Having problems with your 1992 Pontiac Grand Prix ?

Having problems with my turn signals, they do not work when i just click the turn signal, I have to hold them in a specific way for them to come on.

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Step by step heres what you got to do
\015\0121.disconnect battery ground cable
\015\0122.remove nut retainer and jam nuts hten steering wheel
\015\0123.remove turn signal cancel cam assembly
\015\0124.remove hazard warning screw and knob
\015\0125.move the turn signal switchso you can access the turn signal screws and housing screws which can be accessed through the opening in the switch
\015\0126.remove housing screws and housing
\015\0127.only on models with tilt steering wheels remove shoe pin retainer cap
\015\0128.remove pivot switch screw and pivot pluse switch assembly
\015\0129.remove turn signal screws
\015\01210.remove wire prtecting from opening in instrument panel bracket assemblyand seperate from wires
\015\01211.disconnect turn signal switch connector from ignition and dimmer switch assembly connector
\015\01212.disconnect 17 wy lock from turn signal connector
\015\01213.use ternimnal tool #j-35689-a or equivelent, disconnect wires on buzzer switch assemble from turn signal connector
\015\01214.remove turn signal switch assembly from column
\015\01215 reverse to put back together
\015\01216. please note that signal and column housing screws got to be torqued to 35 inch lbs the switch screws at 20 inch lbs hazards at 7 inch lbsand the jam nuts at 30 ft lbs
You have to either replace or repair the turn signal levers
of your car. From your description, a part of it is already broken such that the lever turn signal does not hold
Repair Help & Product Troubleshooting for 1992 Pontiac Grand Prix

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Having problems with my turn signals, they do not work when i just click the turn signal, I have to hold them in a specific way for them to come on.

Step by step heres what you got to do \015\0121.disconnect battery ground cable \015\0122.remove nut retainer and jam nuts hten steering wheel \015\0123.remove turn signal cancel cam assembly\015\0124.remove hazard warning sc ... 1992 Pontiac Grand Prix

1998 Ford Windstar 3.8...a few problems... 1) drive belt keeps slipping off 2) smoking coming from under hood on side of engine where belt is, temp gauge not showing hot and smelling a bit like coolant 3) speedometer/odometer stopped working but all other gauges including RPM works 4)van wants to die when coming to a stop or slowing to turn...not every time but a lot 5) right turn signal don't work and makes a funny noise if flipped up all the way but works and no noise if hold it just belo

Hi, 1 & 2 sounds like you need a water pump.\015\0123: probably the vehicle speed sensor has packed up.\015\0124: could be a number of things, vacuum leak or maybe idle air control valve\015\0125: replace switch.\015\012 ... Ford Windstar

Turn Signals i have an 85 ford econoline rv when i turn the left turn signal on the 4 way flashers come on and the left turn signal light is on on the dash but when i turn the right side on theres no light on the dash but the 4 ways come on

Do the hazard lights work correctly ? ... 1985 Ford Econoline

I have a 2001 Chevy impala 3.8L. My headlights for some reason quit working. Both of them. The ony way I can get them to come on is by holding them on and it's the brights that will come on. As soon as I let go of the handle though they shut off. The parking lights and te turning signals work fine. If someone could help me out that would be greatly appreciated. Thanks a lot. Skyler

... 2001 Chevrolet Impala


Clean the sockets and put in a new bulb the blinker and stop bulb have 2 different functions one may work while the other dosent ... 1994 Chevrolet C/K 2500

My problem is when I turn on the headlights, the parking lights comes but not the headlights, but when I hold the turn signal switch / highbeam to the rear the driving lights comes on but I will have to hold it in place to rear without clicking over to the highbeams for the lights to stay on. When I releases the turn signal the lights goes off. What causes this or is the turnsignal switch bad ?

You might just have two bad low beam headlights, I have seen it before. Only other problem would be the switch that turns on the headlights is bad. Best way is to Test power going into the headlight when the low beams are turned on to rule out the sw ... 1983 Oldsmobile Cutlass Supreme

The turn signal relay keeps ticking even after the turn signal switch is in the off position. when I hit the brakes it stops, but if I press too hard on the brakes it makes a rapid clicking noise. The thing is the turn lights don't come on when this happens, only when I turn the signal lights on do they come on. and so far there are no warning lights on the dash. Plus a friend of mine pushed down a little on the 4-way flasher switch on the top of the steering column, and it went away if he held

I had the same problem and I took the switch a part due to the almost $600 new one. You have to be patient everything is plastic. But once a part I found that the contacts were tracking ( a lot of dirt and grease build up.). The steering wheel doesn' ... 1998 GMC Jimmy

I have 2004 Ford Crown Victoria for a month or so now my headlights click and go on and off, when i am driving at night i have to hold the turn signal back like for the bright lights, thats the only way they stay on and then i will hear a click and they will come back on every once in awhile. They do this through out the the whole trip while im in my car on and off all night it is getting very troublsome and pissing me off, or im going to get a ticket from the cops if i cant find out what i can

Replace the headlamp dimmer switch if holding the directional back get these lights working properly ... 1992 Ford Crown Victoria

No dash lights. Turn lights on and fuel guage and temp gauge go all the way past full and high. Both turn signal indicators come on. High beam indicator comes on when lights are on low beam. Turn light switch all the way to the right and gauges go back to normal and turn indicators and high beam indicator go off.

... 1993 Plymouth Acclaim

1999 buick century. headlights won't come on automatically. Nor will they come on when pulling out the headlight knob. Bright lights will turn on if I hold (and continue to hold) the turning signal switch. Is this a problem with the turn switch? How hard is it to replace? Any special tools? I work on appliances, not cars - so any help would be appreciated.

