Having problems with your 1994 Toyota Camry ?

Changing a headlight

\015 How to change headlight drivers side in toyota camry 1993-4\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

As with most auto headlights, you will access them from within the engine compartment.

There will be a wiring harness that plugs into the back of the lamp. Be careful not to damage the locking clip that holds the wire firmly onto the lamp. Move the harness out of the way and grasp the connector portion of the lamp and twist COUNTERCLOCKWISE to release the lamp from the housing, and plug the bad lamp out.

When installing the new lamp, be sure NOT to touch the glass lamp as the oils from your skin can damage the bulb by creating a 'HOT SPOT'. As a rule of thumb and good auto maintenance you should ALWAYS replace both lamps at the same time. Headlamp bulbs deteriorate over time and will get dimmer as they age. Why get dirty twice when you can do it just one time. Besides most lamps are sold in MATCHED pairs so the intensity will be the same for both the left and right sides of the car.

Hope this answers your question.


Repair Help & Product Troubleshooting for 1994 Toyota Camry

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Headlights don,t work. Checked the fuses in motor compartment, nothing broken even changed them. Checked the fuses left of driver seat, nothing broken even changed them. By pulling handle left from stearingwheel it gives me big headlights, if I let go they don,t stay that way, not even if I turn the switch left from stearingwheel. Wich it did befor. Conclusion It has power from the battery but headlights not burn. Ofcourse I changed them to begin with. Please any advise. Thanks; Eric

You can look at this website it may or may not help, Tim:http://electricwiringdiagram.com/search/2001+volvo+S40 ... 2001 Volvo S40

Headlight bulb I have a 2008 2500 hd sierra slt Duramax I was looking how to change headlight bulbs.Booklet says to change remove air cleaner and reach in and change them from the back. That won't work no room to even see the back of headlight. Looks like there is 2 bolts holding the assembly in and it should swing out like a 2001 gmc with there pins. the assemblys come out just dont know where to push thanks

You have to remove the air intake filter and then kind of reach around up in there to change it. It can be done, but is a lot of work. On the duramax, it is even harder to do the driver side because of the dual batteries. You have to remove the batte ... 2008 GMC Sierra 2500HD 2WD

Change headlight Hi, I need to change my headlight, and I would like to do it myself. It looks easy enough, but so far no luck. Do I have to remove the entire front light set-up to exchange the low beam only? At that point I might as well change the lens that got run into by an unknown "friend". (I have a feeling that the water that got into it might have contributed to the failing headlight...). I would really appreciate your help. I can't afford another mechanic hour! Thanks, Julie

Julie.... fairly easy to do. the bulbs are changed from inside the engine compartment. you should be able to see the connector going into the back of the bazel (headlight). generally the connect has a ring on it that you have to turn or you may ha ... Subaru GL

Headlight change Two questions: 1. I bought my 2004 KIA Optima used & have no idea if the timing chain has been changed. Mileage is 74,000 mi. Should I change it just in case? 2. How do you change the headlight?

He is right you do have a belt that works the timing chain that is located in the block attached to the cam. but all cars have timing chains in the block so you may want to look into that with the dealership or ask around if it would be a good idea t ... 2004 Kia Optima

I changed the whole exhaust system-including 02 sensors,now my kia will sometimes buck and stall,when it stalls it wont start,just crank.i changed the cam & crank sensors,ecm,fuel filter,coils,spark plugs and wires. i also went through wireing and cleaned connectors and grounds. also now (sense changing exhaust)if i run all electical thing-headlights,ac,radio,wipers,etc...,my headlights dim,wipers move slow and radio goes off. im at a loss,this shouldnt have happened by changing exhaust. please

It sounds like you covered many of things..\015\012\015\012The engine's main ground..\015\012There is a open metal braided wire that runs from the engine to the chassy/frame.. They can fail and still look ok,, and need ... 1999 Kia Sportage

I want to change my headlight assembly on my 2000 Volvo S40. I have a replacement assembly in hand and all I see are 4 bolts. The mechanic wants to charge $130.00 in labor for each headlight. Is changing the headlight really that labor intensive? The mechanic told me it would be 1.5 hours per headlight, is this correct? Can I find directions online?

... 2000 Volvo S40

Removal of headlight assembly to change headlight bulb on 2007 gmc yukon xl. I see the two screws above but can't tell if there is more to removing assembly. seemed easy initialy, but can't figure it out. It looks impossible to change bulb without removing the headlight housing. Thanks

... 2007 GMC Yukon

Jeep88 Turn on park lights and only the Front left comes on. The rear park lights never came on.when you turn the park lights on the right front turn signal also goes on. Changed headlight switch, nothing changed. Fuses are good and stay good. The brake lights work but when you put the brake on, the front right turn signal goes on. After I changed the headlight switch now the turn signals don't work. HELP???!!!

Try making sure all the grounds are good ... 1988 Jeep Comanche

Changing headlights We have a 95 jeep grand cherokee and we bought new headlights changed them out everything was fine they work, but we can not get the new lights to clamp on the clips. What can I do? Can I change the clips to a different size? They have a little ball on the ends that seem to be to big to clip into the new lights.

