Having problems with your 1996 Eagle Vision ?

Front strut replacement - 1996 Eagle Vision

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Jack it up take the shock bolt out and the 4 bolts that connect to the body
Repair Help & Product Troubleshooting for 1996 Eagle Vision

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Front strut replacement - 1996 Eagle Vision


Jack it up take the shock bolt out and the 4 bolts that connect to the body ... 1996 Eagle Vision

I have a 1991 Lincoln Contenental and replaced the rear struts with conversion springs. The front still has the air suspension. The guy that replaced the rear struts unplugged the actuotor so no air is going to the front. I just need to locate the actuator to see if it will fill the front struts again.


It is on the strut along side the air spring you should be able to see the air line going to it and the connector. off white color ... 1991 Lincoln Continental

When I open the hood of my 2000 tdi beetle, and look at the upper front strut mounts, the cone around the strut bolt is loose on both sides. I had both struts replaced 2yrs ago. I just had my tires replaced and during the front end alignment, the mechanic said my strut mount on the passenger side was broken and needs repair to align it properly. I just looked and both of them from the under to hood and the upper cones are loose and free wheeling. they almost look either upside down or should be


The cone naturally has some clearance between the body. on the underside of what you see is a rubber bushing called the 'upper strut mount' these are a commonly replaced item. you need a spring compresser to get em out. ... 2000 Volkswagen Beetle

Since my front struts were replace, I've had this rubbing sound coming from my front end. I've had my brakes and struts checked (by the shop that did the replacement) and have been told there's nothing wrong with my brakes or struts. What could be causing this annoying sound and should I be worried?


Rubbing noise or grinding? Is it louder going around corners? It sounds like it could be the wheel bearings, and if it is indeed the wheel bearings, then yes, you need to get them replaced asap. Wheel bearing failure can cause the wheel to come of ... 2002 Chevrolet TrailBlazer

Continuation of 1998 Plymouth Breeze Stiff Steering Issue Well, we ended up replacing basically all of the front end of this 1998 Plymouth Breeze because it was totally worn out. We replaced the front motor mount, the rear motor mount, upper ball joints, front struts, both CV axles, both control arms (lower ball joints), the Rack & Pinion and Tie Rod ends We even replaced the water pump and timing belt because the water pump was leaking and since we had it open, we replaced the timing


First, the mechanic has no idea what that switch is most likely. I have several Rack and Pinions for dodge and Plymouth vehicles and none have any electrical on them however I have seen some that do and having looked at these I'm pretty sure it is a ... 1998 Plymouth Breeze

RIGHT FRONT STRUT LEAKING AND RIDE IS DEFINITELY AFFECTED. IS IT NECESSARY/SMART TO REPLACE BOTH FRONT STRUTS IF YOU HAVE TO REPLACE ONE???


Might as well if ones gone the others bound to go soon anyways ... 2001 Lexus RX 300

I got all 4 struts replaced within the past 2 weeks. My car now has a slow oil leak coming from the front driver's side of the car. Also, there is a metal on metal grinding sound coming from the front drivers side. Should the place that replaced the struts be responsible to fix these problems free of charge? I have never had a problem with oil leakage before this. It is a 2003 Nissan Altima


They might have damaged something while jacking it up... \015\012if you can prove they damaged the car then they have to rectify it. \015\012simple as that. \015\012\015\012Oil leak could be sump or gearbox - depending on where they put the jac ... 2003 Nissan Altima

Front struts may need replacing, what is the expected cost to replace front struts by a shop?


Depending on your location and what you may need additionally like strut mounts or stabilizer link pins would budget around 300-500 for this type of job. ... 2002 Toyota Camry

My 2006 Chevy Equinox has problem with ABS and Traction control lights on, and as vehicle brakes to a stop, the ABS kicks in and the vehicle does not brake - sometimes scary as you nearly rear-end the person in front of you. The diagnostic tester indicates front left wheel bearing - always. But the gargae has replaced both front wheel bearings (with speed sensors) twice each. Also, the ABS control module was replaced, and the struts were replace, and we rotated the tires. All of this over ab


Hello! Since the fault is affected by disassembling then re-assembling I strongly suspect a faulty connector...A loose or bent pin, poor crimp, broken wire inside it's sheath or harness that is damaged by a tight bend...The wiring involved are cable ... Chevrolet Equinox

I have a problem with the front end of my station wagon I have had some work done on it recently the front struts replaced left hand upper & lower ball joints replaced & sway bar bushes replaced it keeps running off to the left I have had It back 5 times to have the alinement fixed but it is still running off to the left hope you can help me. regards Bruce Roach email [email protected]


Try different aligment shop.. Possible sterring wheel problem. ... 2005 Ford Futura

I am having a "problem" with the struts on my 2006 Mazda Tribute. The rubber boot that covers the strut has broken loose on both side on the front and they make a rattling noise every time you hit a bump. This is driving my wife nuts. From what I can see that boot is a seperate piece from the strut and can be replaced. No mechanic seems think so. My question is two fold. Can the boot be replaced?what is supposed to keep the boot in place?


