Having problems with your 1995 Oldsmobile Eighty Eight ?

Have codes p1640,p1650,p1670,p1860,p1200 where do i look

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

You need a new computer
Repair Help & Product Troubleshooting for 1995 Oldsmobile Eighty Eight

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

It all started when my daughter let her boyfriend drive it here's the story! they were driving around and noticed they were getting low on gas.They stop in a driveway and her BF reveided the snot out of it and then it died.It was towed home and I myself looked things over,here's the list fuel pump,injector pulse and fuel pressure good,did a compression test that was good looked at spark plus good check engine OB2 code(trouble code and found PO1776 & PO1777 looked in manuel couldn't locate such c


Not for sure but some cars have a reset switch for the fuel pump. I would chech manual but they are usually in the truck somewhere ... Cars & Trucks

2006 ford explorer computer location? I looked behind the seat belt panel on the passenger side and can't find the factory code to reset keyless entry key pad. I see what looks to be a silver module but again there doesn't seem to be a 5 digit code. I have no record of any other codes and I bought the car used from a dealer.


How do you change rear wiper motor on 2006 explorer? ... 2006 Ford Explorer

Transmission i have had the check engine on for a while and when i got the code read at my local auto zone they told me it was a silenoid inside the transmission, i cant find it i dont know what im lookin for, and mainly what my car does is that it kinda jerks when im stopped, i also have another code and it tells me its a large gas leak, i alredy replaced the gas cap. it wont pass smog, ive done and looked at everything that i can possibly look at. help!!!!!


From the sounds of things you don't really know what your doing. I would advise you to take it to a mechanic but not a dealership. The large fuel leak has to do with the venting system for the gas tank, something in there isn't sealing properly anymo ... 2003 Dodge Durango

I changed my car battery to my 2005 honda civic value package and the radio is asking for a code i looked every where fr the code and i still cant find it and i dont have the money to pay the dealership to look at it! can you help


Call the american honda at 1-800-999-1009. they will ask for your name, address, etc and the VIN and give you the code. the service is absolutely free. thats how i got mine. good luck! ... 2001 Honda Civic

Wont Start I own a 98 Plymouth Neon, I was driving along at 120 and boom the car shuts off. I am getting the codes 12,25,54. I looked the codes up and found a mechanic that took at a look at it for free. He didnt remove the timing belt cover, just stuck his finger inside and told me to try and start it. DIDNT START, Than he said when the timing belts goes, the valves drop and the piston crushes them. Is this true? He told me I need a new engine, is there any other way I can fix the problem mysel


Yes unfortunately when the timing belt goes on your make and model car\015\012the valves will contact the pistons however there is likely only damage\015\012to your valves and not the pistons....so you will want the mechanic to\015\012preform a compr ... 1987 Dodge Raider

Hi, i have a hyuindai tiburon, 2L,16V, engine code G4GF,Ihave a cracked manifold, as my cat is biult into the manifold, i need to replace it? So iwas looking for one to give me better performance? Maybe a highflow cat, i,ve been told an ELANTRA ONE WILL DO THIS ? i,ve been looking at one, Eastern Catalytic converter code 40581, they say it will bolt staight on, although the cat is not high flow, eventhough thier adert says it is??? Any idea,s ???? thanks


I would replace it with a Magnaflow or Flowmaster catalytic converter. Much better quality and performance. Click on the link below to view:\015\012\015\012 ... Hyundai Tiburon

2006 chrysler sebring. Check engine code 303. Had plugs and wires replaced. Still have code. Had engine checked, 3rd cylinder has 80psi. Mechanic said next step is to take off header and look there. It would cost me $1000 just to look not fix. Any suggestions???


... 2006 Chrysler Sebring

Ok I?m getting a p1297 code and then I?ll start getting po301 If I erase the codes then start the car and let it idle ill get the po300 po301 po302 po303 Then drive the car ill get the p1297 If I erase then drive ill get the p1297 first then the po301 and so on I?m looking for a vacuum Leak but can?t find one I?m changing the coil packs around but it isn?t changing anything the car Drives great but has a slight miss at an idle can anyone give me a clue as to what to look for or What to do next i


Clean the EGR valve seat. The EGR may have become stuck. A good way to check for vacuum leaks is to use smoke near every intake vacuun hose . And near the intake manifold. The valve will **** in the smoke. If you clean the EGR valve and it still miss ... 2001 Volkswagen Beetle

2001 subaru forester fuel delivery problem. Checked the codes with a snapon scantool and found a low cat code very common. Looked at O2 sensors and saw one reading barely out of range replaced it. Noticed old o2 sensor was white. Did not fix problem, look at spark plugs found cylinder 3 to have a white plug as well. Check injector seemed to have no flow issues. switch injector 1 and 3 to be sure. Still have same problem car stumbles from a stop and sometimes climbing hills.


