Having problems with your 1997 Isuzu Trooper ?

Cannot remove inner cv axle on front assembly for my '97 Isuzu Trooper. We have taken everything else out but the inner axle will not come out of the transmission.we have banged and wedged and pulled and it just won't come out. what are we doing wrong??

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Sometimes its tough. You need to get a pry bar behind the axle where it goes into the transmition. Don't be afraid to pry on it.
Repair Help & Product Troubleshooting for 1997 Isuzu Trooper

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cannot remove inner cv axle on front assembly for my '97 Isuzu Trooper. We have taken everything else out but the inner axle will not come out of the transmission.we have banged and wedged and pulled and it just won't come out. what are we doing wrong??


Sometimes its tough. You need to get a pry bar behind the axle where it goes into the transmition. Don't be afraid to pry on it. ... 1997 Isuzu Trooper

I have a clicking noise coming from my rear passenger side tire or axle houising. I looked at the rear axle and it seems like the axle housing is coming out from the rear differential. I can see a little wear where the housing maybe was rubbing something. I am not a car expert by any means but i can tell something is wrong. The amount of the clicking noise increases in speed when i drive faster. Please help. What is wrong and is it safe to drive on?


YOUR BEARING IS GOING OUT ... Cars & Trucks

I am replacing passenger side cv axle and can not get the inner portion seperated from the trans axle. Am I doing something wrong I was wondering if both half axles need to be dropped to remove passenger side half axle from transaxle by tranny.


No just pry it out with a pickle pork ... 1990 Toyota Corolla

I have a 1994 toyota camry v6 and im tryinh to remove the inner drive axle out so i can get to the seal where the transmission fliuld is coming out and i have already removed the outer drive axle with the 2 cv boots on them


Is this the passenger side? Remove the three bolts that hold the bracket that the shaft goes thru to the block. Pry the bracket from the block slightly and tap the shaft and bracket from the trans. ... 1994 Toyota Camry

2010 Cadillac SRX Computer system seems to be all screwed up and Service Rear Axle light keeps coming on. The rear axle has been checked and they can't find anything wrong except they think it needs a new filter which has been ordered


... 2009 Cadillac SRX

Radio clock disappear once in a while but if you bang it it will come on.what's wrong with it? is it loose conection behind Radio or is it the cdplayer with itself or need to be replace?


Its a cold solder joint on the readout panel or the mainboard feeding the readout ... 2005 Mazda Tribute

I have had a small tapping noise in the engine for a while. yesterday a loud bang now its a very loud putting/banging noise. still runs but something very wrong. you can smell the odor of gasoline coming from the engine. somebody told me might be the timing belt? its a 2001 ford expedition with a 4.6L engine. help?


It sounds like you had either mild lifter lash or a plug wasn't gapped properly at first which has now gotten even worse. The gas smell that you have may be caused by a plug not firing due to misgap or a lifter that isn't functioning due to breakage ... 2001 Ford Expedition

Why won't my 2003 elantra wont start? It acts like it wants to but dosent, no clinks, bangs, ticks, or anything and none of the warning or check engine lights come on. Had it checked out but thery can't find anything wrong and the computer gives no code.


It the transmission or engine not working. the start up where the key is suppose to turn is not working ... Hyundai Motor 2003 Elantra

Banging coming from the front axles on ruff road & low speed 60000 mi on the car no accident


I have the same problem with 45000 miles, no accidents. ... 2006 Subaru B9 Tribeca

Clicking noise when turning right-already replaced pass side axle. Grease was coming out of inner cv joint-loose boot clip on a 1991 crx with a b16a swap with ys1 cable tranny


... 1991 Honda CRX

I need to replace an output shaft seal on the passenger side of my hyundai santa fe. What needs to come off? Its a 2004 v6 2.7 liter its the front seal where the axle goes into the transmission. I have taken off the bracket holding the inner and outer shafts loose but still don't have enough room to pull the shaft out of the transmission. Do i need to remove the alternator too?


1. remove the aluminum wheel cover using a flat blade screwdriver.\015\012\015\0122. raise the vehicle and remove the wheel.\015\012\015\0123. remove the cotter key, and remove the axle shaft nut.\015\012 ... 2004 Hyundai Santa Fe

When I am in a stoped position and begin to drive or turn the wheels, a loud sort of slipping or cracking sound followed by a weird humming sound seems to be coming from somewhere in the rear axle. This problem is most apparent after long car rides when the car is warmed up. I asked a mechanic and he has no idea what is wrong with it or how much it will cost to fix. Can you help me?


