Having problems with your 1993 Geo Storm ?

Front axle how do you change front axle

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 1993 Geo Storm

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 1997 dodge ram 1500 with a dana 44 front axle. the front axle is leaking oil and the seals nedd to be changed. How do i change them?


... 2004 Dodge Ram 1500

Front wheels will not engage on my 350 Automatic 1988 chevy 4X4 CK2500 silverado. I have had an intermittent problem in the past but it eventually would work. Now there are no indicator lights on the transfer case shifter and it will not lock in the front wheels. I changed out the thermal actuator on front Axle and cleaned all connections at the front axle plugs but the 4X4 still will not lock in. What else could be causing the problem? I heard maybe a faulty T-switch? where is this t- switch


On that truck your fuse for the instrument panel is the same for that actuator. ... 1988 Chevrolet K2500

Vibration from the front end (feels like right front). Changed transmission, transfer case and rear end fluids. Replaced left front CV axle. Might the right front CV axle be the problem? The vehicle is the v6, automatic, auto 4WD model.


It could be the right side CV. Have you thought to put the spare on the right front to eliminate an out of balance tire? Then if it does not help you can switch back when changing the CV. ... 2002 Ford Escape

My front right tire was unbalanced so the car was shaking when i was driving for a while. when i changed my tires the transmission oil leaked out of the right axle. where the axle and the transmission come together.so now i bought a new bearings but i dont know how to change it.can i change it without opening the transmission?


Actually i dont think you are going to need a new bearing but a new seal unless they are the same for your car. As i mean that the bearing and seal are one unit. And no you will not need to open the transmission to pull the seals out. They are in t ... 2001 Hyundai Elantra

Front axle how do i change front drivers side axle on 93 geo storm


Remove the tire. remove the strut bolts. remove the axle nut. push the axle out of the hub(hammer out if necessary). Pull/push the hub away to get the axle completely out. Use a pry bar to get the axle out of the transmission. replace in reverse ord ... 1993 Geo Storm

Humming noise sounds like from the front end. I just replaced wheel hubs and still making noise. The tone of the humming changes with slight on off the gas pedal. I just ordered new front axles thinking it could be bearings in cv joint going bad and they were never replaced. I have 130,000 miles on 2000 durango. Noise tone also changes when turning to the left.


Check side carrier bearings in the diff i have rreplace a lot of them for the same noise thats all you have to do remove the diff cover remove end caps and see if the bearings are pitted if so replace ... 2000 Dodge Durango

Front axle how do you change front axle


... 1993 Geo Storm

Front left axle seal leaks. I just change the axle ujoints myself on this truck. Anyone with advise on changing the left seal?


... 1997 Dodge Ram 1500 Club Cab

In my 2004 vibe, there is a noise coming out of the front end that sounds like a roaring sound. Put new tires on and it still persisted. Changed both front wheel bearings and it is still there. The cv axle boots are good and do not sound rough when rotated. The passenger side axle seems to have some excessive play where it enters the transmission. Any ideas about this problem?


... 2004 Pontiac Vibe

Front axle I had my oil changed today. My car needed a "lot" of tramsmission fluid. The mechanic said I had a front axle leak. I figure I'm under the 100,000 mile warranty; however, before I proceed I want to make sure it's not my fault. Last year my granddaughter went into a ditch with my car. It was turned on it side and all the transmission fluid poured out. the mechanic who did the body work said there were no problems with the transmission. It just poured out due to the position of the car.


When your daughter turned the carover where did the oil come out of did a drive shaft pop out as you need to find out as oil just doesn,t come out of the box once you find out let me know because if the garage did any work on the box even putting a d ... 2006 Hyundai Elantra

Sounds like change jingling front right axle area


Previous owner jumped what? You have a lot of words there but what I see is your front end rattles when going over bumps and you can move the differential but don't know whats allowing movement. Have someone make it move and look to see what's movi ... 1999 Chevrolet Silverado 1500

2003 GMC Sierra 2500HD with a front end vibration. Vibration is a very distinct popping that is synchronous with ground speed and causes the left front tire to deflect. Could this be the front differential. So far I've changed out the ball joints, upper control arm, the left drive axle, and had the front drive line balanced with new u-joints installed. I'm at a loss.


