Having problems with your 1996 Buick Skylark ?

Removal of serpentine belt on a 1996 Buick automobile?

\015 How do I remove a serpentine belt on a 1996 Buick Skylark Custom with 2.4 liter engine?\015
Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Check if it has a tensioner, it look like a useless pully and put a breaker bar on it and pull it and the belt should loosen up, if theres no tensioner the alternator should have bolts to loosen up the belts.
Repair Help & Product Troubleshooting for 1996 Buick Skylark

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Removal of serpentine belt on a 1996 Buick automobile?

Check if it has a tensioner, it look like a useless pully and put a breaker bar on it and pull it and the belt should loosen up, if theres no tensioner the alternator should have bolts to loosen up the belts. ... 1996 Buick Skylark

In order to replace the serpentine belt on a 1994 Buick Skylark It appears that something has to be removed in order to remove the belt and replace it. What exactly has to be removed?

Nothing has to be removed. Just relieve the tension on the belt and it will come off. Find the tensioner pulley and pry it back. Look for a square hold where you insert a 1/2" ratchet. If you find none look for a way to pry it back. All you have to d ... 1994 Buick Skylark

Serpentine belt I have a new serp belt and I have been told that I do not need to remove the motor mount the car is a 1995 Buick Park Avenue. Is there a way to get the belt on without taking the motor mount off. If any one can help me please. Thank You John P.

You do not need to remove the mount, but one of the bolts on the lower portion of it. You will need to remove the 15mm nut, then the stud comes out with a reverse torx bit. The collar in between the mount will come out with some work. Then you can ... 1993 Buick LeSabre

1993 buick skylark serpentine belt removal

There is going to be a tensioner pulley near the front of the motor on top that you have to apply pressure to or you can loosen the alternator and take it off that way,just remember how it came off so you can put it back on ... 1994 Buick Skylark

Do i have to remove the motor mount to loosen the tensioner pulley to take the serpentine belt off of my alternator on a 1997 buick skylark

Yes,\015\012to do so the engine will have to be supported.\015\012\015\012Hope it will help\015\012Dan ... 1995 Buick Skylark

Motor mount removal or not to replace serpentine belt on non supercharged 97 Buick Riviera

... Cars & Trucks

How do you remove a serpentine belt from a 91 buick?

When looking at the front of the engine you will see one of the idler pulleys will have a 3/8 square hole in it,thats for a 3/8 breaker bar or ratchet to fit in to ..hook up the tool and move counter clockwise to rotate the tensioner so you can remov ... 1991 Buick Regal

How do I install a serpentine belt on 97 buick skylark? Do I remove motor mount?

Hello\015\012Yes remove the motor mount.You need to have it supported with a floor jack first.\015\012\015\012Here is a step by step link to help guide you.\015\012\015\012Good luck\015\012 ... 1997 Buick Skylark

How do I remove the serpentine belt - Riviera Buick Cars & Trucks


Howq do I remove serpentine belt on my 1999 buick La saber

Find the tensioner it will be a pulley that does nothing but put tension on the belt. There should be a square hole in it. that should fit a 3/8 inch drive socket wrench or breaker bar. Use that to remove the tension from the belt and remove - do the ... 1992 Buick LeSabre

How do I replace the serpentine belt on a 1998 Buick LeSabre? In particular, where exactly is the engine mount bolt that I need to remove?

Who told you you had to remove an engine mount bolt. I replaced a serpentine belt on a mercury grand marquis and it i was just a matter of relieving the tension on the tensioner pully and positioning the new belt back on. I actually used my waistbe ... 1998 Buick LeSabre

How do I change the serpentine belt on a 1996 Buick Riviera? I have removed the nut off the stud on the bottom leg of the cast bracket. I can't get to the stud and how do you get it out without damaging the threads on it?

As an ex dealer tech we use to hate that design. All of us ended up purchasing a stud removal tool that would take it out without any thread damage and it made into a fairly easy job.In your case after you have loosened up everything you ... Buick Riviera

Do I have to remove the air conditioner compressor on a 1996 buick roadmaster so I can install a air conditioner bypass pulley for serpentine belt?