Sounds like you don't have power to the switch or the auto switch.When you pull on the turn switch you are just flahing the high beams.Almost all gm's will do that.Would try and check fuses or get a wiring digrahm and see were the power comes from to ... 1999 Buick Century

Why sometimes my turn signals just quit working. they will work for a while and the next corner they wont work. the four way flashers work only sometimes. if you hold in the button they will work and than the next time you turn them on they will work just fine. we are trying to locate the relay for the 4 ways and turn signals and are not having any luck. could you please help us with this matter. thank you

... 2003 Chevrolet Impala

When right turn signal is turned on the 4 way flashers come on. when left turn signal is turned on it works fine. any suggestions?

Possible bad ground on the right side signal causing a back feed.\015\012possible internal turn signal switch.\015\012possible turn signal flasher malfunction.\\\015\012possible corroded trailer wiring causing a backfeed. ... 2003 Chevrolet Silverado 1500

My 93' Dakota keeps dieing when I come to a stop. It does not do it every time ~ just now & then. The only way I can get it to start is to hold the gas pedal all the way down & turn the ke

Okay, I'm guessing you have a 4-clyinder Dakota has throttle body fuel injection. I have seen this kind of problem before, but I could be way off base. Are you getting really lousy gas mileage as well? If the coolant sensor fails to the ECM, the EC ... 1993 Dodge Dakota

My turn right turn signal stays solid till i pull the turn signal forward towards me and hold it thats the only way it will flash and my brakelight wont work on the right side either tried changing the brake light bulb and it still wont work

May be the contacts in the switch, the brake lights and turn signals use the same circut on many vehicles ... 1989 Chevrolet Corsica

If my dash lights, running lights and tail lights aren't working, and my headlights are dim and only getting 1 watt of power. The combo switch (headlights, running lights, turn signals) is working, the relay is clicking, but the running light wires are not getting power coming out out of the relay. Also the radio sometimes doesn't work and either turning the ignition on and off or just turning the key while the car was running would make it come back on. Is there any possibly way it could be

Sounds like you have a short or perhaps a bad ground wire. Can you check the current at the relay socket? That would tell you if the short is after the relay or before it. ... 1983 Nissan 280ZX

Here's the problem with this 04 XJ8. The high beams will light up but they won't stay on unless you continue to hold the the switch. The low beams work fine until you turn the right turn signal on then they go out completely, till you return the turn signal to off. I don't even know where to start. I did check all the fuses and the checked out. Thanks for listening, Jim PS the fog lights will not come on.

Renew the light stalk switch ... 2004 Jaguar X-Type

2001 Dodge Dakota. When I turn on my right turn signal the four way flashers come on. The left turn signal works fine.

... Cars & Trucks

Dome light mysteriously comes on. Only driver side window and door lock work. Left turn signal used to stay on even after ignition was turne off, but now it works. Some short caused gas gauge to flip all the way over to the post and wont come back.

Shorts in the system are hard to locate, especially when they run into other areas not related to each other. you most likely have a burnt wire that has melted into others. This takes alot of time to find in most cases. Some times you luck out. some ... 1998 Buick Park Avenue

I have a 1997 Buick Century the headlights wont come on when i turn them on. If i pull the dimmer switch back to put on high beams the high beams will come on if i hold the lever back when i release the lever they go out. the running light and turn signals work. I replaced the headlamp switch in the dash and they worked for a couple days and now they are out again.

... 1996 Buick Century

2012 Ford Escape flasher location? I have a new trailer tow hitch, factory installed. Used utility trailer for first time today. Turn signals going too fast. Indicates I have the stock flasher and not the heavy duty one. Emergency flasher is fine. I spent way too much time searching for turn signal flasher. The sound comes from digital source, back of instrument panel. Any ideas where actual flasher unit is located? I already have the new heavy duty unit, so know what I'm looking for. Appreciat

... Cars & Trucks

When i pull the knob for my lights they dont come on i have to hold and continue to hold the turn signal switch to turn the brights on.

It sounds like the contacts are worn you need to replace or repair the switch. ... Buick Century

I have a 1996 oldsmobile cutlass supreme sl and my turn signals left and right only work when i kinds hold the turn signal stick on the BRIGHTS position and my two tail lights wont come on unless i do the same thing please help me i need it fixed!!!!!!!!!!!!!!

Replace the switch ... 1996 Oldsmobile Cutlass Supreme Coupe

1977 trans am 4 ways and turn signals dont work the little green arrows dont even come on but when i push the breaks both little green arrows come on at the same time checked bulbs ok fuses ok but cant tell wich one is turn sig.

The signal flasher will be a tube about 1 inch long usually round and cylindrical it will have either 2 or three pins on it. There will be two of them and they will both be located jsut about the fuse box. swap them onis is the four way flasher one ... Pontiac Trans

I have a Saturn SL 1998 Man.Trans. When the car is cold, I walk out to start it and the car cranks right up, I notice the temperature gauge goes straight to half way point and the coolant fan immediately comes on also. I drive the Saturn and as it warms up the temperature gauge goes all the way down to cold and at this point if I turn the car off, it will not crank unless I hold the gas pedal to the floor and just keep turning it over and over finally it will catch fire and start. If the car si

There is a sensor its the ects sensor. Its in between the EGR valve and the upper radiator hose on your car. I just changed mine two days ago. And it fixed my problem. My car was doing the same exact thing yours is. The temp. gauge in your car should ... 1998 Saturn SL

When using the right turn signal the 4 ways come on. The left turn signal works fine. Also the left brake light does not work and the bulb has been replaced.

Could be a ground problem or worse than that it probably is your turn sig. switch ... 2001 Dodge Dakota
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.2257 seconds