Having problems with your 1991 Toyota 4Runner ?

I have a 95 4runner 3.0 ltr I had code 52 which i know is the knock sensor I since have replaced the sensor and the harness. It idles good but hesitates under throttle and i still get code 52. Is disconnecting the battery enough to erase the code ? i have pulled the fuse as well.

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 1991 Toyota 4Runner

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a 95 4runner 3.0 ltr I had code 52 which i know is the knock sensor I since have replaced the sensor and the harness. It idles good but hesitates under throttle and i still get code 52. Is disconnecting the battery enough to erase the code ? i have pulled the fuse as well.


... 1991 Toyota 4Runner

I was driving and my car died and wont restart. long cranks but wont turn over. I changed the battery still no start.I checked faults codes and got p0340. I changed the cam sensor and code went away. I checked codes again and got p0522. changed oil and oil pressure sensor and car still wont start. I disconnected the battery 1 hr to reset pcm. still getting p0522 how can i get the engine to build pressure for the sensor if the car wont start.


... 2003 Chrysler PT Cruiser

I am having trouble with p2112 p2104 and p0452 codes already replaced all kinds of things including throttle body motor and tps. I cant get the engine to learn idle quality even after erasing the codes and disconnecting the battery. It idles very rough and will not climb above 2000 rpms already replaced fuel pump vapor management valve 2 different hoses plugs cleaned Mac sensor etc only these 3 codes left and still won't idle.


.Go to OBD2 code P2104 P21122 , look for 2004 Lincoln LS . ASE certified fellow will most likely bring you step by step to your problem. My understanding is that the problem occurs because of a small SHORT. So before you start changing parts check on ... 2006 Ford Explorer

I have P2106 code. I did replace the throttle body which comes with new sensor and motor. I did turn off both cables from the battery for a day. I did use the scanner to erase the code. I did drive afterwards for 200 miles. Still getting the same code and check engine and the wrench? 0PLEASE HELP, I'M OUT OF IDEAS.


There is a tech bulletin from ford on this code.You did the correct repair, but also the pcm has to be reprogrammed from the dealer ,which is also known as flashing the pcm:) ... 2004 Ford F150

1994 Cadillac Seville is draining the battery. Pulled the modular fuse and Radio fuse and still getting a drain on the battery. Disconnected the altenator and still getting a drain on the battery. What could be causing this drain on the battery?


Check the cells on the battery, if they are dry or not full of water then they can go bad. That would incorporate the battery to keep dying. When you start the car it feeds off the alternator, and then starts to die.Check your char ... 2000 Cadillac Seville

I have a 2001 GMC Yukon. A p1258 code came up we replaced the ECT sensor disconnected the battery the truck still will not start. Any ideas how ti get the injectors to turn back on.


If the injectors have voltage, and no ground pulse, the computer is not getting a signal from the crank or cam sensors, or something has happened to the computer itself.Do you have spark at the plugs ? ... Cars & Trucks

Radio screen show off, tried to reset by disconnecting battery and pulling fuse and still displays off in screen, how to get back to code screen


... 2001 Volvo S40

The sensor in my 2006 Cobalt key FOB is going crazy. I checked the fuse which is fine, I changed the battery in the FOB. Still I push on the FOB ever until the inside light comes on then I can enter the car before the alarm goes off. If I do not get out of the car as soon as I turn it off, the alarm will go off. I cannot afford the dealer, can I disconnect the whole thing?


Does it have a little laser light bulb looking thing in the front of the remote that you can clean? And are you absolutely sure you put a good battery in it?\015\012You also may have gotten something down inside under the button. Can you take i ... 2006 Chevrolet Cobalt

95 accord was in accident insurance totaled car we bought it back. Air bags deployed so I replaced them with ones from junk yard also replaced control unit. Disconnected battery replaced couple of fuses car runs great still.... But srs light blinks a code 52 and is on constantly also check engine light is constantly on but it goes out when headlights r turned on. Now I don't think it will pass registration requirement from DMV. Can I bypass srs system to get light to go out? Need reg. ASAP on ca


Leave lights on to pass test ... 1995 Honda Accord

1993 Jeep Grand Cherokee 8 cylinder, My "check engine" Light wont come on. Truck runs, then shuts down. I try to check the codes, Turn on, turn off, on, off, on. I get nothing. No check engine light at all. After I disconnect the battery for awhile, It starts' right up. When I check the codes again, all the comes up is code 12, (Battery disconnected from PCM within last 50 starts). Will a "Crank-Sensor" work, then not, then work again? Could that make the "check engine" light not come on? The


A failing crank sensor sometimes won't set a code, but it will not prevent the check engine light from coming on.I'd test it with an ohmeter both hot and cold just to make sure it's good, but think your problem is likely to be a connection betw ... 1993 Jeep Grand Cherokee

I have installed a used engine in my 2002 PT Cruiser non-turbo. The engine was running properly before it was removed from the wreck, same year and model. Now it will not start. Through the codes in the car, I have isolated the situation down to the crankshaft position sensor. The ASD is not getting a reference signal from the CKP sensor (code 0320). I reset the codes by disconnecting the negative side of the battery, and the code repeated. I changed the sensor with the one from the seiz


Most chrysler products you have to re sync the cam and crank sensors using a scan tool such as Snap-on's modis. you may have to also have the cars computer specs re programmed for the replacement motor adn that can only be done at a dealership. ... 2004 Chrysler PT Cruiser

Throttle position sensor codes come on my ford focus 2010, i changed the throttle sensor but still get the codes could it be the foot pedal switch itself


