Having problems with your 1995 Mercury Mystique ?

Not getting power to the ignition coil

\015 I'm having trouble checking the 4 wires going into the coil. The manual only shows a 4-cylinder model, which only has 3 wires.\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

You need quality factory manuals, copy writed by ford,
& sold by Helm.Com ,so you have the correct & usable
reference material needed to work on your car
Repair Help & Product Troubleshooting for 1995 Mercury Mystique

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I was driving home the other day in my 1987 Ford Ranger when it died on me. I checked the ignition coil but was getting no power so i changed the control module and the ignition coil. I still aint getting any power to the distributer. I have power going in the ignition coil but none coming out. What else could be the problem? Oh and it does have gas.


Distributor contact to the tfi module is probably corroded and not making contact. Replace distributor. ... 1987 Ford Ranger

No spark I can't get any spark from the ignition coil . I've changed the coil, checked the distributer cap, but no power is getting to the coil, everything appears to be connected properly. What am I missing? Is there an ignition module or a computer component somewhere?


I had the same problem with a 94 Caravan, turns out the main computer was Dead, went to the junk yeard picked up a 50doller one, and was back in action. ... 1990 Plymouth Voyager

Ok i gotta 91 TT and i replaced the ignition coil connectors and the ignotion coils themselfs, now its seems as two of my ignition coils wont get power to them to create a spark on my sparkplug (of course)...so does anyone know what could be up with this? trying to get my baby back on the road, need help asap, thank you


Ptu (power transistor unit)\015\012\015\012http://www.mdsmarthome.com/z/Z%20Tech/Z%20Tech%20PDF's/PTU%20Repair.pdf\015\012\01 ... 1991 Nissan 300ZX

Im getting no spark to the spark plugs and it has electronic ignition and has power to the coil but i dont know how to test the coil or the componets to see why im not getting power to the plugs


Take the coils off and take them down to a local AutoZone or Advance auto...they will do it for free. ... 1985 Chevrolet Caprice

I have a 1992 jeep cherokee 4.0 inline 6. i am having the same starting problem as everyone else. while driveing it shut off i got it started 15 mins later it did this til i got home. ever since it hasnt started i have replaced the distributer cap, coils, battery, ballast resistor, and camshaft sensor. i came to find out that my ignition coil isnt getting any power and neither is my block sensor that hooks up at the top of the engine on the driver side that runs into the car isnt getting power


Try unplugging the ECU wire harness from the ECU, clean the terminals and screw it back on tightly. Might be a bad connection at the ECU. Also, I have no idea what 'block sensor' you are talking about and that jeep 4.0 has a crankshaft sensor bolted ... 1992 Jeep Cherokee Sport

96 pontiac grand prix se 3.1 service engine light is on and flashing. car runs bad. sometimes it has no power to get up an go. goes through alot of gas and smells of fuel bad. had it put on computer all kinds of codes came up. mass airflow, egr valve, ignition coil, coil module, cylander #3, multiple missfire. bought the ignition coil didn't need it. check coil modules all are working fine. any help?


... Pontiac Grand Prix

What fuse goes to the ignition coil? when i got this car, the fuel pump wasnt getting power from the fuse box and im not getting spark. im guessing the fusebox is the culprit on why im not getting spark. and how do i check if the coil is getting spark? 1988 jetta GLi


You can take this off and have it checked out at you r local auto shop. Most likely if you're not getting spark, the coil is bad. You can check it yourself through a backyard mechanic way, but it can give you a shock if not careful. ( a screw driver ... 1988 Volkswagen Jetta

I have a 1995 Ford F350 with a 5.8 liter. The truck died. I replaced the coil, ignition module, coil pickup. I still dont get spark. It is getting power to the coil. and all the ohm readings are within spec.


The ignition control module what went on mine 76 bucks . Then the temp sensor for the computer. ... 1995 Ford F350

My 6a12tt is not getting any spark to the coil pack from the twin plug igniter pack, replaced igniter pack with a second hand one and ran fine for a bit and then lost power to coil again, droping cylinders. What would be causing igniter pack to stuff out?????????


COULD BE BAD COIL OR LOOSE WIRE BAD CONNECTION TO COIL OR IGNITER ... 1995 Mitsubishi Galant

My husband states no power in fuel pump;has no power in igniction coil;has no in starter--only does click,click. that all he has checked so far.Scanner does not give out any codes. Comments: Jun 25, 2009- it cant be the battery because--my husband runs a ground wire to relay of starter and it starts. But--it wont get power to start fuel pump or ignition coil. it will start sometimes and then stops after 5 minutes.then it wont start again for another hour. does it have an automatic shut down? ple


Well it sounds like you have a relay problem. It can do that. The terminal you speak of probably has nothing to do with starter at all. a flasher or something, so unplug in and see if the signal light stop working. Firstly check to see if ... 2000 Dodge Caravan

Ok, for some odd reason two of my ignition coils dont seem to be getting any power to them, i changed out ever plug with new ones and also new ignition coils, its a 91 TT, im jus as lost trying to explain my situation...but this is as far as i can explain...


