Having problems with your 1995 Chevrolet S-10 CA Edition ?

4x4 works in 4 low but not 4 high - 1995 Chevrolet S-10 CA Edition

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 1995 Chevrolet S-10 CA Edition

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

4x4 works in 4 low but not 4 high - 1995 Chevrolet S-10 CA Edition


... 1995 Chevrolet S-10 CA Edition

My 2006 ford f150 4x4 works fine in high and low but the light won't come in the dash for 4x4 high but it works fine for 4x4 low what causes this


The 4x4 high light has been on far longer than the low ratio light, I suspect it has simply worn out and blown, try a new light. \015\012other than that the switch in the transmission could be faulty / have corroded connectors ... 2006 Ford F-150

4x4 works but the 4x4 high light doesnt 99% of the time 4x4 low works and 4x4 low light works 100% of the time bulb is good and sometimes it blinks on for a sec. where is the sensor located thanks


You will need to look under the dash; these will lead to the transfer case at some point; that is where the sensor should be located. If not, follow any wires that may lead to the transfer case, transmission, or the engine compartment around the fram ... Ford F-150

When useing 4x4 high range works but when u want to go to low range u can hear an electric motor but instead of low range coming on everything goes off even high range. If you shut off engine and let everything reset then high range usually works again until u try putting it into low range again.


Likely needs a shift motor on the transfer case. ... Ford F-250

I have a 2001 chevrolet cavalier and the high beam lights do not work but the low beam lights work just fine. we just changed the bulbs out yesterday and the high beams still dont work but the low beams do. we checked all of the fuses and they are all fine. how do i fix the high beam lights?


Sounds like its a problem with the light switch handle. Had it myself as well...\015\012If you're savvy enough around car electronics take out the light switch handle, take it apart, find the problem and fix it. Inside the handle-switch you hav ... 2001 Chevrolet Cavalier

2002 Ford Explorer XLT, 4.6 V8, 163,000 kilometers. The unit apparently engaged 4x4 High while parked overnight. I had not used anything but 4x4 Auto prior to this for months. When I backed out of my drive in the morning, the wheels crow hopped as I turned. The system engages 4x4 low normally and dash lights indicate that 4x4 low and high engage normally when selected. However when 4x4 Auto is selected, the transfer case does not allow slippage. It works normally while driving straight ahea


The transfer case shift motor or gear shift module is not functioning.The shift module located behind the glove box.That module has to be inspected.\015\012---------\015\012During the Auto 4WD mode, the power flow is t ... Ford Explorer

Only 4x4 high won't work 94 jimmy. It works in two wheel and in 4 wheel low just not high. It's a 94 jimmy, vanity wise it's mint. They're asking $1495, 200,000 mi. That seems to be the only problem and I don't need 4x4 high. Should I buy?


Thats a fairly common problem with that model. Typically it involves a 75.00 part called a transfer case actuator. I personally think the price is right if the vehicle is in good condition other than the actuator. Be advised the Jimmy's normally came ... 1994 GMC Jimmy

I have a 2004 crew cab F150 4x4 that is not working. Both lights will come on for 4x4 high or low but wheels will not engaged. When in 4x4 low transmission pulls as if in 4x4 low but front wheels will not engage. Please any suggestions you can offer to a soulution would be great prior to me taking it to the dealer. I am very mechanically incline. Thank you.


I have the same problem with a 2005 Ford crew cab . Thank you. ... 2004 Ford F150

4x4 high will not work light blinks on then goes off quickly 4x4 low light goes on in low and seems to be working


... 2005 Ford F-150

I have a 92 4.3 gmc 4x4 short box when i put truck in 4x4 hi it stays in 2wd the shifter is on the floor i can move the shifter to high low but will not go in gear for the high or low it work erlyer today can anyone help or point me in a spot where i can do somthing i looked at the link under the truck and it moves just dont know what to do


You might want to peek at the throw out/ throw in solenoid that locks the front axles into 4x4. Thank you, Dana ... 2000 GMC New Sierra 1500

I have a 2000 ford ranger xlt 4x4 w/ 4.0 engine.when i try to engage the 4 wheel drive the 4 wheel low and 4 wheel high light blinks back and forth for a couple of seconds.also it sounds like some kind of clicking noise coming from the switch.but it wont go into low or high. thanks for any help you can give. Thus problem started all at once before that 4x4 worked fine. Anything would be helpful Thanks- Kevin-


You pretty much answered yourself here, the switch sounds like it is going bad. ... 2000 Ford Ranger SuperCab

I have a 96 nissan pathfinder 4x4. I was driving and I had to use 4x4 high so I parked my truck and shifted to neutral. I moved the stick to 4x4 high and I whould have trouble driving so I moved stick to 4x4 low, I parked truck and shifted to neutral ofcourse. But now I want to move the stick back to 2 wheel drive and is stuck! I've tryed so many things already, putting the tran on neutral is one of the tries and it still won't work.... what could be wrong???


... Cars & Trucks

2002 chevrolet 1500 pickup. while tilting the steering wheel i noticed that the low beam headlights were going on and off. they finally stopped working. i have already replaced 2 relays and the problem is still there. high beams work fine . and the dash sensor is also working. the dash lights up when it gets dark or cloudy. i also checked the bulbs. the low beams just stopped working. at night the truck has to be driven with the bright lights on.


