Having problems with your 1993 Saturn SL2 ?

Where can i find the ignition module on a 1993 saturn ?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

The ignition module is mounted under the ignition coils.Just follow the ignition wires from the spark plugs to the coils.
The coils need to be removed from the module. There are two wire connectors to be removed as well.
The setup is similar on both engines available in the SL line that year.
Look at the coils carefully for burn marks from a possible errant spark discharge as this can damage your new module.Replace as necessary.


Repair Help & Product Troubleshooting for 1993 Saturn SL2

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Trying to find where the ignition control module is located on a 2000 saturn LS2 6 cylinder.

Your 6 cylinder 3.0 L has two ignition control module's, the module are part of the ignition coil assembly, there's a right and left bank, hope this was very helpful. ... 2000 Saturn L-Series

Where can i find the ignition module on a 1993 saturn ?

Hello.The ignition module is mounted under the ignition coils.Just follow the ignition wires from the spark plugs to the coils.The coils need to be removed from the module. There are two wire connectors to be removed as well.The set ... 1993 Saturn SL2

I have a Ford Scorpio, that is a 2 litre DOHC, EFi, 5 door saloon, it broke down just before christmas, and I was told that I need a new ''ignition module'' I checked the Haynes manual to see what this entailed to replace it, to find that the distributor has this fitted to the side of it, however my distributor is attached to the engine block directly, and is driven by the camshaft, where on earth is the ignition module on a car with an engine management system ?, because this does not match the

The module is the Gray plugin part that receives the wires going into the Distributor. There are 2 screws which may need a Special Screwdriver to fit the screws and to give clearance to remove the part.\015\012\015\012Usually the module ... 1987 Ford Merkur Scorpio

Finding tacho pulse wire. I own a 1992 Toyota Corolla which has a 1600cc fuel injected motor with electronic ignition. As a base model my car does not have a tacho and so buying a digital tacho I need to know how to find tacho pulse wire coming out from electronic ignition module.

... 1992 Toyota Corolla

Ignition module i was wondering if you could tell me where to find the ignition module for a 1995 plymouth voyager van 3.0, 6 cylinder engine

... 1995 Plymouth Voyager

Trying to find ignition relay module , 93 tracker, will crank but no spark, was suggested ignition relay is bad, just can't find the darn thing. sometimes no power/ just loud clicking noise under dash,

This is a common and serious problem with tracker/sidekick.there are 3 solutions1:ecu is bad and over loads the power feed.fuel pump shorting and overloading feed.one of the other solenoids , doing this same thing. ... 1993 Geo Tracker

I have a 1985 cj-7 with the 258 engine and manual transmission. I had a problem with the coil, the center had corroded, so I replaced it and things ran fine for about four days. Then it just died and acts the same. I changed the coil, no go. I can't find the ignition module the book says it has. It does have a computer behind the glove box. The resistance for the pickup coil is within tolerance. Where is the ignition module or did it have one?

The Ignition Control Module is located under the Plastic coolant bottle inside the left front fender. ... 1985 Jeep CJ7

97 Toyota 4 runner 2.7 4wd auto. I did an engin shut oe swap and it ran great for about 2 weeks. The guy was heading to work and at suddenly it started acting like the fuel pump was bad and itff. After cooling it ran fine again till it got hot. It was acting like an ignition module, but after a few days it wouldn't start at all. Changed coils and fuel pump and crank and cam sensors, no spark noted, and I cant find a ignition module. What could the problem be?

Check for a wire laying on exhaust manifold or rubbing thrue somewhere. ... 1998 Toyota 4Runner

I have an audi a4 1996 and will not start replaced ignition module and it worked but now it does the same thing, the alarm goes off all the time key on electric works but does not crank, i cannot find the alarm box if i can i can bypass the alarm and i know it will be fixed because i had a similar problem to another car. but cannot find it..if anyone knows where the alarm module is please help me out..

The alarm module on the 1996 A4 (B5) is under the rear seat cushion. ... 1996 Audi A4

My subaru legacy 1991 no spark all from the coil assymbly and where to find the crankshft sensor to triger the coil spark there is a two crankshaft sencor one is on the middle of the engine and the other one is on the side of the engine,is this ditributorless have the igniter module whre to find the ECM module and the relay on under passenger hood all the no sign of name to recognice,im starting ne w mechanic i want to learn from expert

Hi!!\015\012\015\012All ignition adjustments are carried out by the ignition control module. In the event the ignition system is not functioning correctly, check for a worn ignition part.\015\012\015\012 ... Subaru Legacy

Ignition igniter I need a replacement Ignition module/igniter for Suzuki Alto. It is fitted to the distributor Part number 33100-70F00 429100-1100. Denso Part number on module: 10 - 00110U07. I cannot find one locally.

