Having problems with your 1994 Jeep Grand Cherokee ?

I had a recall procedure done on the shift detent, they added a spring. Ever since they added the spring I have been without second gear. Also my push button O/D has malfunctioned. Could the spring they added be the root of my problems?

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 1994 Jeep Grand Cherokee

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I had a recall procedure done on the shift detent, they added a spring. Ever since they added the spring I have been without second gear. Also my push button O/D has malfunctioned. Could the spring they added be the root of my problems? The vehicle in question is a Jeep Grand Cherokee Laredo. I have changed the trans fluid, filter, added Lucas supplements for trans repair and many other unsuccessful remedies. Also note there were no metal shavings stuck to magnet in trans pan. I have ruled almos

... 1994 Jeep Grand Cherokee

I had a recall procedure done on the shift detent, they added a spring. Ever since they added the spring I have been without second gear. Also my push button O/D has malfunctioned. Could the spring they added be the root of my problems?

... 1994 Jeep Grand Cherokee

My 2006 Chevy cobalt key will not turn completely to off (cant get key out of ignition) unless I push a small tab under steering column. Also, gear shift does not lock. Can move gear shift out of park to any position with one finger, and without pressing lock button. Is the key/shift problem 1 common problem or 2 seperate problems?

Ur gear shift has a little plastic bar on gear shift and it has crack on the side u cant see have it changed out and both of ur problems will be solved at same time. ... 2008 Chevrolet Cobalt

Shifter problem My 1989 4x4 Toyota pickup's shifter button will not press down without excessive force (two thumbs pushing as hard as possible). It happened all of a sudden. Before I started loosening screws to remove the shifter top, I wanted to know what I was taking off, or if there was something else I needed to do. The shifter is loose and has some play (can move back and forth when in gear) but I have never had a problem with it being it the wrong gear. It also started stalling when I put

There is a small plastik part down at the end of the shift stick, you might wanna see if that is worn out. The fuel filter should be on the left side (if you're standing in front of the truck, looking at it) near the windshield. ... 1989 Toyota Pickup SR5

I have a 1997 Lincoln Mark VIII. The button that you have to push in on the gear shift lever is frozen and we can't get it out of park. Need ideas on what causes this. Hate to take it into a dealer and pay big bucks if it is something simple that we can fix ourselves. Also the one time that we were able to engage the gear shift into reverse it did not release the auto emergency brake release. Another problem we have is the automatic seat adjustment motor runs but the seat no longer mover forward

Make sure brake lights work, if they dont the switch may be bad, not allowing you to pull out of park. check fuses also. if the seat motor runs, check if the cable has come loose. ... 1996 Lincoln Mark VIII

My 2006 Chevy Impala LTZ is stuck in park. Checked the brake lights, they do come on. Took the console apart and pushed in the spring loaded button on the right side with a screw driver to get it in gear. What is causing it to lock in park? What is the solution to fixing this problem?

Probably the shift solinoid is burnt or no power to activate it you should check all fuses this doent run off the brake lights it is a solioid that when activated by pressing the brake pedal releases the lock on the shifter just take a test light gro ... 2004 Chevrolet Impala

I have a 1994 mercury grand marquis. The car runs good but it will not shift into 3rd gear or OD. Also I apparently I blew I believe my ECU chip I think its called, the chip that is related to starting the car and the spedometer and odometer. I have set up push button start so I can start my car. The problem just started recently or its possible I just realized it. My question is is this related to the chip that was blown, or is the mechanical with the transmission?

... Cars & Trucks

Im having problem with my 02 Santa Fe's shifter lock. It will not lock it on park while the car is shut off. I can shift it while its shut off without pushing the shifter lock button. Also, I can shift the gear without pressing the brakes while its running. Any ideas would be great. Please help.