Suggest changing the clip fastener, or failing that, find some adaptation.Review this information: ZJ-Secc-8L-Lamps (Page 5 and next) ... 2000 Jeep Grand Cherokee

I cannot seem to locate how to get into the area for changing the bulb. I see 4 clips on the headlight am I supposed to unclip the headlight and pull the entire headlight assembly out to change the bulb/

Typically the entire assembly unscrews with 3 or 4 bolts (non adjustment bolts), then the whole thing somes out and you can get at the bulb. ... GMC Envoy XL

I have a 97 chevy express 2500 cargo van with single square headlights,,want to change to a 2000 grill and headlights,,do i need to change core supports also or will just grill and headlights work

... 1997 Chevrolet Express

Hi I have a mazda mx5 mk3 from the UK and I am looking to change my headlights in order for me to register my car in France. I need to change the full headlight assembly and was wondering if you could give me a guide on how to do it as I am under the impression that I will need to take of the bumper to get to the screws for the headlight units. Thanks

To get to the headlight assembly on a MX-5 mk3 or mk3.5 or NC. You do need to remove the front bumper.... To do this there is ten 8mm bolts underneath the bumper that also holds a plastic cover underneath the engine . There's two 10mm bolts hiddden b ... Mazda MX-5 Miata

Changing headlight how do I change headlight on 1998 chevy tahoe?

How do i take out the head light on a 1989 chevy caprice ... 1989 Chevrolet Caprice

How do I change the headlight in my 05 Jag xj8 vdp I need to change the headlight bulbs, I have bulbs, but not sure how to do it.

... 2005 Jaguar Vanden Plas

How do I change headlight bulb . Left side low beam headlight bulb is blowed . I have the new bulb and just need to know where the lever or turn object is to remove from the back side so I can change the bulb out .

Reach beind the headlight and just unscrew the cap that holds it in. However don't touch the new bulb with your bare fingers or you will drastically shorten the life of the bulb. ... 2003 Chevrolet TrailBlazer

Change headlight how do you go about changeing a burnt out headlight

The headlights are like the brakelights you have to turn the socket out of the headlight assembley. be careful not to tough the light bulb with your bare hand. The oils on your skin will make the light burn out faster. ... 2002 Pontiac Sunfire

Headlight change How do I change headlight bulb on 1999 QX4?

Please don't forget to rate:\015\012\015\012Headlight\015\012Removal & Installation\015\012Bulb Replacement\015\012\015\012 ... 2004 Infiniti QX4

Headlight switch I am trying to help a neighbor change a headlight switch on her 1994 olds ciera. How do I change this? Does it come out from the front, the back ?? Thank you

... 1994 Oldsmobile Cutlass Ciera

Headlight replacement How do i change the low beam headlights?? The high beams are easy to get to but the low beams are tucked under the fenders and there's no space to change the bulbs.

Check with auto zone or auto advantage \015\012if they are the good boy they might help do it ... 1997 Oldsmobile Aurora

How to change the headlight on a honda civic si, need to change the light bulb, but can not get the headlight off.

There is just enough room to change the head light bulb, on the battery side.around 1minute - 5minute job.the rest is correct. ... 1998 Honda Civic

Change headlight how to change headlight

Hello. below is the procedure for removal of the headlamp for bulb replacement. to access the headlamp you will need to remove the bumper fascia.\015\012http://gsi.xw.gm.com/image_en_us/gif/000/001/725/1725371.gif\015\012Callout\015\012\015\012Compon ... 2003 Cadillac CTS

Headlight change I need help changing the headlight in my 98 ford escort lx

Bulb should come out of back of headlamp housing. May need to remove battery if bad bulb is on that side. ... 1998 Ford Escort

Hi, I have a 99 mercury cougar and I need to change the headlights. I am having difficulty finding the electrical connector so that I can pull the headlight assembly out and change the lights. Where is this located and do I have to remove anything else after the connector has been disconnected? Thanks

Headlamp Bulb \015\012\015\012Removal \015\012\015\012Remove the headlamp assembly. For additional information, refer to Headlamp Assembly . \015\012\015\012Headlamp Assembly \015\012\015\012Remova ... 1999 Mercury Cougar

Headlight change how do you change the headlight on my ascender? I can't find the manual right now, but I don't want to be pulled over for it not working.

It is actually quite easy and it will not require tools, but you have to remove the entire headlight assembly.\015\012\015\012Open the hood and as you look at the top of the headlight assembley you should notice two tabs, you will need to ... 2005 Isuzu Ascender

Headlight change these are strange,how do you change the headlight bulb on a 2004 dodge dakota?

There are 3 machine bolts that hold the big white part of the head light to the truck. These bolts are black and I think 7/16 but not completely sure, maybe 12mm or so. You'll need sockets, ratchet and a really long extension. Two regular exten ... 2004 Dodge Dakota
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2548 seconds