Having problems with your 1993 Dodge Stealth ?

I want to know if the timing belt need to be replace the valve will be bad

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Yes, the double overhead cam and turbo engines are interference type.
So if the timing belt broke while the engine was running, the valves could be damaged.
Repair Help & Product Troubleshooting for 1993 Dodge Stealth

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I want to know if the timing belt need to be replace the valve will be bad


Yes, the double overhead cam and turbo engines are interference type.So if the timing belt broke while the engine was running, the valves could be damaged. ... 1993 Dodge Stealth

My car is making a clicking sound when I turn to the right and just started making the sound when I turn to the left. It is getting worse everyday and in the morning is when it is really bad. What needs to be replaced? It has 120,000 miles and I have already done everything recommended at 90k as far as maintenace like change timing belt, etc. Please help I love my car and I just want it back to normal, but I would like to know what it is before i see a mechanic.


Clicking souns is usually the result of the u-joint boot being busted and then sand and such get into the u-joint and destroy it, menaing you have to replace the entire assembly. It's best to fix the boot before the damage is done, and it costs less ... 1995 Lexus ES 300

I need to replace the EGR valve on my '99 Saturn SL1. I have the part and I know where it is located. I would like a diagram or something to walk me through this. A friend replaced it last time but I want to do it this time. I just want to be sure I do it right. Thank you!!!


On most vehicles just remove wiring, the emission pipe, then remove the bolts holding it to engine. ... 1999 Saturn SL

I need to know where my egr valve is and upper penium so that I can remove the egr valve the easiest way. I am a woman but I have to do it myself and I could use a diagram or good instructions and the typpe of sockets I need besides 1/4" socket. I want to clean egr and put it back. I am on low funds and this is the second time I have problems with this. I replaced once years ago and it is just about dying again at stoplights just like before. I NEED' HELP ASAP PLEASE?I have a 93 GMC Safari van 6


Nikki, sorry I don't have any pictures of your EGR valve but a lot of parts stores have on line catalog so you can see what it looks like. The EGR valve is there a two bolts that hold it to the intake manifold s ... 1993 GMC Safari

Timing belt idler pulley went bad. belt wore down on one edge, but did not break. do i need to pull head, and check valves, or can i replace belt and pulley then re-time?


You should be good with just replacing idler. ... 1999 Ford Escort

I NEED THE PROBLEM SOLVED ON 2001 DODGE NEON THE ALT BELT WONT STAY ON JUST A CLICK OR TWO AND IT COMES OFF COUPLE MONTHS AGO I REPLACED TIMING BELT HEAD GASKET AND VALVES IN HEAD WAS REPLACE PUT IT ALL TOGETHER AND NOW THE ALT BELT WANT STAY ON ALT PULLEY


It sounds like you have a pulley alignment problem with one of the pulleys.did you have any left over washers or spacer not put back.the other problem is the belt tensioner may be worn and need replacing.these are the usual ... 2001 Dodge Neon

1996 Mazda Millenia 2.5 liter V-6 24 valve double overhead cam. Had to replace timing belt. Need to know the timing marks to line up the belt.


... 1996 Mazda Millenia

1997 Neon- DOHC. My timing belt broke or came loose. I am told that this engine is an "interference" engine. Before I repair the bad water pump and replace the timing belt,,how can I be sure that the valves and/or pistons have not been damaged? Do I need to take the head off? Any other way to figure this out? The car is not worth putting a lot of money into it if the valves/pistons are damaged. Thanks.


Since the camshaft and valve train are not connected (by the belt) to the crankshaft and are most likely out of time, any rotation of the camshaft or crankshaft may cause damage to the valves. The safe way to go is to remove the camshafts and let al ... 1997 Plymouth Neon

I have a 2000 Plymouth breeze, 2.4 l dohc. The Pulley behind the alternator seems to be loose, and the belt has come off. Can you give me a diagram of what needs to be removed in order to replace it? the car seems to have two belts, one I know is for the cam and timing, the other I believe runs the accessories, both coming from the harmonic balancer.I have not started taking it apart yet I wanted to research photos, or how to, I have been repairing cars for a long time, but I am less knowledgeab


The belt that goes to the cam and timing dont mess with that unless its one of those pulley's, there are no diagrams that can help u but u can buy a book. ... 2000 Plymouth Breeze

I have a 2001 model 1.6 Subaru Impreza. Japanese import. I need to replace the timing belt and want to know how to allign the timing marks correctly before putting on the knew belt.


... 2000 Subaru Impreza

I know just enough about car mechanics to be dangerous. I replaced the water pump and put the timing belt back on just the way it came off and it must have slippied a tooth. I need to know how to reset all the timing marks. 1 of the manuals send that when you release the pin holding the belt tensioner, the holes should still line up. My plunger moves upwards about about 1/4 inch, does that mean it needs replacing. As far as aligning the timing marksI know it all starts with find the TDC but how


TDC can be found by re-installing the cover and referencing the "0" mark on the timing scale with the hash mark on the pulley. If there isn't one, your other option is to make a reference mark on the pulley and a reference mark in the same place on a ... Chrysler Sebring

U' m repairing the head on 05 kia rio timing belt slipped and juped time bending all the valves Now putting the head back on I need to know if the head bolts neeed to be replaced and how to torq


Try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your ... 2005 Kia Rio

Timing beat 2002 honda civic I want to know what a car acts like if thg jumps or if you need a timing belt ? my car running really bad and backfires when i start it sometimes


Its possible its the timing belt. maybe it jumped check it out. could also be a sticky valve or electrical prob. ... 2002 Honda Civic

My Getz 1.5 CRDi with 170 000 km timing belt broke and caused damage to the engine. The garage replaced valves, guides, rods, lifters, camshaft and whatever was needed. Since then the engine does not want to run smoothly. Compression test show big diffirence in the cylinder readings and after opening the engine again and replaced items this is still the same but only on some other cylindres. When started it runs smooth for 20 min and theirafter unevenly, It seems to loose tourque after a while.


