Having problems with your 1994 Pontiac Bonneville ?

1996 pontiac firebird high beam low beam light switch

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 1994 Pontiac Bonneville

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

1996 pontiac firebird high beam low beam light switch


... 1994 Pontiac Bonneville

I have a 2007 pontiac grand prix and the low beams do not turn on. all other lights work, ie high beams tail lights ext. all fuses good and headlight switch. i pulled the fuse under the hood for the rf high beam and it killed the car. does anyone know how to fix it?


Good Evening, I have an odd question because I have seen this once before........ Have you checked the low beams themselves, like take out the bulb and look at the filament? The other thing would be to check for power to the plug in when you unplug t ... Pontiac Grand Prix

GMC truck light issue: My high beam / low beam switch is built into my blinker. To replace it costs hundreds. Currently, my lights are stuck on high beam. I would like to put them on low beam permanently and install a flip switch to turn on high beams just for state inspection. I rarely use high beam in the city. Is there an electrical schematic I can get to guide me through what wires to connect to the flip switch? Any advice is appreciated.


Well as a tech i dont recomend it but all you got to do is swap the wires on the headlamps at the bulb you will see 3 wires one is a ground the other feeds low beam the other high beam . take a test light and find the one thats hot and cut it and con ... GMC Sierra 1500

Low beam lights not working. high beam okay.. the low beam light are on when the normal driving lights burn. When driving with the light switch is off (safety lights) but low beam lights are not on when light switch is turned on.


Either a relay in the hood, or the light switch is bad.\015\012Good luck. ... 1999 Chevrolet Suburban

Low beams My low beams are not working, I checked all fuses and they are good, replaced headlights, still no low beams. The retractable lights don't even open when I turn on the lights, they only open if I switch to High. But when i switch on low beams, dash lights do go on. All other components in wiring diagram work except low beams.


Hello i no you said you checked your fuse box go under your hood drivers side near your strut tower their problay is a second fuse box its black some times fuses is on the cover you have to unlock the side of cover lift off on inside of cover will l ... 1989 Honda Accord 4 Door

I have a 2003 Pontiac Sunfire that I have been working on for a while, the low beams and high beams all work fine, now that I have rewired much of the front wiring harness, but the daytime running lights dont work and didnt work before I started. The issue has to be somewhere else then the front wiring harness. Any ideas? I hear there is not DRL module in the car, I am going to look at switching the headlight steering column switch but if that doesnt work I am out of ideas.


... 2003 Pontiac Sunfire

96 ram 2500 4x4 V-10 M/T Low beam great - high beam very poor worse than low - high beam indicator stayts on all the time when head lights (only) turned on. Park lights, directionals, brake & reverse all work as advertised w/ no highbeam indication light. Seen many other web sites w/ similar problems in same vech. what gives? Bought vech used inspected wiring harness & found no evidence of tampering or modification (poking, prodding etc) The lights switch when selected & high beam indicato


The indicator on the dash is connected directly to the high beams bulbs wiring so your problem is in the relay, it's burned out and it sticks in a partially closed position. This explains also why the high beams are dimmer than the low ones - the con ... Dodge Ram 2500

One highbeam light was very dull like a semi broken wire, so i rewired the bad side to the good side it worked for a couple of flashes to test , high low beam , then no high beam lights at all, are they hooked through a seperate fuse, some kind of module, or something different, low beam works great with the switch but they do not comeon as driving lights any more since the high beams stopped working, their is also a blue light in the middle of my gages, on now, never seen it before, are not the


You have a wiring problem, look up cavalier headlight wiring on the internet, there is a harness connector under the battery that sometimes goes bad, or the wires are broken inside the insulation, usually in the front harness, the head lights hi and ... 1998 Pontiac Sunfire

NO LOW BEAMS.2000 gmc Jimmy 4.3ltr 4x4 low beams won't come on. They will not turn with the auto-on nore if i turn the switch to on. i have pulled and checked the fuses and relay all are good. The high beams anf fog lights work fine. I pulled the fuse for the fog light and turned on there(fog lites) switch and i got low beams but very dim. Is this the headlight switch or a ground ??? please help. Thank You.


... 2000 GMC Jimmy

I have a 97 Chrysler intrepid with head light issues. I had no low beams or high beams on but day running lights. Then my day running lights quit too. SO i replaced the headlamp bulbs and the headlamp switch and the high beam switch. Still no lights. I then discovered that there was no power to the light fuses under the dash but I did have power in the main circuit under the hood. I then discovered that the DRL fuse was blown. When I replaced this fuse my Highbeam came on but would not go off. E


You might have a shorted headlight relay or a shorted wire for the headlights. ... 1997 Dodge Intrepid

00 Jetta 2.0 Car has daytime running lights but when switch is turned to on position car has no low or high beams. I can pull the turn signal lever and high beams come on but go off when released. I checked the voltage going to the headlight switch and it has power and the test light lights up with the switch is flipped. I was wondering if it is possibly a bad switch, dimmer switch, or relay


Check the headlight relay. ... 2000 Volkswagen Jetta TDI

Repair a stuck DRL relay on a 1997 Pontiac Sunfire? At least I think it's stuck. The DRL don't work but if I turn my lights on the low beams work and when I switch to high beams the passenger side doesn't work. We've tryed changing the relay but still have the problem?


