Having problems with your 1992 Jeep Cherokee Sport ?

License plate bulb wiring color

\015 New bulb won't come on and fuse is good\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

TAKE THE BULB OUT & TURN IT AROUN AS THEY ARE POLARIZED & ONLY WORK ONE WAY
Repair Help & Product Troubleshooting for 1992 Jeep Cherokee Sport

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

License plate bulb wiring color


TAKE THE BULB OUT & TURN IT AROUN AS THEY ARE POLARIZED & ONLY WORK ONE WAY ... 1992 Jeep Cherokee Sport

I have a license plate holder with light that I bought from a third party. I do not have a back bumper so I am using the existing lights wire to hook to the new license plate light. here is the problem: the truck has two wires going to the bulb, I only have one wire coming from this new light. I am assuming that the two wires are a positive from the battery and wire to the switch, can I tie these two together on the one line? or do I only require the positive wire? need assistance.


I would get a voltmeter, hold the black ground wire to the chassis, turn on the lights and touch the red hot wire from the voltmeter briefly to each one of your wires. which ever one of them gives you 12 volts is the one to attach to your new light u ... 1995 Nissan Pickup

1999 RX300 The tail lights do not work. Bulbs and fuse fine. Side marker lights and license plate lights work. When I connect a +12 volt wire to the green tail light wire behind the rear quarter panel, the tail lights come on as well as the marker and license plate lights. HELP


... 1999 Lexus RX 300

License plate lights not working on 2003 Ford windstar. I have replaced bulbs and fuse with no results. I have remove trim molding from right side of door pillar to check wiring. Cannot see any cracks or breaks in wiring and ground wire looks good and is tight against frame. All other lights running on same fuse as license plat lights are working.


... 2002 Ford Windstar Cargo

My 2002 Hyundai Accent GS hatchback has wire color coding different than Haynes' manual shows. The wires going into the hatch are: 2 thick black wires going to the window defogger A blue wire with an orange stripe, an orange wire and a gray wire, all going to the wiper motor, which also has a black grounding wire going to a bolt at the base of the wiper motor mount. A green wire going to the license plate lamps A gray wire with a black stripe, going to an unused plastic two-contac


I may be able to figure it out but with the haynes not showing the codes which they will usually show the options for all models,I am not sure but will try.If you have a more basic model,not "loaded",the gray/black wire could be for a more loaded mod ... Hyundai Accent

Can I attach a generic neon license plate cover to the wires to the License Plate bulbs without causing a short?


Yes you can. Just make you put heat shrink where you spliced in so as not to create a bad connection after time. ... 1993 Plymouth Voyager

Replacing old license plate light. Wire was broken also. Which color wire do I hook the new one to? I know I have to use a wire to rear lights but which one is it?


You are looking for a green/white wire(+) and the blck is the (-) to be sure get a test light and clip to a good groung=d on the body and turn your parking lights on then probe the wire making sure it turns on and of with the switch(use a helper) ... 1986 Dodge Pickup 4WD

How to change a license plate bulb on a 98 cavalier? I have pulled the wire out but the bulb would not turn or come out.


You must push in, turn, and then pull out. Many get stuck or rusted and you will need pliers or needle nose to remove ... 1996 Chevrolet Cavalier

Parking lights on Nissan Frontier on - trailer parking not. 4 pin connector to factory connector (after market sealed wiring) - brake and turn signals work - no power to "brown" wire at factory connector fitting - I tried hooking brown to license plate bulb but then brake lights stayed on. Any thoughts?


First check the fuses. There may be one for trailer running lights. Check also power at the harness. If the brake lights and turn signals are seperate, there has to be a converter from 5 to 4 wire. For the power to feed back to the brake lights it so ... 2005 Nissan Pathfinder

2002 XG 350. License plate bulb out. How do I pull bulb, wiring is too tight. Thanks Joe B


2002 HYUNDIA XL 350, LIC. PLATE BLUBS CAN NOT GET ASSEMBLY DOWN TO REPLACE BLUBS, DUE TO THE FACT THE WIRES ARE TOO SHORT TO PULL UNIT DOWN. ANYH IDEAS? ... 2002 Hyundai XG350

How do I replace the rear license plate light on a 2004 Pontiac grand am? The light bulb doesn't seem to be removable. I've removed the covering, but the silvery colored bulb appears to be stationary in the socket.