Sounds like your limited slip differential is having trouble. Change the fluid and add the special slip additive. I also had this problem on my 89 wrangler when I bought new tires and one was undersized causing the differential slip to work constan ... 1988 Jeep Wrangler

2000 hyundai elantra axle removal, inner assembly will not come out of transmission


Buy manual, might have retaining ring or fastener ... 2000 Hyundai Elantra

Good Day! I have a 96 Q45 that has a strange problem. Power to the dashboard is intermittant as well as the power steering. If you bang on the fuse cover it will usually come right back on. I looked for a short but can't find anything. And now the speedometer and power steering is going in and out without the rest of the dash system going out! Any idea what is wrong with it? Thanks! Jeff


Since banging in the fuse cover fixes it means that you have a bad contact (not a short, just a loose wire or fuse) in it. Take it apart (make a detailed drawing with where each wire is going where) and crimp a little bit more all the connectors befo ... Infiniti Q45

Changed front left hub assembly on a Mercury Mountaineer 97 and now there is a loud noise when we drive forward but no noise when you back up. The noise was not there till the hub assem was changed also there is no noise when you turn the wheel to the right I think... One way or the other, there is no noise. When you drive faster the noise goes faster like something is not on right and hitting as you go.There seems to be nothing wrong with the axle. Brake light comes on.It is a loud noise like i


When i hit a curb with my 97 cavileier and bent the center hub its made a noise something like the one you are describing i changed it to a new one and there was still a slight noise i took it back of and took a closer look and the new hub had a slig ... 2003 Ford Focus

92 geo prism just installed both cv axles'but getting a grinding noise from left inner side.sounds like a bearing breaking up.but it comes and goes.how hard to fix myself? could this be the bearing the cv shaft goes into?


It could be the wheel bearing have you checked thefront brake pads and have you checked that the backing plate you havent bent and it is toutching the disc this some times accures good luck Lindz ... 1992 Geo Prizm

Need advice on changing the front rotors on my 2000 4x4 chevy 3500 I have taken the brake caliper off and the axle nut, hit the rotor with a 5 lb hammer, but it's not coming off. what am i doing wrong?


Http://www.monkeysee.com/play/11914-how-to-replace-brakes-brake-pads-and-rotors\015\012\015\012this should help ... 2000 Chevrolet 3500

My 2004 Hummer H2 Heat comes on when I dial the temp to 90, and AC comes on COLD at any temp lower then 90. There is no middle at any other preset temp I select, any ideas as to what may be wrong?? Also from time to time the warning light comes on saying Service 4WD but when I took it to a mechanic they said nothing was wrong and that light would not come on nor did the computer say anything was wrong? Any ideas?


If you have automatic hvac system (heat ventilation air conditioning), it is possible that one of the heat door actuators is malfunctioning or "sticking" causing cold air on at any temp lower then 90. Also on the automatic hvac systems there is a hva ... 2004 Hummer H2

I have a 2008 ford explorer and the dome light comes on for no reason. We can be driving down the road and it will come on. It some times comes on when we hit a bump, but we don't have to hit a bump for it to come on. We have taken it in to have it serviced, but they can find nothing wrong. It sounds like a short in the wiring. So why can't the service depatment find what is wrong. This is very dangerous when this happens at night.


... 2008 Chevrolet Express

Were axle comes out of spendal is there a clip that goes on axle to keep axle from moving back inforth there was not one there when i removed it but a bunch of ground metal i tried to put one back on but then front clip that holds hub in would not fit axle would not come out far enough to put front clip on with back clip on


... 1988 Ford F 150

Hi, Have an ATF leak coming out of the right axle where the half shaft enters a short intermediate adapter that connects the axle to the transmission. The transmission seal is dry. The leak is coming from this adapter piece which sort of reminds me of a harmonic balancer type thing. I cannot recall seeing anything like this on any other car before. Oil has to pass through it in order to leak. What is going on? Do I need to replace the (for lack of better words) Axle Adapter?


This is a dampner to help correct torque steer, its self contained, it can be replace it seprate ... 2000 Volvo S80

I have a 2006 Hummer H3 and it has run 100500kms. Recently, I happened to notice the ENGINE CHECK light was on. Sometimes it comes off. But sooner or later it will come back on. Yesterday (Jan.13, 2011). As I started the engine (I had not driven it for three days), I heard a strange sound like something was banging on something. I tried to listen to the strange sound when I stopped the vehicle after driving it for 30kms, but I could barely hear the banging sound. I went to a local Mr. Lube where


Hi and welcome to FixYa!If it's a code po300 then it's definitely a misfiring issue. As a first course of action please replace the spark plugs to iridium if it's still not. If it's already an iridium plugs then it surely is wornout and i ... Hummer H3

1992 Mazda MX3 driver side cv axle won't come out. Took off nut axle stuck and won't come out. How can I get it out?


Get a good pry bar and wedge the bar between the CV shaft and where it goes into the tranny.You should be able to pop it out.If not rotate the shaft and repeat untill it lets go.It is only held in place by a round clip on the shaft inside the tranny. ... 1992 Mazda MX-3

Wrench light keeps coming on, dealer charged 200.00 to see what is wrong and found nothing. The light keeps coming on. Can anyone help with what may be wrong?


Those lights come on when something is wrong that a sensor is reading...take it to autozone have a free scan done...they will be able to tell you what OBD code is coming up. ... 2007 Ford Escape Hybrid FWD

Warning light isn't coming on for a few seconds when the car is turned on, is this a problem? Also the warning light comes on periodically, even when the car appears to be running normally, what's wrong? I've taken it to the shop several times and they also seem to fix whatever is wrong with the car, but the same problems keep arising.


I'd go to Autozone and have them read the engine codes. They'll do this for free at most autozone parts places. The codes will indicate what's wrong and you can then decide if you really need to fix it ... 2003 Mitsubishi Galant
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.8949 seconds