Change the crank sensor ... 1991 Nissan 300ZX

NO Start the truck is not getting spark the coil is good but i'm not getting any power to the coil and I need to know if i'm testing it right i'm thinking it is the ignition


THE POWER TO THE IGNITION COIL COMES FROM THE AUTO SHUT DOWN RELAY..THE AUTO SHUT DOWN RELAY IS GROUNDED BY THE POWERTRAIN CONTROLLER WHEN IT SEES CAM AND CRANK SIGNALS..WHEN CRANKING..HOLD YOUR TEST LIGHT ON DG/OR WIRE AT COIL AND HAVE SOMEONE JUST ... 1998 Dodge Dakota

I have volkswagon jetta 1997 2.0L. Car do not start. I checked there's no spark. There's injector pulse, and fuel pump is working, crankshaft sensor is working. The signal from computer to ignition coil is missing. There's week steady ground on it coming from ECM. I changed ignition coil with power transistor and changed ECM and I'm getting the same problem. There's no fault codes in ECM memory. HELP. Sincerely Jerry.


Cam sensor working properly?If it isn't the ECM will not get the info it needs to fire.If it is.... your ECM is likely faulty.Thanks ... Volkswagen Jetta

I have a 1980 ford courier and its getting no spark. So i replaced the ignition module, the distributor, and also the coil. The coil gets power but it wont spark.


... Cars & Trucks

Engine just died while driving. turns over but wont start. replaced ignition coil. same problem, does not seem to be getting power to the coil. checked fuses also made suer it was getting fuel. 


1990 izuzu p/u 2.3 will start and run but will not idle? ... 1990 Isuzu Pickup

Ignition coil not getting power on 1995 dodge ram, it is not getting fire to start. any answers or solutions?? Put a new coil, plugs, wires.


... Cars & Trucks

Hi, I get a P0305 diagnostic code on my 2002 Dodge Grand Caravan with 3.3L flex fuel engine. It has been running just a little rough intermittently for a couple of weeks. Today it started getting worse. Previously I had changed out the ignition coil pack due to arcing from the coil pack to the metal bracket that holds the Power Steering Fluid Reservoir. Any ideas? Thanks!


It is a miss fire on number 5,it could be a bad spark plug,or boot on the coil to spark plug,do a spark plug change out . ... 2002 Dodge Grand Caravan

I need help with my 98 dakota that wont start. It has a 3.9 ltr in it. I have fuel pressure and it turns over but I have no power at the coil or at the injectors. I cant seem to find out where the issue is. If i patch wire to the ignition coil it still wont fire cause I get no ground from the pcm. Mitchell only shows one power wire at the pcm and it has 12volts. I really dont know what else to look at. Does anyone have any ideas.


If yours is similar to my 92 shop manual (I have a 92-5.2 V8)\015\012\015\012The 3.9&5.2 use a ASL-Auto Shutdown Relay,you will find, in my case under the hood on the driver side fender. If the computer, we'll call it,doesn't see the ... 1998 Dodge Dakota

I was driving my car it started jerking then died waited a few minutes then cranked up drove it to my mecanic he changed yhe crank sensor but no spark he went to autozone to get the ignition coil tested it was good i have no spark and no fuel on fuel pump i got a multimeter to trace wires i have power going to the coils but i dont know if i have ground i have power to fuel pump but i dont know if i have good ground some tech said it was my computer so i got a used one from a junk yard but still


... Cars & Trucks

I have a 91 ford mustang 2.3L 4 cyl that started running like **** today. It sounds like it's on 3 cylinders. I checked the spark from the plugs to the ignition coils. Of the 8 only 3 were sparking on the rear coil. I switched the power plugs on the coils and managed to get spark on 2 plugs from each coil. Is this more likely a computer issue than a coil issue? Do I need to replace both coils?


... 1991 Ford Mustang

Im not getting power to my ignition coil


... 1990 Dodge Caravan

! have a(correction): 1995 Grand am. It's not getting power to the fuel pump... The coil, relay, & ignition module are fine. I've just put my 3rd fuel pump & fuel filters on thinking that may


If the fuse and fuel pump relay check out then yes, your friend may be right. Inspect the connections to the pump and check related wiring for damage. ... 1992 Pontiac Grand Am

94 accord lx 2.2 no spark has tech distributor with external coil coil was burnt - replaced it have tried to ohm distributor don't know specs. Voltage tested coil power good but on negative wire at coil have no pulse while cranking once key is released from start to run position I get constant negative signal and coil ignites once?


... Cars & Trucks

I have a no spark condition even after i replaced the ignition coil. then tested the positive side of the coil and connector and found power to the connector and positive side of the coil but when testing the coil output i get ABSOLUTELY NOTHING. this is after replacing the coil twice thinking the first was damged. what else can it be?


You have tested for voltage but is it enough? My experience With this model Is the distributor pin has sheared off and is not turning if the rotor does not spin the coil will not spark, remove the c ... 1991 Honda Accord

1990 Isuzu 2.6 L 5 spd. No start.. Fuel pressure is ok, not getting spark. Checked coil, ignition module, distributor, computer and coil wire. No power coming from the coil. Small voltage going into coil. Why is my truck not starting?


COULD HAVE BAD IGNITION PICK UP COIL IN THE DISTRIBUTOR.CHECK WIRES TO IGNITION COIL AND MODULE FOR DAMAGE OR POOR CONNECTION. ... 1990 Isuzu Spacecab
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.0586 seconds