Yes, the bypass pulley fits into the same area that the compressor will have to be removed from. If it's for fuel efficiency, some people just remove the wiring/plug from the compressor and tape it to the side so that it won't engage, if the ... 1996 Buick Roadmaster

Remove and replace the water pump buick rendezvou 2003 cost and do it yourself instructions . can i do it myself concerned with loosening the serpentine belt and needing special tools?

1. Drain the cooling system until the coolant is below the level of the water pump. 2. Remove the drive belt guard. 3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove the water pump pulley bolts. 6. Remove the water pump pulle ... 2002 Buick Rendezvous

I have a 2003 buick lesabre and I need to find the serpentine belt diagram, the diagram that is suppose to be on the car has been removed by the dealer.

I have it\015\012\015\012 but i need a good vote before i can show you ... 2003 Buick LeSabre

Replacing serpentine accessory belt. Is it necessary to remove motor mounting brace to remove and install new serpentine belt?

From my understanding I think you have to remove the motor mount and mount the engine to remove it because I have been asking different mechanics about the serpintine belt on my 1998 Buick Lasabre. ... 1998 Buick LeSabre

1997 Nissan Altima 2.4L serpentine belt and ac belt replacement. How do I do this? I have removed the damaged alternator and have a replacement along with the belts but cannot see the belts well. Do I need to remove the ac unit also or is there an idler that gets moved? I cannot raise the car, so can all of this be done above the engine? Would it be better to tow it to a garage and pay to have it done?

There is an idler pully for the AC belt and im sorry this will have to be done from underneath the car because the idler pulley is on the very bottem. if you can jack it up. and put some stands underneath and it should be no problem. refer to this li ... 1995 Nissan Altima

Hi, I have an 05 Canada built Corolla CE. Early in the morning a soft squeek sounds from the serpentine belt area. After warming up the sound disappears. Several months ago I removed the belt and could not determine the cause. Today I removed it again and the belt roller between the alternator and the air conditioner feels a bit rough. What is driven by this roller, is repair urgently needed, can I fix it myself an what (if I can fix it) do parts cost or (if I can't) does a repair cost? I wo

The pulley that you mention sounds like an idler pulley. They do fail, replacement is usually quite easy, Typically you get t new bearing and pulley assembly, and it just bolts in place. \012\012Do replace it. failure really wrecks stuff ... 2005 Toyota Corolla

I have a tight area to work in in changin the serpentine belt on a 2002 Geo Prizm. I removed inside wheel panel to gain better access. The pulley nut that I should be turn clock wise seems to only loosening instead of opening up the tension so that I can remove old belt and install new belt. What gives?

You need to loosen the upper and lower mounting bolts before the alternator will move.Top takes a 12mm wrench and the bottom, two 14mm wrenches.Also you may need to loosen the upper belt adjuster as well[12mm wrench] to get the alternator to move.Tur ... Geo Prizm

Broken belt on 1992 Chevy S10, 4.3 liter, 6 cylinder. Could it be any other belt other than serpentine? Money is tight and I want to know if it could be any other belt than the serpentine. I removed several small pieces and one thin one wrapped around the inner side of the fan blade.

There is only one belt, so you cant be wrong, although there are pulleys that tension the belt, feel all of them and be sure they spin freely without any noise. belts usually dont just break. ... 1992 Chevrolet S-10

Need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

\015\012Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question. ... 1994 Ford Taurus

Change the serpentine belt on a 2000 Buick Regal

Yes, just remove reservoir, 2 bolts i think, and move it enogh to det clearance. ... 2002 Buick Regal


You should look for spring loaded tension pully .in this pully you will find a square hole put a 1/2 inch drive ratchet (no socket) into this hole & apply pressure until belt loosens don't forget remeber the way belt came off ... 1995 Nissan Maxima

Must replace serpentine belt on 99 Buick Lasabre

This is a 99 lesabre? You don't have to remove the mount. Look in through the wheel well and remove the nut on the mount that is between the crank pulley and the a/c compressor. After you remove the nut, remove the stud with an inverted torx bit. Wh ... 1994 Buick LeSabre

Serpentine belt 1997 Buick LeSaber needs serpentine belt. How do I get it pass the motor mount?

You actally have to take the Motor Mount off. The way I did it was to remove the Front Right Wheel and the Plastic Guard. There you will see the Motor Mount and the Bolt that needs to be removed. Once removed, the melt piece betwee the bracket and ... 1997 Buick LeSabre
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.1764 seconds