Having problems with your 1995 Ford Crown Victoria ?

DRL staying on killing battery, disconnected DRLs and now no high beams. Cause?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

You need a new DRL module. It is under the hood on the radiator support. Hope this helps
Repair Help & Product Troubleshooting for 1995 Ford Crown Victoria

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

DRL staying on killing battery, disconnected DRLs and now no high beams. Cause?


You need a new DRL module. It is under the hood on the radiator support. Hope this helps ... 1995 Ford Crown Victoria

DRL PROBLEM DRL dosent work, when i start my car DRL dosent work,and also when turn on the light and trying to go to high beam,only left high beam works and right high beam stay off.I checked bulbs are good. What is the problem? ASIM


Check fuses,\015\012check wiring. ... 1994 Honda Accord

02 corolla starting with problem last week , the high beam indicator light keeps blinking and then a clicking noice for about 4 days, Mechanic couldnt find cause. Now the parking lights stay on even when car is turned off and the battery is now dead


The problem on this car is you have a body control module and PCM. Its very common for the fault to be computer related. If you did not go to the dealer all an independant shop can do is inspect the normal stuff. Most do not have the capability to ... 2002 Toyota Corolla

High beam light stays on on dash and kills battery..."no bus" message reads out as well on dash??....


... 1998 Dodge Dakota

1989 HONDA BATTERY LIGHT STAYED "ON" IN THE INSTRUMENT WHILE ENG IS RUNNING. NEW ALTERNATOR INSTALLED AND REPLACE THE OLD BATTERY BUT THE RED BATTERY LIGHT IN THE INSTRUMENT STAYED "ON". TROUBLE SHOOT FOR SHORT AND FOUND NO SHORT AND THE BATTERY IS NOT DRAINING. DISCONNECT THE ALARM AND RUN THE ENG BUT THE RED LIGHT STILL "ON". WHAT CAUSE THIS LIGHT TO COME ON ALL THE TIME. THE ENG IS RUNNING FIND ALTERNATOR OUTPUT IS 14.5 CAR START JUST FIND.


The circuit in the cluster is made with a thin ribbon material that gets hot and fuses with other circuits. If your mechanicly inclined you can remove the cluster and see a burnt spot that will be the shorted area. take a razor blade and scrape ... Honda Accord

I cant get my low beam on..my high beam stay on and when switch to low beam,it still high beam please help cause i work the graveyard shift and im sick of tire of getting pull over for something i cant fix...very grateful sokun boston


Sounds like your switch on the column is broken. It happened to me before. I didn't feel like taking the whole steering column apart so I traced the wires from the headlights and hooked up one of those old floor mount clickers. They still sell new ... 1997 Chevrolet Blazer

The driving lights or high beam headlights stayed on and drained the battery. The car is a 2001 Saturn 4-dr. with 2.0 engine. The car won't start, the battery is down, since the lights stay on. How can I make the lights go off so that the battery won't drain again.


High-beam lights are your sencondary head lights in any veicle. They can usually be turned on with the same botton you use to turn your head lights on. High beam lights are use to see farther and wider in dark areas. Its the problem in t ... Saturn LS

I have a question on my 2004 Impala what would cause the low beam headlights to be out and the high beams to only work in the FTP mode, I keep the the headlights in the ALC mode all the time and only use the headlight switch when it rains, I hear the relay switching when I pull out the switch and the DRL mode is not working also,what is need to fix it? If it's is the headlight relay how do I get to it? This just started Saturday I was able to get them to work by flashing the high beams


The low beam in a headlight is not working but high beam is\015\012working. This is because the lamp bulb\015\012or halogen lamp module has reached the end of its life, not because of any\015\012wiring problems. Low beam b ... 2004 Chevrolet Impala

Low beam nw working when switch on low beam high beam works drl very dim,disconnected drl module same thing


... 2004 Ford E250

I HAVE A 2003 HONDA CIVIC,THE DRL LIGHT AND HIGH BEAM INDICATOR ON DASH ARE ON, LOW AND HIGH BEAMS WORK DRLS ARE IN-OP


... 2003 Honda Civic

I have a 2005 Santa Fe I wired in lights on my bullbar to my high beams. The problem I have is this when the car is running everything works as it should. As soon as I turn off the car the lights stay on. I do not have or want a switch as they are wired to high beams. here is how the relay is wired 30 to + battery 85 to grounded to chasis 87 to + to both new lights 86 to + highbeam on headlamp Any help would be great really don't know what to do? Thanks David


Hook the light's into the low beam's just run a power and a ground and that should fix it ... 2005 Hyundai Santa Fe

I instal hid light on my truck a month ago did not have any problem until yesturday they start flikering and shot off i have 6 ballast for high beam low beam and fog all with ther own relay and they all flikering even my auxiliry driving light go off and they are not ground at the same place could it be the secondary battery post melt insinde the battery cause i put back my halogen ligth and evering thing is working fine don't what to try any idea is welcome


If the HIDs draw too much current, they will cause the light to flash on and off.\015\012\015\012You may need a different headlight switch with a higher current cut off.\015\012\015\012from a ford shop manual:\015\012 ... 2004 Chevrolet Silverado 1500 Crew Cab

My switch to turn my high beams on never worked, so i would have to hold the lever towards me as i drove. last night though, the high beams turned on and now they wont turn off. not even if i turn the car off. is there any way to fix this without disconnecting the battery every time i want to turn the lights off or spending three hundred dollars for the new part?