The boot protects and keeps the strut shaft clean if not totally destroyed silicone and zip ties should stop problem-to replace need to remove strut ... Cars & Trucks

I just got my front brakes replaced on my 2000 Toyota Camry. It has less than 80,000 miles on it. The mechanic said that there had been only 1/32nd" left on the front, but the back brakes were fine. However, there were a few other problems that came up. I would just like to know if what the mechanic said was just a way to get more money, or if there really is a potential problem. Here's what he said: Front & Rear Strut Replacement Rear brake clean and adjust Brake fluid flush Alignment Fuel Filt


To test struts use your body weight to bounce the struts if the vehicle bounces up and down instead of stopping bouncing straight away they need replaceing.If rear brakes are drum brakes then wouldnt hurt to clean and adjust however when you reverse ... 2000 Toyota Camry

2000 Lexus ES300 - 45K miles. While driving over small bumps, the right front strut and sometimes left front strut makes a rattling noise as if something is loose. I have also heard same rattling noise in 1998 Lexus ES300 model car. Any ideas on how to fix? Replace strut mounts, etc.? Thanks! Mark


Are you sure this is a rattle or is it more of a creaking noise? I have a 2000 ES300 and had an issue when I would go over speed bumps and the noise would drive me nuts! However replacing the bushing in the top of the strut mount is expe ... 2000 Lexus ES 300

Noise coming from the front when I hit bumps on the road. I suspoect my front struts are bad. How can I check and or replace my front struts?


You can check them yourself by asking a couple of hefty lads to push down on the front(one side at a time)and then letting go quick.it should go up, then down, then settle,no other movement,unless faulty.(dampers)AND while they are bouncing your car ... 2006 Chevrolet HHR

Noise in front suspension when traveling over bumpy road. have already replaced struts. car has 177,000 miles on it and just replaced the struts. no other suspension parts have been replaced. seem to hear a lot of road noise from within - did not hear when newer.


Could be your rackin pinion or cv axles ... 1998 Chrysler Concorde

My 1996 Cad Concours has wheel ***** on right front wheel.I replaced rotors and rotated wheels but sill have the problem.Could it be my front strut? Do the struts have air and oil inside.I think I see oil on the front right coil spring.


HI. There is a missing word in your initial posting above. If possible, could you clarify your issue?What is actually occurring at the front right wheel assembly? ... Cadillac DeVille

The cost of replacing the front struts, inner tie rods,and front ball joints for 98 geo metro


... Cars & Trucks

Should I replace the cv joint when i replace the front struts?


... Pontiac Sunfire

Replacing front struts


Okay....here is the steps first....and then the directions on how to use the tools:\015\012\015\012\015\012Raise and properly support the vehicle. \015\012Remove the front wheel. \015\012 ... 1998 Toyota Tacoma

Strut problem I have a Volvo 2004 S60 Turbo. Have taken my car in three times, with the last time being very expensive, to stop a popping noise around the front left wheel. They felt sure everything was fixed but now it is again popping. Is a bad strut system dangerous? Also, my radio won't turn on at times, and a fan was replaced in the dash in front of the passenger seat. I was told it was bad fan but about every ten seconds I hear what sounds like a scratching noise. Or a "urrgg" noise. If I


... 2007 Volvo S60 T5 Sedan

2005 Dodge Grand Caravan - had struts replaced at about 65,000. Whenever the weather gets cold, the front end clunks going over bumps. Strut mounts replaced several times, but doesn't help.


Unless the strut mounts are improperly installed, I would check swaybar links and bushings, and outer tierods ... 2005 Dodge Grand Caravan

After having front axel replaced front suspension has no shock absorbing qualities. Prior to work all was just fine and rode smooth. Now it's like the body is directly riding on frame. I suspect struts did not return/uncompress from work. Are struts damaged during compression or can they be uncompressed somehow? thanks


Depends how long the struts were laid flat,you should extend them and compress them about 10 times before fitting,in the upright position.you cant damage them,if you feel like running on frame then suspect springs not shockers,as springs hold the bod ... Cars & Trucks

Instructions for installing 2001 gs430 struts type Monroe Sensi-Trac front & rear. What all has to be removed. Would this also be a good time to replace the wheel bearings at 160K or is repairs unrelated? Any other items to do during strut replacement that this repair makes easy?


Be carefull , you will need spring compressor tools to do the job. The springs are compressed quite a bit and if you just undoo the top nut for the strut , you could kill yourself. Don't doo wheel bearings unless you know they are bad. ... 2001 Lexus Gs 430

How do I replace my front and rear struts on my 91 geo prizm? Is it easy to do? Do I need more than just the struts or is there more pieces to it that need to be replaced with it?


About struts..if only replacing the strut you will need a spring compressor[ extreme caution] must be used .spring is under extreme pressure [never remove top center nut ] unless it is in the spring compressor.It isn't hard to replace the complete st ... 1991 Geo Prizm

Replace gas filter for 1996 eagle vision tsi - 1996 Eagle Vision


It is under the driverside door mounted to the frame ... 1996 Eagle Vision
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.8949 seconds