Having problems with your 1991 Volvo 240 ?

No clutch my clutch failed on my 77 245 volvo.where is themaster cylinder located so i can troubleshoot?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

You have a clutch cable on that model!
Repair Help & Product Troubleshooting for 1991 Volvo 240

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No clutch my clutch failed on my 77 245 volvo.where is themaster cylinder located so i can troubleshoot?

You have a clutch cable on that model! ... 1991 Volvo 240

My clutch doesn't always disengage when the peddle is on the floor and when starting out in first bolts ahead as though the clutch was already part way out. I took it to a shop and they said my clutch master cylinder was going and quoted me an outrageous price. I found one for $75 but I want to know what I should be looking out for. Are there lines that need to be bled, like with brake master cylinders? |And where is the master cylinder located? Is it on the firewall near the clutch?

Your clutch master cylinder is right beside your brake master cylinder. I would advise you to replace the master cylinder and the slave cylinder together. The slave cylinder is on the side of the transmission. The slave cylinder does have a bleeder s ... 1991 Toyota Celica

Where is the slave cylinder located for an 03 sunfire and is it possible to just change the master clutch cylinder instead of both the slave and master clutch cylinders to solve the no pressure issue?

... 2003 Pontiac Sunfire

Hi1 I got a Uno 1100 panelvan my clutchs keeps failing, I did replace the clutch cylinder and master cylinder. still no luck what can i do to fix problem any help is welcome

... Fiat UNO

On my 2001 KIA Spectra the clutch won't fully release. It acts like the pressure plate is still partially engaged. The car wants to pull when the clutch pedal is fully depressed. Is this a failed pressure plate or a failed hydraulic slave cylinder?

Could just be low on cluch fluid or you may have to bleed the air out of the slave cylinder ... 2001 Kia Spectra

Need schematic for a340h xfercase valve body specifically checkball locations. no gear ranges available in 2 or 4 hi. r l 2 3 all ok in 4 lo. replaced direct clutch in tcase and all o rings and seals. checked bushing on back of direct clutch support(spindle) air tested fine. suspect failed valve body (leak or stuck check ball) need a schematic with ball locations and fluid routing.

... 1990 Toyota 4Runner

My clutch is slipping on my 1994 toyota pickup, I think the slave cylinder might need to be bled, but there could be other problems. where is the slave cylinder located, and what are other possible problems that leads to the clutch slipping

... 1994 Toyota Pickup

Where is clutch master cylinder located in 1997 Acura CL

... Cars & Trucks

The code I have is P0306 Cylinder 6 misfire detected and I want to try to locate which cylinder is the sixth cylinder to troubleshoot. This is on a 2004 Jeep Liberty 3.7L

Having the same problem with my 2004 Liberty. The 6th cylinder is the farthest one from the front on the passenger side of the engine. I have a loud knock associated with the misfire and can't figure it out...have changed the plugs and the coil on t ... Jeep Liberty

My clutch grinds when I shift into gears . I thought my clutch was bad until n I was told to check clutch slave cylinder fluid but I don't know where that reservoir is located. Can anyone help?

... 1996 Nissan 200SX

Location of 1996 rav4 clutch master cylinder

... 1996 Toyota RAV4

Clutch slave cylinder location

... 1990 Subaru Legacy

Location of clutch slave cylinder 2000 toyota echo

... 2000 Toyota ECHO

I have 06 mazda6 clutch stays on the floor have to pull it up with mu foot. o located the master but where is the slave cylinder located to replace it.

... Cars & Trucks

Troubleshooting 85 Pontiac Trans am put new clutch kit and slave cylinder and I still have no clutch

... Cars & Trucks

My 1993 Jeep Cherokee sport's clutch master cylinder keeps failing in less than a year of use. What could be causing it to fail so frequently?

... Cars & Trucks

Where is the clutch cylinder on the 2004 santa fe located? The clutch is not disengaging completely when pedal is pushed all the way down and feels like it is in need of fluid or adjustment.

On the gear box.Ask somebody to help you. ... 2004 Hyundai Santa Fe

Leaking clutch fluid but we can't see from where. Master cylinder looks ok. Is the slave located in the clutch housing? Could it be leaking in there? We have to top up and bleed every 3-4 weeks even when it's not used. Mike in Costa Rica

Yes its down by the bell housing. Yes it could very well be leaking there. Might be worn seals on the actuator as well. Easy to replace at least. Are you feeling a sloppy pedal or limited travel on the clutch? ... 1993 Isuzu Rodeo

Power brakes failed suddenly on my 53 rocket 88 olds. Where is master cylinder located and what might have caused the brakes to fail so quickly?

The master cylinder is under the drivers floorboard. you can find it under the car by following the brake pedals linkage. These cars have only one ( circuit) for all four wheels. Any wheel cyclinder or brake line can fail anywhere and all the brak ... Oldsmobile 88

Where is the slave cylinder for the clutch located. internal or externaly.

First thing to do is to see if you have a clutch slave cylinder or cable operated clutch. Second the slave cylinder is on the end of the lever that goes into the clutch housing Before you change the clutch make sure that the problem is not in the sla ... 1998 Dodge Avenger

Clutch slave cylinder location

... Kia Cars & Trucks

Clutch problem,where is the slave cylinder located

The clutch slave cylinder is located on the left side of the transmission, but i believe that the slave cylinder may come with the master cylinder and lines already attached ... 1996 Dodge Ram 1500 Club Cab

Where is the clutch slave cylinder located

... 1999 Mitsubishi Eclipse Spyder GS-T

2002 honda passport clutch master cylinder reservoir, where is located??

Use brake fluid to refill it. ... 2002 Honda Passport

I Have a 2000 2L forester. The clutch pedal seems to have lost pressure at the top and is failing to return on its own at times. Have replaced master and slave cylinders any ideas on where I go next p

Did you bleed the system? ... Subaru Forester
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.1067 seconds