Having problems with your 1997 Ford F150 Regular Cab ?

How do i loosen the tensioner on a 1997 f-150 4.2 v6. What tools are required.

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

I think it is a 15 mm bolt on the tensioner. Pull up on the tensioner to remove belt.
Repair Help & Product Troubleshooting for 1997 Ford F150 Regular Cab

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do i loosen the tensioner on a 1997 f-150 4.2 v6. What tools are required.


I think it is a 15 mm bolt on the tensioner. Pull up on the tensioner to remove belt. ... 1997 Ford F150 Regular Cab

I installed a new belt on my 2002 cavalier,the original shredded,and it won't turnover.I didn't loosen the tension lever to install the belt because I couldn't figure out which tool or how to even fit the tool to loosen it,too much obstruction it seems.The belt is installed per diagram and some of the pulleys twitch when I try to start the car.Is loosening the tension lever critical or could there be a larger problem? Unfortunately I had to drive 2 miles to park when the belt shredded,could that


Check your battery first, make sure its good. no. if you managed to get the belt on withiut prying the tensioner up, great(wow!! but great). that will not do anything to anything else. unfortunatley you would have been running off the battery. see if ... Chevrolet Cavalier

I need to remove my serpentine belt in order to replace my power steering pump but i cant find where my tensioner is and how to loosen it. i was told i need a special tool. what kind of "special tool"? oh yea its for a 1990 ford tempo


Usually, a 1/2 inch breaker bar will be useful in this procedure. ... 1990 Ford Tempo

Tensioner Pulley I need to replace the serpentine belt on my 92 Caprice.  Can anyone tell me how to go about loosening the tensioner pulley on it?  Sorry...I'm not being lazy, but my wife has the car and the belt snapped so I need to go replace it and I'm looking for what tools I will need, etc.  Thanks!


LET CAR BE COOL\015\012YOU WILL NEED ANEW BELT, OF COURSE.\015\012TOOLS: \015\012APPROPIATE CUBES AND RATCHED SET. AND AN ADDAPTOR TO FIX RATHED TO THE SQUARE HOLE IN TENSIONER PULLEY.\015\012REMOVE UPPER SIDE OF FAN COVER (YOU WILL CHECK PRINTED IN ... 1994 Chevrolet Caprice Classic

Does one need a special tool to loosen the tensioner on a 07 Dodge Nitro 4.0? The pulley on the tensioner is facing the engine making it difficult to use a wrench or ratchet on that pulley.


Yes there is a special tool kit. ... 2007 Dodge Nitro R/T

Timing belt tensioner loosening all the way for the belt to go on. Is there a tool that could help me cause a screwdriver is what i'm using to release the tensioner.


Most tensioners have a spot on the pulley to the tensioner where you can hook up a breaker bar to move the tensioner so you can slip a belt on.I usually just grab a crow bar, put a rag over the end and pry it open to get the belt on. ... 2000 Daewoo Lanos

A: ITS A TIMING CHAIN NOT A BELT AND WHY DOES THE BOOK SAY 60 BTC N IT MAKES NO REFERENCE OF MOVING IT TO 1 TDC ???? ALSO THE SAYS THE TIMING MARKS SHOULD HIT THE 5 OCLOCK POSTION FOR INSTALL ALSO HAVE THE TENSIONER SQWEEZED W TOOL I GOT THAT WAS EASY MOTOR IS 2.0 SUPERCHARGED ED.....05 ION REDLINE


Hello! I do not understand the reference to 60BTC... The timing chain has two colored links and one unique colored link...rotate crankshaft sprocket until matching colored links line up with the crankshaft mark at the 5 o'clock position...intake cams ... Saturn Ion

I have a skweal coming from a tensioner pully and need to know how to fix it and if there are any tools that are required that are out of the ordinary. Jon in Shoreline


Your going to need a wrench, 13 or 14 mm, and a star socket 50. Put wrench on center bolt of pulley to release tension on belt, if your just going to replace the pulley and not the whole assembly, the bolt on the pulley is left hand thread, the pulle ... 2001 Ford Ranger Regular Cab

Water pump on a scale of 1-10 how difficult is it to replace a water pump and aux drive belt on a focus 1.8 2003 petrol engine. I am not a novice, have some mechanical experience but have not worked on a newer ford. are any special tools required?


About 8, if you are methodical you should be ok. You will probably have to remove the cam belt. If you do you need a tool to hold the cams-the tool is basically a flat plate +/- 400 mm long and about 6mm thick which slots into the rear of the cams wh ... 2003 Ford Focus

Starter just clicks. loosen the belt tension and engine will start. turn engine off,remove tools and retension the belt, engine will start. volt gauge reads 15volts when engine is running. battery ??,looks good. could it still be the alternater or ??? tks.les


Seems like you have to shim the starter ... 1998 Chevrolet Blazer

Have oil leaking under rocker cover on my bmw 320 d 2001.is it that 1 of the injectors is leaking ,is this expensive to do .i work in an engineering firm is ther anything i could do at work to ease the costs.the reason i mention the injectors is a freind of mine looked at it and said someone has tryed to get one of the injectors out and failed causing more harm than good.it was also mention that a special tool is required to take out injector.


Injectors do not leak oil. they leak gas. If you are leaking oil then it is the rocker arm cover. replace the gasket easy to do. replace both because they come in a set. ... BMW 323

I changed the timing belt and locked up water pump on my toyota 4 runner 1990 v-6 3.0l today and for got to turn timing to 0 before loosening tensioner pulley and the cams both spun what do i do know? and where do i look to do it?


