Having problems with your 1995 Toyota Camry ?

I am having difficulty installing rear brake rotors over the parking brake pads. The star wheel adjusters are all the way in and the new rotors do not want to go on over the new pads

Posted / edited by AnonymousUser on : 11-12-2017

Answers :

You have to loosen the emergency brake adjustment on the cable give it some slack push the shoes together by hand and rotor will fit . please dont forget to rate this answer . hope this helps
Toyota
\015\012
\015\012Remove the old Brake Pads\015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Park your vehicle\015\012 on a level surface. If you have a stick shift car make sure the car is \015\012in gear. Place blocks in front of the front tires so the car does not \015\012move while you are working on it.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Open the hood of your car and locate the master cylinder If \015\012necessary, remove brake fluid until the level in the container is less \015\012than half full. A turkey baster is a good tool for this. Put the brake \015\012fluid in the plastic container and dispose of it the way you dispose of \015\012motor oil.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Raise the rear end of your car with your car jack. Remove the rear tire or wheel assembly.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Use the socket wrench to remove the caliper mounting bolts. \015\012Slide the caliper off of the disc rotor and hang it in the wheel well \015\012with a small bungee cord or wire hanger. Do not let the caliper hang \015\012from the brake hose.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Remove the brake pads from the caliper. Also remove any shims, springs, wear indicators and support plates from the caliper.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012Install the new Brake Pads\015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Return the support plates to the caliper bracket. Place the \015\012wear indicators from the old brake pads on the new brake pads making \015\012sure the arrow on the indicator plate points in the direction the tire \015\012rotates. Place the shims on the outside of each brake pad and insert the\015\012 pads into the caliper bracket.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Use the recommended piston caliper tool to turn the caliper \015\012piston clockwise while pressing it into the caliper bore. Place the \015\012caliper over the brake pads. Insert and tighten the caliper mounting \015\012bolts.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Replace the wheel assembly (tire). Lower the car to the ground.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Pump the brake pedal a few times to seat the brake pads. Do this before trying to move your car.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Add fluid to the master cylinder container to replace any you removed before you removed the old brake pads.
    \015\012\011\011\011\011\011\011\011
  • \015\012\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\015\012
  • \015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011\015\012\011\011\011\011\011\011\011\011Season the brake pads by making only gentle stops when you \015\012are driving for the first week after you install the new brake pads. Try\015\012 not to do any hard stopping when you are seasoning the brakes.



  • Repair Help & Product Troubleshooting for 1995 Toyota Camry

    Tips for a great answer:

    - Provide details, support with references or personal experience .
    - If you need clarification, ask it in the comment box .
    - It's 100% free, no registration required.

    Suggested Questions/Answers :

    Loading ...

    • Start your question with What, Why, How, When, etc. and end with a "?"
    • Be clear and specific
    • Use proper spelling and grammar
    all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
    Load time: 0.0117 seconds