Passenger side high beam element burned out. DRL problem might be the emergency brake suppose to turn off when engaged. Slightly depressed will cause DRL not to work. ... 1997 Pontiac Sunfire

2004 Pontiac Vibe: Both low beam headlights stopped working simultaneously. High beams and running lights continue to work. Fuses look good and one of the lamps is six months new. Would this be a problem with the switching mechanism?


... 2004 Pontiac Vibe

1998 pontiac sunfire daytime lights work but the low beams don't' I replaced bulbs and checked fuses all ok. Also when I click on high beams they won't stay on. Could it be DRL fuse or is it corroded wire behind washer fluid or the actual switch.


... 1998 Pontiac Sunfire

I have a 2005 montana i installed hid headlight kit both low beam and high beam work but when i switch from high beam to low beam the high beam stay on but when i turn the lights off they go back to low beam i have checked all the wiring and power and ground both are good any suggestions


Yours is the fifth problem with the hid headlight kit,have no idea,it may be their problem since people are having trouble. ... 2005 Pontiac Montana

IS THERE A HEADLIGHT RELAY FOR HIGH/LOW BEAMS, OR IS THAT THROUGH THE MULTIFUNCTION SWITCH IN THE TURN SIGNALS ON THE STEERING COL. HAVE AN ALTERNATING PROBLEM. I HAVE HIGH BEAM ON FRNT. RIGHT,NO LOW BEAM AND LOW BEAM ON THE FRNT. LEFT WITH NO HIGH BEAM. CHECKED MY LAMPS-GOOD, GROUND-GOOD BUT ALSO HAVE A WESTERN PLOW SET-UP WITH LIGHTS, SAME THING HAPPENS WITH THE PLOW LIGHTS PLUGGED IN. IS IT POSSIBLE THE MODULE WESTERN PUT IN THERE IS BAD. AND IS THERE AN IN-BETWEEN MODULE FOR THE PLOW SET-UP?


Headlights in my '03 Jeep Cherokee are through a relay, both both light's are on the same relay I believe.I would be suspect of any added modules which drive the headlights. Hopefully, they didn't "splice" in, but used one with factory co ... 2004 Dodge Ram 2500

Haed lights low beam works switch to high beam spot lights work power at all 4 lights but no high beam. high beam indicator light on dash works


All 4 lights is HIGH beam. The 2 that come on in 'LOW' are the low beams. ... 1990 Toyota Land Cruiser

When light switch is on low beam the driver side headlight is on high beam when switch is on high beam driver side headlight is on low beam on my 2006 ford focus im lost


... Cars & Trucks

I am hooking up plow lights for a 2001 dodge ram 2500. The instructions say to splice into the high beam and low beam wires going into the headlight/dimmer switch. What color wires on that switch go to the high beams and low beams?


On back of lights look at color wires the ones coming from high beams and the low beams theres your color wires there ... 2001 Dodge Ram 2500 Truck

Headlights Dodge grand caravan one headlight works with low beam then I switch the high beam then the low beam light goes off then the other light comes on with the high beam


Disconnect the module that is mounted in front of the fuse box .Then carefully clean the the connectors ,they are usually pretty dirty.After they are clean put it back 2gether.If it doesnt solve the prob then u might have to stick some washers on you ... 2001 Dodge Grand Caravan

I have a 1998 Chevrolet K2500 that the headlights are not working correctly on. When I turn the headlights on nothing comes on unless I turn on the high beams, only the high beams are on, no low beams. If I turn the switch to the "parking" lights position then the low beams come on. I have tried replacing the headlight switch but it does the same thing. There are no blown fuses. Any ideas?


... 1998 Chevrolet K2500

1998 cadillac deville high beam head lights only work when you hold the switch in position i hit the high beam switch and the high beams come on, but as soon as I let go of the switch the headlights go back to low beam.


Classic switch problem. Replace your switch and this will fix your problem. ... 1998 Cadillac DeVille

No dash lights. Turn lights on and fuel guage and temp gauge go all the way past full and high. Both turn signal indicators come on. High beam indicator comes on when lights are on low beam. Turn light switch all the way to the right and gauges go back to normal and turn indicators and high beam indicator go off.


... 1993 Plymouth Acclaim

96 Volvo 850 Turbo. Both headlights went out but the high beams work if I hold the switch back. Turn lights and running lights still work. Tested power to the fuse box and no power to high or low beams..checked power to the relay switch and it appears there is power getting to the light relay..any ideas?


Hi, the problem you are having is with the switch itself, this is a common problem so the switch is not expensive to buy.once you replace the switch the lights will work as normal.if it was just one light not working then you ... 1996 Volvo 850

I am having a headlight problem. None of the headlights were working. I replaced the switch, now on high the lower lights are bright and the top lights are dim. When on low the top ones are bright with the lower ones dim. On low beam shouldn't the high beams be off. And on high all 4 lamps should be bright?


CHECK FOR POOR GROUND.WHEN LIGHTS DIM YOU HAVE POOR GROUND OR HIGH RESISTANCE IN HEAD LIGHT CIRCUIT.I SEEN A BAD DIMMER CAUSE PROBLEMS. ... 1984 GMC Suburban
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.5506 seconds