Find tdc (top dead center) and put it back on.. you will have marcs to line up on both cam and main ... 1990 Toyota 4Runner

Trying to get the belt tensioner loose so i can get the alternator changed, but there is no clearance to get any tool between there on a 1996 grand am v6. how do i get to the bolt to loosen the belt?


If you look carefully the tensioner will have a square hole. The hole 3/8 of an inch. A 3/8 ratchet will fit into the hole.If it doesn't have the hole than a 15mm box end wrench will need to be used. ... 1996 Pontiac Grand Am

I have a 93 audi 90 series V6 2.8L 5 speed. It needs a timing belt and will not start. What is the easiest way to change the timing belt, and what other components should be changed in order for the vehicle to be able to start? Do the cams need to be re adjusted, tension-er, pulleys? What types of tools are required as I plan to do this myself.


The only special tools you need are a harmonic balancer puller, and a gear puller (for the cam sprocket), you are probally going to have to remove, the altanator, your belts, a motor mount, timing convers, water pump, and maybe a couple other accessr ... Audi 90

How to repease tensioner ..and tool required - Envoy GMC Cars & Trucks


Here is how you replace it:\015\012\015\0121) Take the belt of be releasing tension on the tension pully and slipping the belt off the alternator pully (no need to take belt completely off)2) remove the center bolt on the pully and ... GMC Envoy

What tool to use to loosen the serpentine belt tensioner on vw jetta 97?


... 1997 Volkswagen Jetta

1) how to change transmission fluid for 2005 odyssey 2) What tools and parts required


... 2005 Honda Odyssey

On scale of 1 to 10 ten being most difficult how hard is it to change out brake pads on front and back of 2003 Hyundai Santa fe what tools are required / recommended. What brand of pads are best for this model?


Disc or drum brakes? If they are disc brakes and you have ever worked on brakes before then 1. If you are mechanically inclined and have access to a shop manual for your vehicle then 3. If you don't have a shop manual, have limited tools, no mecha ... 2003 Hyundai Santa Fe

I need to replace the fan belt on my 2007 VW Polo. I tried loosening the nut on the tensioner pulley, but I can't loosen the tension on the belt. How do I loosen the tension to remove and replace the fan belt?


... Cars & Trucks

I need to replace the fan belt on my 2007 VW Polo. I tried loosening the nut on the tensioner pulley, but I can't loosen the tension on the belt. How do I loosen the tension to remove and replace the fan belt?


... Cars & Trucks

Tensioner Removal Ok, I located the tensioner wheel and used a 15 metric wrench to loosen the wheel so that i maybe able to loosen tension for the belt. With doing this it had no effect on the the tensioner. My question is there is a bolt that is in the center of the tensioner that mounts it to the engine. I need to know what size bolt and what type of socket should I be using? I tried a great Neck T47, but it slips out and I dont want to strip it.


The 15 mm that is on the tension pulley is not to be taken off. put the bolt back in snug. put the 15mm back on it and pull upwards on the bolt/pulley and that will remove the tension fro the belt enough to remove the belt. and do the same thing to ... 1996 Mercury Sable

Tool required to replace serpentine belt on 1997 Ford 4.6 liter e


F-250 Belt Removal \015\012\015\012\015\012Install a 16-mm (5/8-inch) closed end wrench for 7.5L engines or a 15-mm (19/32-inch) closed end wrench for 5.8L and 7.3L engines on the tensioner pulley bolt and lift the t ... 1997 Ford F250 SuperCab

I HAVE A P0300 OBD CODE I DID A COMPRESSION TEST TO ENGINE AND IT PASS THE TEST,I DID CHECK EGR VALVE,CHANGE SPARK PLUGS,IGNITION WIRES, CAP AND ROTOR, I DID CHECK TPS SENSOR MAF SENSOR,FUEL PRESSURE,AND OXIGEN SENSORSI I FOUND THAT ON BANK 1 BOTH SENSORS (UP STREAM & DOWN STREAM )WORKS NORMALY BUT ON BANK 2 THE SENSOR 1 CHANGE FROM 0 TO 600 MILIVOLTS BUT NO CHANGES FROM RICH TO LEAN &SENSOR 2 HAS 0 MILIVOLTS & NO CHANGES FROM RICH TO LEAN SO I SWICHT SENSOR TO TEST THEM FROM BANK 2 TO BANK 1 AN


... 1997 Nissan Pathfinder

I need to install a new serpentine belt on my 95 regal. It says that it is a spring loaded tensioner on the idler sprocket, but cannot find a way to loosen the tension on it. Do I just loosen the nut that sets the tension between the Alt and the power steering pump? Or is there something I am missing


Look closely as there should be a square one half inch or three eighths inch hole in the tensioner. Place the proper sized ratchet or breaker bar in the hole and turn which ever way loosens the belt. When replacing the belt be sure the belt is prope ... 1995 Buick Regal

I need to install a new serpentine belt on my 95 regal. It says that it is a spring loaded tensioner on the idler sprocket, but cannot find a way to loosen the tension on it. Do I just loosen the nut that sets the tension between the Alt and the power steering pump? Or is there something I am missing


There should be a feature that looks like a bolt head on the pivot of the spring-loaded idler, which will allow you to move it so that you can put the belt on.Optionally, you can get a bar on it, push it against the spring so that you can ... 1995 Buick Regal
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8178 seconds