Having problems with your 1995 Jeep Grand Cherokee ?

Lugnuts are stripped on the drivers side front rim and the tire is completely shredded

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Generally you can use a smaller socket on the lugs, If you have deep set lugs (aluminum wheels) You will need to use a 1/2" extension and socket. Pick one that needs to be hammered on to the nut, then after it's off, use a smaller extension to drive it out (3/8) If I remember correctly after the tin cover on the lug falls off, the socket size is 17mm.
Repair Help & Product Troubleshooting for 1995 Jeep Grand Cherokee

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lugnuts are stripped on the drivers side front rim and the tire is completely shredded

Generally you can use a smaller socket on the lugs, If you have deep set lugs (aluminum wheels) You will need to use a 1/2" extension and socket. Pick one that needs to be hammered on to the nut, then after it's off, use a smaller extension to drive ... 1995 Jeep Grand Cherokee

My 2008 ultima tires will leak air to the extent they are almost completely flat. It started with the passenger side rear almost completely flat. I would fill with air and it will last for 2-5 days. Now the drivers side rear tire is going flat nightly and the passenger side rear is staying inflated. I have also had to add air to both front tires. ALL THIS IS BEING DONE WITH COLD TIRES. THANK YOU

Your tyres need checking for slow punctures or leaking valves. If you want to do it yourself. You'll need a tub or pool big enough for a complete wheel. Fill it with water, then, remove one wheel at a time and put it in the tub/pool. look for bubbles ... 2007 Nissan Altima 3.5 Sedan

I have 01 Dodge Stratus 4 cylinder, when i accelerate my front end has a very loud rumbling/vibrating noise and when you turn the wheel it is squeaking very loud and bad. When i turn my wheel to my drivers side the rumbling noise stops almost completely and the squeaking gets somewhat quieter,but when turnin my wheel to the passenger side it sounds Like my front passenger side tire is about to fall off and the squeaking gets louder when turning the wheel to the passenger side. What could this b

It is probably your wheel bearings. Although, it is possible that your CV Axle could be damaged. ... Cars & Trucks

The vibration is felt in the seat from 55 - 65 mph, when accelerating. I have new tires, just balanced and rims straightened, so no damage. Is it possible to be the front axles? The passenger side has some play, and the driver's side is much less.

Unless you have AWD (all wheel drive), there is no driveshaft to check. But the inner CV (constant velocity) joints do wear out eventually and will give you a vibration under acceleration. If this problem occurs only when you are accelerating, it is ... 2001 Volvo S60

2004 pontiac grand prix gt. humming noise while driving. Louder at 25 mph or higher. Changed front passenger side hub bearings due to when turning slightly left humming quiets. I stol have humming. Replaced driver side front cv joint/axle, humming still there. Checked front driver tire to see if play in tire - no play. Bushing on sway arm or stabilizer bar is bad. Could that make the humming noise? Any comments would be greatly appreciated.

I change both wheel hub bearings when one goesDoesn't matter what stabilizer does--- the bushings needto be done-- so you sayMaybe you replaced the wrong drive axlePut the front tires on the back to see what happens ... Cars & Trucks

My front drivers side rim is getting dirty not my passanger side just the drivers side front rim is there a problem with my break pad or is there a leak in my break line?

... 2001 BMW 325

Shaking in front end drivers side of 97 grand cherokee laredo. Increased speed increase in shake. Feels almost like the tire is falling off Lifting and removing the pressure from the front end the drivers side tire is lose and the passenger side is not.

Lets stop and take breath,get the wheel aleinement checked,is the tyres ok,if all is ok then a steering joint is gone not a big problem go to a tyre guy and i will tell you the problem will be fixed in under the hour.adrian,,,,,,,, ... 1997 Jeep Grand Cherokee

There is a rubbing sound coming from the drivers side tire, and when the gas is pushed hard, a loud thump comes from the drivers side. The explorer is all-wheel drive. Underneath, the entire driver's side suspension is wet from fluid, especially near the front differential. In addition to this, the ball joints in the suspension are worn. There is no liquid on the passenger side front and i felt no problems coming from that side. What could this be?