White sparkplug indicates coolant in the combustion chamber, ... Cars & Trucks

Wont start I own a 98 Plymouth Neon, I was driving along at 120 and boom the car shuts off. I am getting the codes 12,25,54. I looked the codes up and found a mechanic that took at a look at it for free. He didnt remove the timing belt cover, just stuck his finger inside and told me to try and start it. DIDNT START, Than he said when the timing belts goes, the valves drop and the piston crushes them. Is this true? He told me I need a new engine, is there any other way I can fix the problem


Bad News! You need a New Motor! The Mechanic is Correct. Not a Whole lot else that you can do. ... 1998 Dodge Neon

I'm looking for a code to get my stereo working again after battery replacement. If this code is located in the manual where do I look? Thanks so much!


The code will not be in the manual unless the previous owner wrote it there. Call the dealership that the car was bought from or if you have no clue as to where that was call the manufacturer. Have your VIN and the radios serial number. ... 2007 Hyundai Sonata Limited Sedan

Im looking for a honda accord 2001 radio code as I've lost mine. I've looked under the ashtray, only has 1611 which didnt work. Phoned Honda they couldnt help 'cos I didn't buy it at the garage. please help find this code to unlock my radio.


Well a good dealership will help you out....and bare in mind they are the ones that have all those codes.\015\012\015\012The dealer you contacted most likely wants you to bring it in so they can charge you to get the code and fix your pro ... 2000 Honda Accord

Abs codes i have a c 5500 gmc and are looking for a place on line too look up code numbers


... 2005 GMC Sierra C/K3500

00 Chevy 2500 4x4 6.0 has intermittent oil burning and cold start lifter chatter and takes a second to pick up oil pressure but quiets down after a few seconds and runs quieter than my 02 4.8 with half the miles. Are 6.0 valve/rockers adjustable? Also like to know what trans my 00 2500 4x4 has..is there a way to visual determined this or code to look for? If code where do I look for it? Has fact trans temp gauge in dash


Try adding some valve & lifter top oil to your oil.If you ever take the oil pan off, remove the oil pump pickup screen and clean it. You can also try a lighter weight oil.If you take the VIN number to your chev dealer parts dept they can ... Cars & Trucks

My 97 grnd cherokee misses and dies occaisonally esp when I make a left hand turn and I am accelerating, I have look up the pcm codes and get 12,43,21,55. I have looked up the codes and have missfire on a couple of cylinders,and battery disconnet to pcm. I have replaced the rotor, cap and harness and checked all connections from the battery all the way though to the Pcm and checked the pcm for shorts. This has been going on for over a year, I am reluctant to start changing sensors or the pcm unt


Try this,run a heavy wire,about 10gauge or bigger,from the negative battery post,to the engine,and to the frame,and the body.One to another will do fine.Bolt them to a good known ground.Then ,run a wire from the engine,to the brake master mounting nu ... 1997 Jeep Grand Cherokee

Wont start I own a 98 Plymouth Neon, I was driving along at 120 and boom the car shuts off. I am getting the codes 12,25,54. I looked the codes up and found a mechanic that took at a look at it for free. He didnt remove the timing belt cover, just stuck his finger inside and told me to try and start it. DIDNT START, Than he said when the timing belts goes, the valves drop and the piston crushes them. Is this true? He told me I need a new engine, is there any other way I can fix the problem


Yes unfortunately when the timing belt goes on your make and model car the valves will contact the pistons however there is likely only damage to your valves and not the pistons....so you will want the mechanic to preform a compression test to confir ... 1998 Plymouth Neon

My son lost both sets of keys to my 94' Corvette and can't find the key code. No one seems to know the key codes not even GM. What's the deal? Can't get it through the VIN # either. $500 or more to take it in to have it coded because there 15 different codes. Someone must know the codes. What does the code look like?


Your local Locksmith can get the code and make another key, cost me 25 dollars for the key. Its probably a code 9 ... 1994 Chevrolet Corvette

I checked for blown fuses in my 1999 Buick Lesabre Limited and I turned my car on and the radio said ''loc''. I looked in the owners manual for assistance. It told me to enter the lock code that was the default or if I had a specialized code to enter it in. So I tried the obvious answer. Enter the code as 1999 the year of the car did not work. I just need to figure out what the default code is. I never set a code for it in the past.