Sounds like the plastic tab that your High/low beam lever (on the steering column) switches has slipped out or broken and was displaced by the column movement. The lever assembly will have to be pulled, inspected, and (probably) replaced. \01 ... 2002 GMC Envoy

My 4x4 doesnt work, i i hear ir grinding when i put it 4x4 low but the front wheels wont drive it will also go inti 4x4 high just that when i drive the 4x4 wont work


Sounds like the transfer case is in need of rebuilding! or the front drive axels have grounded off teeth in the front diff, but I suspect the first one. ... 1992 Chevrolet K1500

Went for a 4x4 trip and the 4x4 stopped working, the light went off the dash and the car would only function in 2w drive. It does not go in to 4x4 high or low at times and when it eventually does go in to 4low it does not stay in 4low and the light goes off the dash and stops working. Please Help!!!


Year make and model ?? ... Cars & Trucks

I have a 2000 chevy Tahoe and the 4x4 isn't working properly the switch on the dash says everything goes into four high and four low properly( the lights don't blink they turn solid) but in four high you don't hear anything engage( in four low you can at least hear the transfer case gears change) My back tires just spin and I've even been stuck on flat mud with just my backs spinning in four low. I just replaced the front dif actuator but it didn't do a thing everything is just the same do


... 2000 Chevrolet Tahoe

96 ram 2500 4x4 V-10 M/T Low beam great - high beam very poor worse than low - high beam indicator stayts on all the time when head lights (only) turned on. Park lights, directionals, brake & reverse all work as advertised w/ no highbeam indication light. Seen many other web sites w/ similar problems in same vech. what gives? Bought vech used inspected wiring harness & found no evidence of tampering or modification (poking, prodding etc) The lights switch when selected & high beam indicato


The indicator on the dash is connected directly to the high beams bulbs wiring so your problem is in the relay, it's burned out and it sticks in a partially closed position. This explains also why the high beams are dimmer than the low ones - the con ... Dodge Ram 2500

I have a 1998 Chevrolet K2500 that the headlights are not working correctly on. When I turn the headlights on nothing comes on unless I turn on the high beams, only the high beams are on, no low beams. If I turn the switch to the "parking" lights position then the low beams come on. I have tried replacing the headlight switch but it does the same thing. There are no blown fuses. Any ideas?


... 1998 Chevrolet K2500

I have a 1999 ford ranger 4x4 the high beams work but low side dont. i have replaced both bulbs and still dont work on low side. im looking for the relay switch to see if it might be the problem if it isnt it then i will look at dimmer switch thanks


... Cars & Trucks

Car idles high then low and dies,it will restart and sometimes run ok,today the speedodomoter went to 0 while driving then started working ,then the low fuel light came on and I had a half tank of gas,shut off and restarted and fuel gauge worked ok ,someone told me it may be the computer going bad ,I had the car checked at a repair shop and they couldn't find the problem


... 1990 Pontiac Bonneville

1500 chevy 2003 4x4 wheel low works but 4x4 high light wont come on or works


The ported vacuum switch is bad it seems or clogged up. Check the vacuum lines for leaks first. The switch is mounted on the axle ... 2003 Chevrolet Silverado 1500

I just bought a 98 Dodge Ram 1500 4X4. It is making a howling/growling sound when it's in 4 wheel drive. High or low range. I haven't driven it very much yet and never noticed it till today. The 4X4 light on the dash wasn't working, found a broken wire, fixed it and now the light works but it started making this noise. Any ideas?


U ever try the vacum line or the vacum chamber i have a 98 dodge ram with the same problem with the 4x4 and i had to replace the vacum chamber and vacum line ... 1998 Dodge Ram 1500 4WD

1989 Chevrolet S-10 4X4 Blazer with 4.3L V6. Solved my problem with 4 wheel drive not engaging. Replaced vacuum swith on transfer case and electric vacuum switch on front axle and now 4 High and 4 Low will engage again. My problem now is this! My 2 Wheel drive and 4 High light will come on the floor panel but my Neutral and 4 Low light will not come on even though it engages just fine. I have taken the panel loose and checked the two panel connectors and checked all 6 bulbs and they look fine. W


... 1989 Chevrolet S-10 Blazer

2003 dodge ram 3500 4x4. low beam RF works no LF; high beam RF out, LF works. turn signals onlr RR works no LF,RR,RF. quickflash on dashboard


First thing to do, go with the replacement of the light bulbs, high beam and low beam are two different fillaments on the ligh bulb, as for the rear also replace the bulbs, when your flasher rellay flashes faster, it means that there is less drop of ... Dodge Ram 3500

1992 ford full size bronco xlt push button 4x4 auto locking hubs. I do not think 4x4 is working. yellow 4x4 high will come on will not go in low.


Junk the autolocking hubs for a set of good quality manual locking hubs. Your local auto parts store should have them in stock. E-Bay is a low-cost option but all premium hubs come with a warranty regarding failures and saving a couple bucks online ... 1991 Ford Bronco
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.1130 seconds