Magnetic locks is the most basic equipment, in use when doing work. 5 if you aspire to become a technician in the field, so it is very important, and find out how it works, what it does, and you can bring many benefits can enjoy the use of it. ... 2002 Hyundai Santa Fe

Hey, i have a problem with my 01 subaru legacy b4 . the check engine light comes on when the cars in idle but push on the throttle and the light turns off ,also when driving say in 4th gear the engine light comes on and power seams to decrease chop down gear and th light turns off and power also returns ...what could the problem be

Possibly it is the bad MAF sensor and a clogged EGR valve. Better get the codes read to have an exact idea. ... Cars & Trucks

Same problem as k6kcy9 Radio & Dome light out..The same thing just happened to my 2000 RL only the seat memory buttons on the door also now does not work, the controls on the seat work but not the 2 memory buttons. I checked the radio & Bose fuses both good. Is there some other mutual connection for these? Problem started when I pushed in cig lighter which still works. Not that is is related, but about 1 year ago the steering wheel adjuster on the column also quit working.

I WOULD START LOOKING AT THE RELAYS,SOUNDS TO ME YOU HAVE A BREAK SOMEWHERE.\012\012\012\012\012\012\012\012\012\012\012TIM ... 2000 Acura 3.5RL

Electronic tranfer case switches are not working, what could be the problem? The vehicle is in 2 wheel hi now and when I push the 4 hi button nothing happens...when I start the vehicle, all three switches (2 hi, 4 hi, and 4lo) come on and then only the 2hi stays lit. again nothing happens when I push th 4hi or 4lo buttons...4hi was working yesterday and I switched to 4lo...4lo came on and I tried putting the transmission(automatic) in gear and nothing happened, so I pushed the 4hi button, heard

Check the trasfercase shift control module and wiring \015\012it's located on the passenger side \015\012remove the carpet thresh hold \015\012remove the kick pannel they are held on by clips\015\012the module is behind the ki ... 1997 Chevrolet S-10 Pickup

Problem w/my 2000 S-10 V-6 4wd, auto trans -only 80,000 miles- part time 4wd used very little.Transfer Case is "New Process #NP 233 " Sometimes my truck sounds like it is trying to go into 4wd when no button has been pushed -usually when it has been stopped for a while - 2wd-Hi light is lit but gears sound like they are trying to mesh ,- pushing any of the buttons 2wd high, 4wd high, or 4wd low stops the noise or simply pushing the 2wd high button works. I've had it on a lift & can see no ob

Hi, you hit the nail on the head with the transfer case control module. Before touching anything - take down the VIN# and Call the dealer - ask about RECALLS. and - SERVICE BULLETINS. This alone will most likely save you money over the course o ... Chevrolet S 10

My toyota camry 1998 its five speed.But when i change gear there is no power to push the car going. Gear one is flat to gear five. smoke come from the left side of the engine block. I added oil but the smoke is gone but the gear problem still there. the star but no power when you put gears and push gas. The car move very slow. What is wrong with my car?

Hi the problem you are having is going to be with the clutch plate you will find that it has worn down to the metal pins and has no actual clutch plate left.\015\012\015\012What is happening is that when you put the car in gear and let th ... 1998 Toyota Camry

Shifting Gears Sometimes when I turn on my car and try to shift out of Park, it will not let me shift, at all. The shift button is locked. I relieve this problem, but using the "Shift Release" area - but I have another shift problem. I also am having the problem with the shifting and the gear lights not illuminating. I will try to shift from park to reverse, it totally skips reverse, clunks into neutral. I have noticed if i turn car off, then on again, it relieves the problem, but this may only

... 2011 Hyundai Sonata

Hyundai coupe o3 sunroof problems when i push the tilt up button it trys to open but doesnt unless i put my hamd on the glass to help it up ,,also when i press the slide out button nothing happens ,,is it a fuse problem,,swich or relay or moter problem

... Hyundai Sonata Hybrid

I have a 51 plate renault laguna and when i press the start button nothing is happening i put the keycard in all lights come on as normal then nothing happens when start button pushed only way of starting car is by pushing car and releasing clutch like a jump start. my reversing lights are fully working as i was told if they werent it could be the gear switch however this problem is intermittent sometimes the button works but more often than not now it doesnt sometimes it works by slamming the g

... Renault Le Car

04 e250. small 8cyl. Tranny bangs in and out of gear 35-45mph if i push the gas it changes gear. Also when i stop the Tranny down shifts a second later after i stop. Also when i take off some times i bangs into gear. When its cold seems to work fine. But having transmission problems when its hot. after driving 2-3hrs. I have been told it might be the VSS. I might change it this weekend but need some advice. had the Transmission fluid changed and it was clean.