How do I replace the rear license plate light on a 2004 ... 2004 Pontiac Grand Am

2001 suburbans driver side taillight and license plate light are out, its not the bulb and the wiring that is visible is fine. I have the lights for my trailers hooked into that light and that wiring is clean as well. could there be a ground issue somewhere?


... 2001 Chevrolet Suburban

Need the wiring color diagram for a 1991 Suzuki Sidekick at the headlight plugs. i'm trying to wire in 100/80 Heliolite bulbs and yes I know they are off road only bulbs. i have the relays and a fuse and wiring to do the job but I'm unsure of the wires at the bulbs. (groundhigh and low beam) colors?


Should be three wires one ground one power for low beam one power for high beams\015\012\015\012unplug connector\015\012take a test light (if dont own one buy one there real cheap and useful) clamp test light to good ground turn on ... Cars & Trucks

What color is license plate light wire? - 1989 Ford F 150


Mainly white or black sometimes yellow ,,,with the use of a test light work the switch to determine running lights ....also this will help you same some money if you start blowing fuses ......... ... 1989 Ford F 150

No lights on my license plate, bulb is replaced , no output on connectors . can you tell where are they connected so i can put new wires.


You need to follow the wires back to a connector\015\012& do some testing for voltage and ground\015\012\015\012I don't know why you talk about needing new wires,\015\012they last the life of the vheicle 20 years or more. ... 2000 Dodge Durango

Need wiring schematic for lighting on 2008 Aveo - both license plate lights are out and dome light is out - alll bulbs and fuses look good


... 2008 Chevrolet Aveo5

My 91 GT's tail lamps and license plate lamps wont come on. Also, the instrument cluster doesn't illuminate. Don't think it's a bulb, considering these are all tied to the same fuse, but the fuse is good. Could this be a grounding issue? If so, where should I look for the ground wire at?


Check for voltage between battery Neg. and both sides of your fuse, if you get battery volts then its a ground issue, if 0 volts then its a power supply problem.\015\012if you have a ground issue you battery Neg. cable goes from the battery to ... 1991 Ford Mustang

My tail lights, license plate lights, and inside stereo lights are continually going out. My mechanic has replaced the fuses; removed all parking lights and headlt assemblies and cleaned bulb sockets, wiring and connections. No specific problem was found. The longest they have stayed on was two weeks. Someone please help me. I have already spent $275 and now the dealer has it so you know what that means :-(


... 2004 Nissan Maxima

Lost lights Lost my tail lights, parking lights, license plate lights and dash lights. Checked fuses, wiring and bulbs. Not sure where else to check. Factory radio still intalled. Signals, brakes and hazzard lights still work. Questioning the switch on the dash now...not sure how to take it off to check it though.


Hi as you have checked all fuses for these light ok? and other lights are all working may i suggest you check the relay for side/tail lights which also includes licence plate light first it sound like the relay has failed if you look u ... 2003 Ford Focus

Wiring connection for license plate light bulb


... 2004 GMC Envoy

License plate light wires


Well if you can see that you have 2 black wires on No plate light and you can see the rear lights then get a test light and turn on the parking lights with test lighttest light to earth and the point stick into wires on rear light till it lights then ... 1996 Chevrolet Blazer

I need to replace my license plate light wire


... 2007 Kia Sportage LX 4x2 A/T

2007 Pontiac G6. Rear license plate bulb socket dead


Park lamp and license plate share same fuse.check park lamp fuse.if fuse good you have ground wire problems. ... 2007 Pontiac G6 GT Convertible

Wires disconnected for license plate light on 1994 gmc sierra


There should be a pigtail connector for trucks with or without rear bumpers. Did you look in the harness for a brown wire ?Same as the marker lights. ... GMC C1500

Need to change rear bumper license plate bulbs in a 1991 F-250


Push the light from inside your bumper to the outside. May have to tap with a hammer or wrench. New light will push in from the outside toward the inside. Reconnect the wire and you should be up and running! ... 1991 Ford F250
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2868 seconds