... 2010 Ford Focus 2.0

Truck was running rough, threw a code 44. new o2 sensor, cleaned throttle body, new plugs and wires. checked fuel filter. found and repaired a major vacumn leak. it still ran rough and now threw a new code 34. i replaced the maf sensor and now it wont even stay running long enough to shift out of park. if i can get it on the road i can smell the fuel its dumping into the throttle body and it wants to doe as i press gas pedal. it also wants to die as i press the brake pedal. its like it doesnt se


Glad you got it fixed. Chasing a problem can be very frustrating. ... 1995 GMC Sierra C1500

I disconnected the battery and when I went to turn on the radio a code came up. I did not know what this ment so I was just started pushing buttons. 3error came up. I then had my son disconnect the battery again and a 5 error came up. I do have the code now but can not get it to erase the error message. Manual said to run the radio on on for 1hr.Did that and the error message still there. Went to a Honda dealer where I bought the car and they did not know how to fix it. Please help going crazy w


Disconnect the negative terminal of the battery for 3 minutes, and try again. The error message shouldnt be on when you insert the radio code, it wont work. I sure hope that the battery inside the radio didnt die, because it wont be able to retain th ... 2005 Honda Civic

The fans run constantly and keep draining my battery. Is there a sensor or relay that could be out? I've disconnected the fans, and it still drains the battery. I've resorted to disconnecting the battery just so that I can make it to and from work. That's getting old. This is the first problem I've ever had with this car that left me stranded. I just want to fix it.


... 1996 Volkswagen GTI

2004 Nissan 350z loss of power and service engine soon light stuck on,probably shouldn't of disconnected pos first on battery over winter,two codes come up p2128 throttle pedal position sensor switch "E" circuit high input and p2138 throttle pedal position sensor switch D/E voltage correlation. Can I reset this some how or could one or both of those sensors be faulty?


... Cars & Trucks

'i' have a 1998 jeep grand cherokee and it keeps backfiring and running like ****...I had a code po720 but changed the output sensor and the transmission sensor changed the throttle sensor and still same problem ...only now I dont get any codes...anyone know what to do to fix this problem short of sending it to the scrap yard....


... 2000 Jeep Grand Cherokee

Codes po 101 and 102 come up for my 09 chevy cobalt lt 2.2 , i recently put a new air filter in ,after that about a week check engine light came on and those two codes popped up , the car once started up jumps high and low rpm untill eventually stalls , i just took the maf sensor out and cleaned it , disconnected battery and still came up same codes , could it be a bad sensor ? Car only has 45000 miles on it


... 2009 Chevrolet Cobalt

Code for camshaft sensor & crankshaft sensor came up changed both sensors but still getting same readings even after disconnecting negative post & resetting code reader &check engine light wont go off either


Your old sensor weren't bad at first, u might have a bad connection, check connection and clean connections with contact cleaner ... 2002 Dodge Intrepid

Code P0340, camshaft position sensor. Changed the sensor still wont start. Changed the crankshaft sensor next and get the same code and no start. Can someone please tell me if their is an in line fuse with this circuit? Dont know where else to look.


... 2006 Chrysler PT Cruiser

I have a 2005 taurus with the 3.0 v6. I am experiencing a noticeable miss have already replaced the coil and the plugs. Also getting an o2 code on bank 2 sensor 1, replaced first one back on passenger side with a Bosch o2 still getting code. I have unplugged battery to clear codes they come back.


O2 sensor will cause this because its controling the mixture,have you got the wires right on teh sensor because in the box with the sensor is a leaflet explaining the colours of the wires that have to be connected to what colour ... 2005 Ford Taurus

I have a 2000 dodge neon es im getting intermitent spark. i have replaced cam sensor crank sensor cam triger magnet asd relay pos cable to fuse box coil pack and pcm and still getting intermittent spark checkt all grounds timing belt and timing checkt out ok. no fault codes are present cam crank and coil pack have 12v


The PCM contains the ignition control module, this may be the problem, a dealer can test on a special live data scanner and give you a 100% certain answer, they can watch the signals from the crank and cam senso ... Dodge Neon

I'm getting an intermitent code P1389 on my 2002 Dodge Dakota Manul Transmition 3.9 engine. the truck was running great when I shut it down. When I went to start it back up it would turn over but not start. I erased the code with my OBD II tester and still wouldn't start. I disconnected the Neg battery term. and tried to start 10 times. I reconnected the battery term and then started right up and run great. This has happened several times now and the reader says it's the ASD relay low voltage.


... Dodge Dakota

I have a 1984 Cadillac Eldorado Biarritz. the service soon light is on so I took it to aamco. they said the throttle swith was the cause for the light (the throttle switch is in the Idle speed control motor) I replaced the ISCmotor but the light is still on. Is there some kind of reset procedure? I disconnected the battery for about 10 minutes but it's still on. I need to get the car smogged asap!


Hello: The ISC motor should be adjusted. The part that screws into the larger shaft coming out of the motor should be approximately 17 mm. The code does not have to be cleared for the light to go away. You should collapse the I ... 1984 Cadillac Eldorado

1998 4runner v6. Last year I replaced #1 fuel injector, new plugs & wires. Now I am getting check engine light. Autozone read codes as follows: P0300, P0301, P0303, and P0304. I cleaned the MAF sensor and made sure the wire was still there. Reconnected neg battery cable. Still getting check engine light. Any thoughts? Coil pack? Another injector problem? Thanks.


... 1998 Toyota 4Runner
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.0110 seconds