link, then remove the sp ... 2004 Ford Explorer

Converting obd1 vr6 from coil packs to distributer: The old vr6 motor blew, cracked block, and messed up pistons. Got a new motor for cheap but it has a distributer instead of coil packs, i need to know if the is a way to wire it up and make it work? I didnt get the wiring harness or ecu for the new motor either.

You need the motor with same hook up.or you going to have computar problems and timing problems. ... 1995 Volkswagen Jetta

Have a 92' GMC, XC, K1500, 4X4, 5.7 350 engine with transmission fluid leaking from the torque converter cover. (Has a 4L60/700R4) I thought it might only be needing a new conv or possibly a new front pump seal. Then I drained the pan and the oil smelled burnt. No shavings but was told the clutch plates could be burned up and I will need a rebuild. What could have caused this...aside from being old or overworked?

Unfortunately, you hit the nail on the head, i assume being a 1992 model, that the transmission has not been overhauled or rebuilt in it's almost 20 years of service. If it hasn't you have done very well.\015\012It is normal wear and tear in yo ... 1992 GMC Sierra K1500

I need a lift spring for a 82 rockwood pop up camper the front left side spring seems to be stretched and kink and it catches when you try to raise the camper up I have the camper propped up with 2x4s and diconnected the arms from the roof so that i can work on the spring without any weight on the arms any help on where to find a new or used spring???

... Cars & Trucks

1976 mgb w/cat converter please help- day 2 after changing to a new coil adn starter and i cannot get it to start -the last time ti tried- the starter got hot but still no start when i turned the key. i need to verify the coil and starter wiring i assume these are right- coil- green white to positive and blue resistor to positive and ground coil- white/ black to negative and brown wire to I think a ballast for the distributor wiring system starter -big battery positive to lower not and rest

I have the same model year as yours, but that does not really matter. If you go to the back of your Haynes manual, the wiring color codes are spelled out for you specific to your car, It is possible that a new or rebuilt starter can be stuck (clearan ... Morgan Aero 8

Catalytic converter My check engine light is on, and the codes have been run a couple of times, and I need a new catalytic converter. My question is, where is the catalytic converter for a 2000 Accent? Is it half-way down the car before you get to the muffler (picture A) or does it sit vertically up in the front of the car with four inputs to it (picture B)? I'm thinking about buying one and doing it myself, but I don't want to replace the wrong thing.

As we can see in figure below it sit vertically up in the front of the car.\015\012 ... 2000 Hyundai Accent

My 1994 range rover county lwb has a problem with the air suspension. It's down to the bump stops. The shop replaced a relay (amr1111) and the suspension control module. When that didn't fix, they told me I needed a new compressor, and my front airbags leaked and needed replacement. They wanted $1600-1800 to convert to standard suspension (not including the repairs they already did that weren't enough.$775) Is that reasonable, or should I replace compressor and airbags?

I would replace the compressor and the air bags,cause the ride is automatic,and the truck is a 1994 model,and you will most likely not have the problem again for a long time.First look at,...are you wanting to keep the vehicle for a long time?Then ,i ... 1994 Land Rover Range Rover County

I have a 2000 Mazda Protege EX, 1.6 L, manual transmission. Car was driving normal but hesitating and Engine light came in. Checked MAF hose & is not cracked, changed spark plugs & coil, but light remained on, so mechanic told me to install a new O2 sensor (which I did) light went off, but car still hesitates and drives slow, cannot go above 40mph, (feels like clogged) Mechanic tells me I need to "clean" my front Catalytic but, then what was the purpose of installing a new O2 sensor if light wi

... Jaguar XJ8

I can't find the correct power steering hose name or part number. This hose or coil for lack of a better word, looks like a heating element for a hot water heater. This is for a 1998 Sebring 2dr convertible 2.5L V6. The part I am needing is in the front of the car directly under the radiator. I'm told it is a cooling hose for the power steering fluid yet this metal coil type hose gets hot. Nontheless it is damaged and leaking the power steering fluid. Please help with what this part is called an

The part you are asking about is the power steering pressure hose . You can get one at your loacal auto zone. here is the link below.\015\012\015\012 ... 1998 Chrysler Sebring

96 s10 2.2 4cyl. running lean . It has new fuel pump and fuel filter. I've checked the converter, new 195 degree thermostat,changed fuel regulator,changed front 02 sensor, changed coils and Diagnostic tool says it's not ignition problem,changed map sensor,checked voltage to fuel pump. Truck runs fine for five to ten min. then starts loosing power and gets worse the more you drive. You end up with a bog at W.O.T. Funny thing is you can mash in the clutch and turn the ignition off while still roll

I know you said new fuel pump and filter but I would recheck the fuel pressure. Drive the vehicle with the fuel pressure gauge on it and see if the pressure drops after 10 minutes. ... 1983 Chevrolet S-10

My v6 1995 mustang convertible will not start. Good battery, starter doesnt engage, found a loose wire under the right front of engine, should connect to a mounting point near the right front coil spring. what is this wire and the piece it connects to, a ground?

If the wire is black in color then its a ground if its red in color then its a hot wire and it needs to go to the starter the blak wire can attatch to any part of the car that will give it a good ground. ... 1995 Ford Mustang

Need a diagram of undercarriage 2002 cl500 showing the front converters and hydraulic sensor switch/hearnes. the wire was cut and need to buy a new one .

... Mercedes-Benz CL500

Chrysler says I need a new engine for my 2006 Sebring convertible with 53,000 miles on it. I had to bring it to them 3 weeks ago. They said a valve spring broke and took out cylinder # 4. They had to replace it. I drove it 500 miles the engine light came on and I coasted int6o a gas station and had it towed back to Chrysler. Now they say I need an engine

MAKE THEM PAY FOR IT ! ! ! ! ! ! ! ... Chrysler Sebring

My town car is begining to lower on the passenger side in the front but there's coil springs up front. And when I hit bumps it squeaks and it turns to the right like I need an alignment

... 2005 Lincoln Town Car

Fit new front coil spring on peugot 307

... Cars & Trucks

This guy told me i needed a front driver side wheel bearing. and yesterday my 93 nissan maxima started making a thumping noise everytime the wheel goes aroung 360 degrees.the mechanic said something about SPRINGS being pressed already on the new wheel bearing. does it come like that or do he even know what he's talking about

Sounds like cv joints dry or warn ... 1993 Nissan Maxima
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.5610 seconds