The thump is from the worn ball joints. You will need to determine the type of fluid by getting some on your finger and smelling it to determine what it is. It could be power steering fluid (reddish brown) could be gear oil (greenish), brake fluid (c ... 1997 Ford Explorer AWD

There is a rattling noise coming from my drivers side front tire, i have checked the lugnuts & everything seems tight?? any ideas would be appreciated.

It could be the front brake pads rattling when driving. they do rattle sometimes. check the pads out!! ... 2001 Chrysler Concorde

I have a 91 ford F-150 with 17in American Racing Alum rims and horrible brakes. I have two problems. 1) Sometimes while driving the brakes when slightly pressed in they [ the brakes ] with apply; but other times I'll have to literally push the brake pedal in ALL the way. Why is this? 2) And number two, I was driving last night and all of a sudden I heard a sound coming from my front drivers side wheel. It sounded like a flat tire. It wasn't. I was thinking it was a bearing problem, hoping it was

Have you ever replaced the brake calipers sounds to me you have stuck caliper piston and maybe stuck caliper bracket pins. Mayb e the caliper has come loose which is very dangerous. ... 1991 Ford F150

Feels like my front drivers side tire is lose but I check all the lugg nuts and they are tight. I can drive straight and I get a loud sqweal(as if I'm taking a corner to sharp) from the passenger side front tire and I just blew the passenger side tire a couple of days go. I seem to fix this problem if I hit a pot hole hard, but for some reason its happening more often here lately.


Feels like my front drivers side tire is lose but I check all the lugg nuts and they are tight. I can drive straight and I get a loud sqweal(as if I'm taking a corner to sharp) from the passenger side front tire and I just blew the passenger side tire a couple of days go. I seem to fix this problem if I hit a pot hole hard but for some reason its happening more often here lately.

Sounds like you have either tie/thrust rod ends going bad, or ball joints. Your wheel bearings could be going bad as well. Any of these can cause this problem. To check the tie/thrust rod ends, turn the vehicle off, and have a friend turn the whee ... Cars & Trucks

I have a 90 Honda Accord with an automatic transmission. It was involved in a minor accident about two weeks ago which broke the headlight lens on the driver side side along with bending the front wheel rim on the same side. There is also a minor crunching of the front driver side fender (same location). Ever since that happened, occasionally when we first start out and attempt to back up from a parked position, there is a loud gear grinding noise. All forward gears work perfectly. What woul

... 1991 Honda Accord

My passenger side front wheel moves side to side about an inch or two when front end is lifted off ground.I noticed it while i was rotating my tires, i just happened to grab the wheel before i took it off. Theres tension on it but i can still move it side to side. It doesnt move top to bottom. Its not the wheel bearing. I keep all my ball joints greased. It looks like there is play where the steering stabilizer bolts on the passenger side. The drivers side front wheel is tight. Is this norm

Replace inner and outer tie rods my 04 Silverado had the same problem ... 2004 Chevrolet Silverado 2500HD

Initially, passenger side control switch to passenger front window stopped working. Now, driver side control switches for both front windows don't work. The driver side window worked sporadically prior to it failing completely with the window in the open position. Checked fuses, and they are good.

... 2006 Volkswagen Jetta

I have a 2005 G6, the front drivers side turn signal lamp is not working. The drivers rear blinks twice as fast. I have replaced the bulb, I switch the bulb and headlight assembly from the driver to the passeneger side and the trouble did not follow. The driver side lamp and headlamp assembly works ok on the passenger side. What should I do next?...I hate to go to a lot of expnese, but I need to do something my wife is getting tired of hand signaling ha ha..Thanks

Fast flashing on the one bulb is a fault is due to the failure of one bulb, hence the holder for the flasher unit not wirking has gone defective the contact may have broke in the flasher unit not working , look in where the bulb goes and compare the ... 2005 Pontiac G6

I have 94 CHEVY SUBUBAN K1500 4wd. I have had it aligned 2 times, new front tires and the outer edge of the passenger front tire keeps wearing uneven. The driver side front tire is fine.Chould this a wheel bearing going bad or should i take it to a different alignment shop. I have also replaced all front ball joints and tie rod ends before the alignments were done.