Without taking out the engine and going through all the tolerances,\012i would,bearing in mind the engine has to get hot before you loose power,check the valve/cam clearances,(the obvious first choice).then check the compresions again.the only ... Hyundai Excel

I have a 2003 Aerio and i wanted to know whether it has a timing belt or timing chain, if it is a chain does it need to be replaced or serviced, the car has 275,000 miles on it.


The chain will NOT last the life of the engine. Most of the time the chain guide is what needs to be serviced. If you have the service records on the car and it has not been done then do it as soon as possible. Either way you may want to think about ... 2003 Suzuki Aerio

Just did a top end new valve seals head gasket laped the valve seats went back togather with it timing marks lined up it wont fire realy confused want to know if 1995 Geo Tracker needs the alternator or water pump belt hooked up in order for it to start it seems like its fouling plugs right now


No u dont need them hookd up to run u do need to see if ur getting inch to inch half spark if ok check vakve movment see if to tight and lifters not pumping up and if all else fails new plugs cut the fuel if dont start call me im at my shop 6 days a ... 1995 Geo Tracker

I have a 2003 kia sportage 2000cc can anyone tell me if the engine on this is a interference or none interference It is registered september 2003 the timing belt has broken and I need to know if the valves drop or not before replacing belt


The term interference refers to the valves being in the way of the pistons when they move to the top of the cylinder. When the timing belt breaks, the valves will stay in the position they were in when the belt broke, they will not move or "Drop". ... Kia Sportage

Replaced head on 1990 740 wagon, volvo, 4 cyl, single OHC, non turbo, interference engine. Need help with timing belt adjustments prior to firing up engine. Have #1 and #4 cyl at TDC with both sets of valves closed. OHC gear timing mark lines up with mark on timing belt cover, belt goes over tensioner and goes around another gear located further down on the engine. My question concerns the lower gear. Are there timing considerations for this gear in addition to the OHC gear? Do I need to tim


... Volvo 740

Valve timing off no compression.. timming belt has slipped I am trying to replace the belt but i want to make sure that the valves are in the right order since the belt was missing numerous teeth... the books all show how to keep it it time when changing the belt but not how to re time it


There is a timing kit for timing the focus one locks up the crankshaft and the other fits into the slots on the rear of the camshafts all the pulleys cam and crank dont have keyways they are freefloating when loose and if it jumped more than one too ... 2001 Ford Focus

I have a 1985 BMW 325e, while I was driving, my timing belt broke and I had to replace it. I got a mechanic to replace the belt but my car still wont turn on... he says the timing is right and it makes a spark but it just wont turn on. He says its the valves but I would like to know another opinion of why my car wont turn on? Unless it IS the valves...


When the timing belt brakes the valves have to be redone automatically. Whoever did the work should know this. You can call the service dept. of the BMW dealership and they will tell you the same thing. ... 1982 BMW 325e

I want to replace my timing belt and tune up i bougth a second hand galant 1990 model. is it proper for me to replace the timing belt and tune up the car and i want it change oil, how many liters of oil is the engine needed?


It takes 4.7 quarts. No need to change the timing belt unless you want to. How many miles are on it would be a good indicator of whether or not to change that belt. Doing a tune up on the car is good practice. ... 1990 Mitsubishi Galant

The timing belt on our 1993 Plymouth Acclaim just broke. Do we need to replace the water pump and the valves when we replace the timing belt? The guy at the garage says the valves are full of gunk!!


Well this is what you have to do send the cylinder head to a machine shop for any internal damage check any bend valve install a new water pump new timing belt and problem solve ... 1993 Plymouth Acclaim

My car, 1994 Mazda 626 4cyl,would not pass emission testing. The shop said I had no compression in one cylinder. I was told I needed a valve job. As a part of that, I went ahead and had a new head gasket set. The shop has since replaced all the machined parts and the car won't start. I don't know much about car repair, but my theory is that it may be related to the timing belt and all the shop did was remove the parts that I mentioned above, sent the parts to the machine shop, got the parts ba


"Is the timing belt a consideration in the above repairs? \015\012Yes, the timing belt must be installed correctly or the engine will not start. The timing belt was removed and reinstalled when this repair was performed and any mec ... 1994 Mazda 626

Just bought a 1999 mazda mpv lw with a 2.5litre v6 engine and was wanting to know how often the timing belt needs replacing.


In most cars it is 100,000 miles ... 1999 Mazda MPV

Replaceing timeing belt, need to know location of crank @ two top valve pullys on 2001 Dodge Caravan 2.4 l


Here are the marks for the marks for the 2.4L\015\012\015\012 ... 2001 Dodge Caravan
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.4111 seconds