Having problems with your 1993 Jeep Grand Cherokee ?
Need to replace the control arm bushing - 1993 Jeep Grand Cherokee
Unless you have a good press leave it to the workshop.
Repair Help & Product Troubleshooting for 1993 Jeep Grand Cherokee
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Need to replace the control arm bushing - 1993 Jeep Grand Cherokee
Unless you have a good press leave it to the workshop. ... 1993 Jeep Grand Cherokee
I have a 2004 jeep grand cherokee with a bad rear upper control arm ball joint. How do i go about replacing this... i really do know how but i want reassurance!!!!! Would i need a compressor... i dont think i would have to but thats why im asking! thanks.
Air compressor or spring compressor? If spring, no...once you drop the suspension down, the springs will have no tension on them. ... Jeep Grand Cherokee
How to replace the upper control arms on 95 Jeep Grand Cherokee
Aside from worn bushing needing replcement, I have never heard of a control arm bushing causing a shimmy. Try to be more specific i.e. at speed , bumps ? How many miles on Jeep ? ... 1995 Jeep Grand Cherokee
How do I replace the upper Control arms on My 1979 chevy 1/2 ton pickup. I saw a replacement control arm that has the bushings and ball joints already installed. I'm trying to save the high labor cost that this involves. I can replace the ball joints myself but I know that you need special tools to replace the bushings. Would I still need to try to get this tool since the new upper control arms have them installed already?
Since the new arm comes with the bushings, there is no reason to get the tool to install them. Upper arms are relatively easy to install...just a bolt out, bolt in operation as the springs aren't involved. Support the suspension under the lower contr ... 1978 Chevrolet C1500
The passanger compartment thermostate dash control is stripped and I can no longer controll heat and AC. I need to replace this control. Where can I order the part. 2003 Jeep Grand Cherokee Larado
Go to your local jeep dealership or check on ebay, just be wary on ebay and make sure you check part numbers first. ... 2002 Jeep Grand Cherokee
My 1993 Jeep Grand Cherokee Laredo 8 Cyl. has a loose linkage that controls wether the vehicle is in park, drive, ect. I obviously need it replaced but need to know how to do that and what the actual name of that linkage is.
Your shift selector linkage. Make sure the cable is actually streched, and not just loose at either end. Commonly when it doesn't function correctly the wable adjustment is loose at the transmission. It an arm with a solid linkage to it as well as po ... 1993 Jeep Grand Cherokee
1996 grand voyager need to know how to replace front lower control arm bushings, tools needed ect...
Cheaper to buy a new one that already has new ball joint and bushing installed, just swap out old one.no fuss no rental tools , etc.. cheap around 120.00 shop around. u will pay that for ball joint and bushings. ... 1996 Plymouth Grand Voyager
Hi, I have a 1995 Jeep Grand Cherokee 6 cylinder, 2wd. I need to replace the A/C Fan relay switch but I don't know where the relay is. Can anyone help me to locate the relay switch? The issue my Cherokee is having is, when I shut off the engine the fan will not shut off. So the battery will die. Also I can no longer can control the fan-a/c on the console. It just runs loud and blows air out as though the fan is on high.
Under hood in high voltage fuse box ... 1995 Jeep Grand Cherokee
Front Differential Actuator. How do I replace the axle locker actuator? I was told by dealership that I need to replace due to "service 4wd System" indicator that stays on constant. Any advice greatly appreciated. Part number is 52114003 AF. The technician said that he ran a flash and upgraded from AF to AM (I'm assuming this is a version control of sort). 2006 Jeep Grand Cherokee Limited 5.7L Hemi
... 2006 Jeep Grand Cherokee
When I make tight turns with my '96 jeep cherokee it begins to jump badly until I come out of the turn. Have had the arms and control arm bushings replaced and told this would fix the problem. It didn't. Now What?
Is this full time 4 wheel drive? if so you my have a front differential problem ... 1998 Jeep Grand Cherokee
Replace Wiper Control Switch for 1999 Jeep Grand Cherokee
... 2000 Jeep Grand Cherokee
I have rear end noise on my 2001 Jeep Grand Cherokee Laredo V6. Loud. clunking noise coming from rear end at even small bumps. Mechanic said it was a control arm. But he also said the part alone would be 500.00 is there even a part other than the entire rear end that expensive?definitely coming from the rear. I checked the spare tire to make sure it was secure. Bounced bumper and still hear the problem. it has me worried but i have been ripped off before i just need some information before i
\015\012Hi!!Control arms generally do not wear out, however the bushings that mount the control arms are made of rubber and will need to be replaced periodically. the bushing kit is about $20, the Upper Control arm is $70.99 and t ... 2001 Jeep Grand Cherokee
Have rear end noise on my 2001 Jeep Grand Cherokee Laredo V6. Loud. clunking noise coming from rear end at even small bumps. Mechanic said it was a control arm. But he also said the part alone would be 500.00 is there even a part other than the entire rear end that expensive?definitely coming from the rear. I checked the spare tire to make sure it was secure. Bounced bumper and still hear the problem. it has me worried but i have been ripped off before i just need some information before i go to
It maybe just a bushing in the rear control arm so act like you know something about vehicles.. eg: Family member is a mechanic for instance ... Jeep Grand Cherokee
I have a 1999 jeep grand Cherokee and there is a loud thud in the rear end every time I hit a bump, it's okay on smooth roads but noticeable on bumpy roads, just wondering if its the rear shocks or the upper and lower control arm bushings?