Well you could just buy a used steering column from a junk yard and get the switch that way instead of buying a new one,but the switch will have to be replaced ... 1999 Buick Regal

Hi, my abs, traction, and brake light have been staying on upon starting my car, I've recently had problems with my brake sensor switch, which causing my brake lights to stay on, and i had to disconnect the battery everytime I stopped my car, so now these other lights are starting to come on, could it be something with my battery? I would really appreciate any information.


Unless you are experiencing any other problems(ie., car stalling or constantly losing all your radio memory, then no it wouldn't have anything to do with the battery.It would not hurt however to re-inspect the battery cable ends and just make sure th ... Buick LeSabre

92 Buick Riviera with Electrical issues started with the lighter fuse melting down. Now that he has replaced the fuse and recharged the battery the headlights stay on and the horn blows continuously, so he has to disconnet the battery. It's as though there is something running and we can't find it that is killing the battery because he disconnected the horn and some how he got the lights off one time so we left it over night and sure enough the battery went dead. And another issue is that nothin


The PCM dosen't control these items, so it isn't the problem. Is sure sounds like it's in the wiring- a short to ground. As you have many different systems involved, you may have rodents chewing the wires, [ bare wire to rear lights is a sign ]. Yo ... 1992 Buick Riviera

High beam stays on draining battery ever when 1996 windstar


You have hot grond ... Ford Explorer Sport

Hi, Have an 88 Olds Cutlass Ciera. High beams come on, but won't stay on more then 10 seconds. Low beamd did work, but now flash on and off. This may or may not be related. Short in tail light , the fuse blows. May be Daytime Running Light (DRL) module. But can not locate DRL module. Where is DRL module located?


MOST VEHICLES HAVE A CIRCUIT BREAKER BUILT IN THE HEADLIGHT SWITCH. OVER TIME THE CIRCUIT BREAKER WILL GET WEAK & IT WILL TURN THE HEADLIGHTS ON & OFF. YOU PROBABLY NEED A NEW SWITCH & THE FUSE BLOWING IN THE TAIL LIGHT CIRCUIT MAY BE A S ... 1988 Oldsmobile Cutlass Ciera

Battery indicator light is on, both while vehicle is on or not running. Was told water pump and high pressure power steering hose were leaking onto terminals, causing indicator light to come on. Had both replaced, but light continues to stay on. Battery is 10 years old. Could it just be telling me to replace the battery? Was told serpentine belt was ok.


YES I WOULD REPLACE IT THE BATTERY LIFE ON THE BEST BATTERY YOU CAN BUY IS 72 MONTHS. ... 2001 Oldsmobile Intrigue

2003 sunfire...I have had the dim headlight issue, as well as no fog lights working...I removed the wiring harness and found some coroded wire....Replaced bad wiring...All the lights work with the exception of the DRLS..... When putting can in gear DRL relay flickers and DRL light goes out. If I turn the lights on first before putting in gear it doesn't flicker at all!! The high beam bulbs are fine.... Any ideas would help


... 2003 Pontiac Sunfire

1998 pontiac sunfire daytime lights work but the low beams don't' I replaced bulbs and checked fuses all ok. Also when I click on high beams they won't stay on. Could it be DRL fuse or is it corroded wire behind washer fluid or the actual switch.


... 1998 Pontiac Sunfire

Headlights do not turn on my 1998 Chevy cavalier. replaced light bulbs and high beams stay on but no low beams? I changed the bulbs on the car back to front, changed the DRL relay, changed the switch on steering wheel and still not working?


Problems like these are more often the front wire harness that runs across the inside of you bumper and plugs in underneath the battery tray. A lot of shorts are found in these harnesses. Glad you got yours fixed. ... 1998 Chevrolet Cavalier

Had battery changed. Neither the running light or low beam work. High beam does work. What could cause this?


Sounds like it is a blown fuse. The high and low beams use a different fuse. Open the driver door all the way, and locate the fuse panel next to the steering wheel on the side of the dashboard. Pop open with a screw driver. The card and chart on the ... 1996 Volkswagen Jetta

2001 X5 BMW ONE DAYTIME/HIGHBEAM LIGHT WENT OUT CAR SAID CHECK HIGH BEAM LIGHTS. WE BOUGHT A NEW LAMP FOR IT AND THEN THEY BOTH WORKED FOR 15 MIN SHUT OFF THE CAR. RESTARTED THE CAR AND THE OTHER DAYTIME RUNNING LIGHT WENT AND THE NEW BULB STOP WORKING AND THE BATTERY LIGHT CAME ON AND SAID TRANS FAIL SAFE MODE. DISCONNECTED BATTERY TO RESET THE COMPUTER BUT NOW AFRAID TO WORK ON HIGHBEAMS/DAYTIME RUNNING LIGHTS FOR FEAR IT WILL GO IN TRANS SAFE MODE AGAIN. ZENON LIGHTS ARE OK AND CAR STILL


... 2001 BMW 5 Series

Stays in first gear at high RPM's Will shift fine when I let off the gas and all other gears shift fine. Trans oil is clean and full. Traction Control off light is on and will only go off when car is in park. Stay off for about 5 minutes after car is put into drive. Cruise control has also stopped working. Everything worked fine a week ago, Checked all fuses and rebooted the ECM by disconnecting the battery. Check engine light on. Code says I need a new oxygen sensor.


... 2000 Pontiac Firebird

My heater blower was working fine the other day, i had to disconnect the battery to replace a high beam bulb and when i reconnected the battery my heat wouldnt work, like the blower wouldnt push any air????


Simple check of the fuses and connections first if all ok disconnect the battery on the postive side for at least 20 sec hook it back up. Hopefuly thats cures it if not hit me back to go further.\012 Best of luck to ya! ... 1997 Chevrolet Blazer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.8936 seconds