It looks like it's a 6 digit code,according to a couple websites.\015\012I did find a blog post where someone called the dealer and they provided it apparently at no cost so that is at least worth a shot if you haven't tried already.If they do ... 1999 Buick LeSabre

Trouble codes I have a 2000 Jeep Cherokee Sport 4WD I-6 with the check engine light on, checked codes and found the following codes are present...P0441 and P1494. I looked all over and get tons of code definitions and ''replace your gas cap'' statements (already replaced the gas cap and codes are still there) but no other possible fixes, can anyone out there give me any idea of what part to replace to fix this? Thank you. -Nathan


P0441\015\012Evaporative Emission System Incorrect Purge FlowP1494\015\012\015\012\015\012\015\012\015\012Jeep:\015\012Leak detection pump pressure switch or mechanical fault\015\012U either have a leaking fuel system or the p ... 2000 Jeep Cherokee

Code 41 i was told ecm but their is no skip or jump engine sounds fine but the sevice engine light is on and i have the gm key to pull codes and a code 41 came out and other sites are saying ecm and i called other auto places and they said i have a ignition problem the wires look new and they person i just bought the car said he did the wires but didnt do the spark plugs so if u have a code book or can help me with this code 41 it weird to the title to the card says buick park ave electra but on


Code 41,error ,Camshaft position sensor \015\012.Under hood, passenger side, upper engine area, between cylinder he ... 1989 Buick Park Avenue

On my 1997 Saab 900 SE I put the wrong code in to many times and looked my radio out - I pulled the radio out got the code right but it still won't give me the code desplay so I can ebven inter the code. the anti theft light is not on either ,but no code is coming up on the display. I disconnected the battery held the cables together. I (did not) checked the fuse but I What do I need to do?


IF YOU CHECKED FUSE THEN YOU HAVE A GROUND OR CONSTANT POWER WIRE MOVING OUT OF WIRE HARNESS BEHIND RADIO. MAKE SHURE ANTENNA IS PUSHED IN RADIO GOOD BECAUSE THATS PART OF THE GROUND. ... 2000 Acura 3.5RL

Is the igntion key code and the keyless remote code the same if so where can i find it looked under trunk


You do not say what kind of vehicle and why the dealer could not issue a new key using the VIN. I know of no manufacturer that writes down the codes anywhere in the vehicle. The keyless entry is controlled by it's own module and is verified by the m ... 1998 Lincoln Continental

Have a transmission code P1750 on 1998 Mitsi Ecplise Spyder GS . I had the transmission rebuilt about a year ago,the check engine light came on and I had it diagnosed .The mechanic checked it out and said it was a code P1750 . I looked at similar prblems with this code and most people say this is a solenoid box assembly problem . What is code P 1750,what is the fix and what is a ballpark amount to fix this ? Thank You for your responses !


P1750 is a Manufacturer Control Transmission. i work at advance auto parts and we get these codes in from time to time. what i tell people is alot of times it is infact your solenoid box assemble is going. what that does is to tell your transmission ... 1996 Mitsubishi Eclipse

2000 Isuzu Rodeo, 3.2, 112,000 miles, Service Engine Soon light is on, won't pass inspection till I get it cleared off. Hooked up a scan tool the only code is P1340 and it scan tool says it's a Manufacturer Specific Powertrain Trouble Code. Not listed in Haynes manual. Cleared the code with the scan tool and it came back within the same day about an hour later. Anyone have a reference to what code P1340 is? Something I can look into myself? What repairs need to happen? Estimated Costs? Johnny --


Well clear code and drive it about 50 to 100 miles to try reset the monters and see if light stay out if so go get it smog so the system that could couse this is a bad wireing harness this may be hard for you to diagnosis this system put if you want ... 2000 Isuzu Rodeo

I have an eagle vision tsi 3.5L. My engine light is coming on. I clicked my ignition key forward three time to get my trouble codes, My codes are 12, 33, 21, 66, 66, 55. 12 and 33 are not my problem. its codes 21 and 66. 21 is Oxygen sensor input voltage maintained above the normal operating range or lower than minimum required switching frequency. 66 No messages received from transmission control module. Can anyone help me know what to look for or how to fix these code problems


... 1994 Eagle Vision
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2333 seconds