For my truck 2003 GMC HD I had a vibration and I changed my rotors they were worped and that solved my problem ... 2003 GMC Sierra 2500HD

Noise Have a 2006 Chevy Impala. Makes "grinding" noise like I have knobby tires on it in the Front. By jacking it up and running the car in drive, the noise is coming from passenger side at the transaxle end of the right cv axle (I have already replaced that cv axle and it did not change anything.) When I had the cv axle off, the wheel bearing did not feel like it had any play in it and it rotated smoothly. The noise pitch corresponds to the vehicle speed whether accelerating or coasting. T


Based on your description, I would say it probably is the differential gears, and I would not drive it on the highway until you get it inspected. Very unusual for a car that new. ... 2006 Chevrolet Impala

Changing struts I certainly am not a mechanic, but have tinkered plenty. Tackled changing the front axles on my daughters camry and am wanting to try changing the struts on my wifes buick. How tough of a task is this rated for the average joe?


Too tough....be careful but no pain no gain ... 1993 Buick LeSabre

I have 1991 buick century with a 3.3 in it. I changed a front axle seal. Now ti will not shift out of second gear. The tranny shifted fine before I changed it. I also changed the filter and transmission fluid. Is the transmission bad or could it just be a stuck throtle valve? If it is a stuck throttle valve how do you fix it?


... 1991 Buick Century

I have bad road noise after 40 mph. This started after changed tires and both front boots and axles


... 2006 Subaru Outback

Changing front passenger axle


It is fairly simple, Block your wheels and loosen the lug nuts a little, jack your car up until you have the tire off ground, remove tire, remove the center nut on the tire hub. pull the whole assembly uot and away from the car, let the assembly hang ... 1995 Mercury Villager

How to change front axle 2003 suzuki XL7


... 2003 Suzuki XL-7

Axle leak 2004 Hyundai Elantra. We had the oil changed & they told us the front, passenger axle has a leak. How do we fix it? How much time before it causes problems?


This sounds like it could be either the C/V (constant velocity) joint boot cracked and oozing grease, or the axle seal on the transmission could be damaged. If just for peace of mind, have this checked out as soon as possible. These are not costly re ... 2004 Hyundai Elantra

I have a terrible vibration on my Honda CR-V 2003 at high speed. I felt the vibration in the front when speed goes to 120 km/p. I have replaced the broken cv inner boot a week ago. I'm very confused right now and i dont know what to do. I have read lots of discussion about to solve the problem, Change the tires and have it balanced, replace the axle, change the wheel bearings etc. Can you help me PLEASE! Thank you!!!! Jon


... 2003 Honda CR-V

I have a 2001 Dodge 2500 diesel 4x4. Sometimes the front axle makes a grinding sound, it happens frequently when turning. Could it be my hub assembly or does the front diff., fluid need to be changed and more anti-slip fluid put in?


My '01 dodge 4x4 diesel had a simular problem turned out to be the dust cover or backing plate that had somehow moved probably due to expansion and contracting from the heat! ... 2004 Dodge Ram 3500 Truck

I am having a problem with the 4x4 on my 91 jeep wrangler. It has a 4.0 liter strait 6. Whenever I shift it into 4x4, every 8 to 10 seconds I feel a thump as if is it is popping out then back into 4x4. Occasionally I can see the 4X4 light blink off when it thumps. I changed the shift motor on the front axle but there was no change. I don't know where I should look next. I have suspected a problem in the vacum hoses but most of the hoses are inside wire bundles making it a bit tricky to trace the


You can take apart the CAD vacuum assembly on your front dana 30 and install a 1/2 inch bolt to lock the inner and outer stub shafts together. That will solve your problem. The vacuum actuated system sucks, to be kind. Or like this joyellowhors sa ... 1991 Jeep Wrangler

There is a sound when i turn the wheel towards the right. i just had my lexus es 250 fixed because of this terrible sound, big o changed my 2 front tires and the axle and left front arm and aligned the wheels. but i still hear a bad sound everytime i move my wheels to the right. Going straight and left turns and curves are ok, no sound at all. What's wrong with my 1990, 202,200 mileage car? Thank you for your help.


Just check the wheel allainment ... 1990 Lexus ES 250

Transmission fluid when do i change transmission fluid and filter in 2001 4X4 frontier. And also, when do i change gear oil in front and rear axle housing.


I think the trans is every 60,000 and the front and rear gear oil may be at the same time...refer to the owners manual ... 2001 Nissan Frontier Crew Cab

4wd light on dash not working, changed switch on shift, bulb in dash and 4x4 computer control behind centre console. Also changed both switches in front axle but still no 4wd. Why?


Dear Fixya,\015\012\015\012Solution at hand. I chased the harness to the gearbox. I methodically electrically earth tested each wire-to-switch and visually checked each wire for breaks whilst another kept turning on and off the 4wd switct ... 1993 Toyota Pickup
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.6306 seconds