... Cars & Trucks
How to replace upper suspension control arm on 1999 jeep grand cherokee
... 2001 Jeep Grand Cherokee
Does the motor for the vent control need to be replaced on my 1996 Jeep Grand Cherokee or do you think it could just be a vacuum leak. I can not switch positions of the air flow coming out.
... Jeep Grand Cherokee
I need to replace the ball joints on my 1997 GMC K1500. I want to replace the upper control arm and bushings as well as the tie rod ends. I was leaning towards MOOG but can't seem to find the control arm from them. I would also like to shorten the project a little by purchasing the control arm and ball joints assembled. O...O...O...O-Rielly has this setup with their Master Pro brand but I know nothing about that brand. What should I use so I only have to do this job once?
... 1997 GMC Sierra
I HAVE A 1999 JEEP GRAND CHEROKEE, 112,000 MILES. JUST FOUND OUT BALL BEARINGS NEED REPLACING. THE MECHANIC SAID WOULD COST $1,600- $1,700 TO FIX AND THAT THE RODS OR CRANK MAY NEED REPLACING BUT HE WILL NOT KNOW UNTIL HE GETS "IN THERE" IS THIS TRUE? CAN A JEEP DEALER TELL WITH JUST CHANGING THE BALL BEARINGS AND /OR SHOULD I EVEN BOTHER GETTING THIS FIXED? (PLEASE DON'T SAY TOO BAD I DID NOT GO FOR CASH FOR CLUNKERS!!) LTW
The front bearings on a Jeep should have lasted longer but, there you go. When he disassembles the front end to replace them he should check the steering linkage and suspension since they are weaker than the bearings and even more prone to give out. ... 1999 Jeep Cherokee
We have a 2004 Nissan Quest and they have told us that we need to replace the driver side low control arm bushing, how many bushings do we need or do we have to replace the whole thing ? They could not do alignment because of this !!!
The control arm has all the bushings pressed into it. Replace the entire lower arm. Probably around $300 with alignment. ... 2004 Nissan Quest
I have a 2000 Jeep grand Cherokee. Can the bearing and crank shaft be replaced without having to replace the entire motor? They are telling me I need a new motor, but when I told them i couldnt come up with the money, they suggested that maybe I just need to replace bearings and crank shaft. But.....before they were telling me I had some "metal shavings" in my motor now. There were some very tiny groves in the crank shaft. And the bearings were looked like they had burnt motor oil on them.
Yes the crankshaft and the main bearings can be replaced w/out changing out the motor. You can probably get a motor out of a wrecked Jeep and have it installed for under 1,000.00 and have it done quicker than replacing the crankshaft, and main bearin ... 2000 Jeep Grand Cherokee
1997 4.0 jeep cherokee sport, replaced the upper and lower radiator hose to fix a leak, leak still there. What does the lower radiator hose fit on the engine block? that's what i need to fix. I also replaced my front shocks and I'm getting a weird vibration from my drive side wheel. I belive I need to replace all of the rubber bushings to fix the problem?
The lower rad hose goes to the water pump, as for the vibration it could be many things, tires, shockbushings, tie rods, ball joints, control arm bushings, you will have to investigate further ... 1997 Jeep Grand Cherokee
1988 honda prelude, 120,000 miles, was told by mechanic it needs replacement of the left front CV axle assembly, the boot on the power steering rack, and the bolt and bushing on the control arm. then now he tells me the transmission needs replacing. should I cut my losses and forward him the title to forgive the $600 bill for the initial work.? no body damage also needs new tires. Thanks, Alix
Hi,All I can offer is personal advise on this one and largely it depends on the value you place on the car however just a couple of questions I would be inclined to ask, why has he suddenly decided it needs a new transmission after carryi ... 1988 Honda Prelude
Can you replace just the bushings in an '03 Kia Spectra or do you have to replace the entire lower control arm? Mechanics are telling me you have to replace the entire control arm even if its just the bushings that are bad, but I found bushings available online for much cheaper than it would cost to replace the entire control arm.
Ok but factor in the labor cost ($$$ per hour) of pressing out the old bushings and installing the news to just replacing the whole assembly. In the end it is your choice. ... 2003 Kia Spectra
I have a 1997 Jeep Grand Cherokee Laredo that the top hose that leads from the radiator to the thermostat blew the other day. I replaced the hose with no problems but the gauge in the jeep keeps indicating overheating and the code reader has a code that has the temp sensor error. This sensor which I found on the top of the thermostat top was wet inside from the coolant. Could this have shorted the sensor and does the thermostat need replacing as well?
Thermostats become unreliable and really should be replaced any time the engine overheats for any reason. After replacing it, fill the system using plain water (just in case it overheats again) and run it and check for problems If the sensor had cool ... 1997 Jeep Grand Cherokee
I have been informed by a local shop that my wife's Volvo needs to have the bushing replaced on both of the front lower control arms. My wife Volvo has less than 50k miles. As a result, I am very surprised that they already need to be replaced, but mostly concerned the cost of the parts. Any feedback would be appreciated.
I would be also. Without being there to see them myself, I can't diagnose the problem. But you can check them yourself if your up to it. You have to raise the front of the car to get the wheels off the ground. you can do one at a tie if you want. you ... 2002 Volvo S60