We have no parts resources what so ever. Sorry. ... Cars & Trucks

How do I remove and clean an EGR valve for a 2000 Saturn SL? I'm told that I need to replace it's ignition control module and two associated coils as well. Is this easy to do? I'm not sure what the coils are but the control module is way less than half online to buy direct than through my mechanic (300+). I want to replace the module and colis myself as well as clean the EGR valve myself. I was also getting an EVAP reading during the diagnostics. Thanks

Well even if you try to clean the egr valve it will not work,the carbon gets up in there and you cant get in there to clean it out,also there could be other electrical issues inside the egr,,you need a new egr trust me i tried many times as a saturn ... 2000 Saturn SL

1994 chevy G20 van, I have a intermittent problem where the engine cuts out due to no spark, I know it to be this as i connected a light bulb type tester between coil and distributer when problem occurs and when cranking the bulb dont light ,then eventually it will and the engine then starts, I replaced most of the ignition system in one hit to try and cure this, New items fitted where Distributer cap and rotor arm Ignition coil Ignition leads Ditributer module After changing the parts i find

... Cars & Trucks

My 1999 saturn sl2 will not start. It cranks, fuel pump is working but I no spark from the ignition coils or spark plugs. A few months ago the wipers started acting funny (going off when they wanted to) it stop by itself. Then the car started shutting off after running for a while I thought it was because of the car overheating so I replaced the coolant heating sensor and the crank shaft sensor. I have replaced the ignition coils, spark plugs, ignition control module, battery, and alternato

Sounds like a bad timing chain. ... Saturn SL2

I cant find the ignition control module on a 2005 nissan altima

... Nissan Cars & Trucks

Cant find ignition module in 2001 pontiac grand am

Your Coil Pack/Ignition Coils and Module is really on the left side of the engine cover if its the 3.8 V6, you will see three of them as each coil on the module handle two plug wires. You would need to probably mark each plug wires and unplug them fi ... 2001 Pontiac Grand Am

What size bolts hold the ignition coil module in place on a 1996 saturn sl? and how many miles should the module be changed?

... 1996 Saturn SL

I have 280zx nissan turbo. It will turn over but not start. I think I may have the ignition module wired up wrong. Any feedback or pictures will be helpful. Im using the GM module conversion but Im unable to find the ecu wire to connect to it. Please help!

This is most likely not the site to post this, in order for me to answer this here's what i have for you; you need the Haynes manuals for both the Nissan and the GM that you got the harness from. both of those manuals will have the wiring diagrams fo ... 1983 Nissan 280ZX

1997 Honda Odyssey. Problem began several days ago. Radiator fan does not work with ignition on, works with ignition off. (immediately turns on) Checked 7.5A fuses 4 & 8 in main panel by drivers foot. Checked 20A fuses 21 & 34 in underhood fuse/relay box. Is there a procedure for checking the radiator fan control module AND where can I find it? Looked behind the glove box but no luck.

... 1997 Honda Odyssey

Ignition vehicle turns over but no fire from distributor. replaced rotor and cap and still no fire. there is a part that is a egnition module that has two screws that is supposed to mount to the inside or the outside of the distributor and we cant find it plus we dont know if that is the problem or if it is the electronic control module which we dont know where it is located. We think it is either under the passenger seat or on the fire wall on the passenger side. Anyway we dont know where they

What the firing order for a 92 Eagle Summit with a 2.4 Mitsubishi ... 1992 Eagle Summit

Finding ignition module and engine control module on 89 gmc k 2500

... 1989 GMC Sierra

2005 saturn ion 2. Will not start. Engine will crank but will not fire. Have fuel preess at fuel rail. Can hear fuel pump. Ignition module and ignition coil pack changed recently. Spark plugs changed less than 3000 miles ago. Where can I go next?

The first thing to do is scan the computer for codes,also when the module was installed did you clean the mounting area good? the next thing i would look at would be the crank sensor, also theres a reprogram on these cars,the dealer needs to install ... 2005 Saturn ION

2002 Isuzu rodeo, engine will shut down. Took it to shop said it was the Ignition control Module. Had that fixed. Still shutting down and blowing the ignition fuse. Took it to the shop again. They said it was a short somewhere but could not find it. Any ideas?

... 2002 Isuzu Rodeo Sport

Does a 1996 Achieva have a Ignition Module? I have the 3100 V6 Computer Controlled Coil Ignition (C3I) system and I was told that might be my problem to previous problem but cant find out where it located at.

The module is located under the coils. ... 1996 Oldsmobile Achieva

93 saturn i have a 93 saturn I replaced the coil and ignition module sometimes starts but sometimes has no spark

  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.4248 seconds