Sounds like the Trans Solenoid Pack. Park it, until you fix the issues and hope no internal damage was done.\015\012Do not throw parts at it. Forget the VSS unless you know how to test it.\015\012Check for codes\015\012Changing Flui ... 2004 Ford E250

My doors do not lock when I put the truck in gear. I also cannot use the lock button on either of the front doors to lock the doors, nor does my remote keyless entry lock or unlock the doors. Also my electric window on the drivers side window does not work but I can put the windows down using the buttons for the other 3 windows ( its a crew cab) My battery died on my truck and I had not had any problems prior to the dead battery. Not sure if it was just a coincoidence?

... 2005 Chevrolet Colorado

2006 Pontiac G6 GT. The gear shift is very difficult and sometimes impossible to come out of park. This has been during cold weather only. The button will not go in all the way. After lots of attempts of pushing in the button and the outside air warming, it can be shifted. Also, there are times when the key will not come out of the ignition switch. We have 2 keys and it happens with both of them. At one point, we were able to push it in a little and then pull it out, but now that doesn't work ei

... 2006 Pontiac G6

I have a 1998 GMC K1500, the 2wd/4wd button has intermittent power issues. If you fiddle with pushing the buttons enough it will shift. The switch seems to be a circuit board. Would this switch be the problem or something else in the system. Also, have not been able to find a replacement dash switch for this. If you push on the switch or the dash below the switch the switch light will come on. There are no ground connections at the dash area.

Same issue and it is a pain in the *** to spend ten minutes trying to shift to 4wd and get it to go in or out. Did replace the actuator on the differential and it still does not work correctly. ... GMC K1500

I have noticed the following electrical problems with a 2002 Chevrolet Malibu. The hazard lights do not work unless the hazard light button on the dash is pushed down and held continuously. When the turns signals are activated they work sometimes, but may also not function unless the hazard light button on the dash is pushed and held on continuously. The right tuen signal, when it works, begins to flash rapidly when the brake pedal is depressed. When the brake pedal is released, the right t

Change flasher relay in fuse box ... 2002 Chevrolet Malibu

I have a 2005 Malibu Classic and the air conditioner works fine but the button to turn the air conditioner will not turn, don't matter how hard you push it or how many times you push it. Also the rear defrost button that is beside it will not turn on either. What is the problem?

... 2005 Chevrolet Malibu

The 4wd light stays on. I have tried pushing the level up and down without success. I also having a problem starting the car (manual gear). I also have a problem while starting the jeep. It is not consistent but often it will not turn on. I put a fuse in the hole that says clutch overide. The car starts more often but not all the time.

Light will not go out until the gears actually disengauge. Typically there is SOME preload on the gears and that keeps them engauged and light indicates so, correctly. To disengauge, move lever to disengauge and drive in left and right circles. This ... 2005 Jeep Wrangler

Have an m3 1998 evo . problem with the changing of gears it seems to hesatate gong into every gear. it will select every gear. also had yellow gear light on dash. its now gone.sometimes get like a frost sign on the dash when i put in the smg button......help

... 1998 BMW M3

I have a 91 toyota pickup. It has a starting problem mostly when I do alot of stop, shop , and go. I replaced starter, starter relay, starter ignition, clean + battery cable, - ground cable, and check coil. I even change a new ignition key and still have the problem. Battery tested 12V. I know alot of people have this problem, but no one seem to know the cause. They just recomend adding an extra power push button lead to the starter. What is it that I am not getting? By the way I have one automa

Not sure how similar it is but I had a supra of the same year with the same issues. It ended up being a bad connection where the chassis harness met the engine harness. I bypassed this section and the issue was resolved. ... 1991 Toyota Pickup
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.4439 seconds