Check if your shocks are leaking. Jack up the car and with the right wheel off the ground check it for play in the bearing if it is tight and not grinding it is good. I would try another alignment shop if you dont find anything. Oh by the way dont le ... 1994 GMC Suburban

Im junior and I drive a 97 chevy 1500. Two wheel drive. 6cy. 4.3. I need to know what the name of or where I can find the exploited view of my problem. Ok coming from the driver side front tire there's a rod that goes all the way to the passenger side front tire. Well where the steering column is going into that rod. I leak power steering fluid bad. The pump is good but I don't know what gaskets and seals to get or where can u help me thanks

Pitman shaft seal kit is what you need. the large nut is removed then a puller to remove the pitman arm off. \012then the seal can be serviced ... Chevrolet 1500

I think my ball and cv joint on my front passenger side both broke earlier today. The tire was perpendicular to the front drivers side tire.

Yes, that is exactly what happened. Joe ... 1997 Honda Accord

1999 Plymouth Breeze 2.4 L freeway driving at 65-70 mph the cars front tires felt like they were going to buckle inward (towards the back of car, hesitate sorta feeling. Felt it more on the front driver side then the passenger side. When I felt this it only lasted long enough for me to notice it and say something to the passenger. 2 seconds? 4 wheel alignment and two new tires on rear. Car has vibration at all speeds. Thanks you

I'd take it back,& explain & have them re-check what they did, and ask if tires were balanced. ... 1999 Plymouth Breeze

In 2007 I hit a pot hole on the front passenger side and i had to get a new tire and rim. When the dealership looked at my car they told me that I could have possibly tweeked my frame but they were not sure. About 8 months ago I have been having issues with the car shaking and it feels like it is about to fall apart. I have gotton new tires several time due to wear and tear on the front passenger side I have also gotton alignment upon alignment done also. Do you have any suggestions for me?

It sounds like definet frame damage. there is no surefire way of fixing due to it being a uniframe type. the only fix a shop can give you is lifetime alighnment deal and tires =( ... 2005 Hyundai Elantra

I have a creaking noise coming from the front driver side when making turns at low speed. Also, the front driver side tire is wearing off on the inside. Kim

The tie road end + rack end is the main proplem for making your tire wearing off\015\012the noisy at slow speed coming from tire \015\012you can check that by make the tire free by putting the car on the lift then you catch the tire from ... 2001 Chevrolet Impala

I just changed the oil in my '95 Villager and when I went to back down the ramps I had the front tires on, I had issues engaging the wheels. Later, I went to go to the store to get milk in the middle of the night, and it doesn't seem to shift out of park, and while trying all the out, my passenger window won't roll-up. The driver side works fine, and I checked all the fuses in the driver-side panel, and all of the fuses in the (annoying) panel on the driver side, under the hood; nothing was amis

Http://groups.yahoo.com/group/villagerquest/\012\012\012loose shifter screws on sfift tube on steering column. Torx head (2). whre sift cable ... 1995 Mercury Villager

I have a 94 mercury sabel with 70,000 miles on it. The problem is when going down the road it seems to have a vibration at slow speeds. None at high speed. When I jacked up the front end you can move the front tire on the passenger side back and forth a couple of inches of free play. Looks like it is in the rack and pinion steering drivers side is not as bad but also has some play. CV joints seem fine, kinds scary should not have that much play. Zero play up and down, just side to side

Wheel bearings are bad ... 1994 Mercury Sable

I have a 1997 GMC Sierra. My front left(drivers side) tire wears horribly on the outside. (lookin at the tire from the front of the vehicle, the top leans out, and the bottom cuts in. The outside 6inches wears on the tire, while the inside tread does not wear at all.) I was told something about it being the inner tie rod was worn. But from my knowledge, that would not let the tire lean out like that. I was just wondering if anyone knew what the possible cause/repair-cost would be for that issue?

Align the truck, sound like the camber is out of adjustment the upper control arm is holding it out too much, or your lower ball joint is messed up and lets it tuck in. The tie rods on that truck have nothing to do with it. Ball joints are like 40 bu ... GMC K1500
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.2487 seconds