Having problems with your 1991 Plymouth Acclaim ?
No turn signals and lose brake lights when turn signal is used.
\015 I have problem with no turn signals and brake lights go out when turn signal is engaged.all bulbs, fuses and relay are good.\015
You need to replace the multifuction swicth (turn singnal swicth) that controll all of that stuff i have replaced many of them for that problem hope that this helps you
Repair Help & Product Troubleshooting for 1991 Plymouth Acclaim
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
No turn signals and lose brake lights when turn signal is used.
You need to replace the multifuction swicth (turn singnal swicth) that controll all of that stuff i have replaced many of them for that problem hope that this helps you ... 1991 Plymouth Acclaim
Try to hook tail,brake,turn lights up on flat bed truck but brake and turn will not work right both blink when turn signal is turn on. Can they be hooked up to a tail,signal,bake light set? if so how and whats my problem if hook turn to light by themself with brake and tail lights hooked to different light set works fine would like to just use one light set if can if not then guess will have to use two wire color green red dots green yellow stripe red dots green white stripe red dots other wire
... Toyota Pickup
Brake lights My brake lights wont work when i use my turn signal. but if i dont use my true signal my brakes work,so i have to drive without using my turn signals
The switch in the steering column is broken. you will need to replace it. the contacts are separating when signal arm is moved. ... 1997 Oldsmobile Cutlass Supreme
1996 Olds Cutlass Supreme Sedan: Left and right brake lights are intermittent. Both of the turn signals and emergency flashers work. Sometimes, both brake lights work until I use turn signal. Then opposite brake light goes off. The high stop light always works okay. I've tried to fix using the emergency flashers on and off several times, as suggested by another web-help Q&A. --**** H.
... 1986 Oldsmobile Cutlass Supreme
Short in the brake lights and turn signals, no turn signals or hazard lights even on dash, and when i turn on turn signals or hazard lights, i lose brake lights.
Check and replace the multifunction switch ... 1998 Ford F150 Regular Cab
I have a 2000 pontiac grand prix gtp that i just had a new altenator put on because i was told there was a short that was causing my lights interior and exterior to flicker now that the new one is in when i use the brake all the lights interior and exterior come on and when i use the left turn signal only all the lights blink with the turn signal inside and out and when i actually turn my headlights on the left turn signal doesnt work just stays lite up no blinking WHAT THE HECK DOES THIS MEAN?
... 2002 Pontiac Grand Prix
When i step on the brakes or use the left turn signal, all the running lights come on. I replaced the turn signal switch and removed the trailer wiring hookup. I unplugged the brake switch and it still does it when you use the left turn signal. The right turn signal works fine. Do I have to stop making left turns?
Yes, you do unless you fix that botched wiring job. The left turn wire must be connected to the running lights wire in the back. Actually it could just be the wrong bulb or a socket that is shorted across the terminals. Try taking the left rear bu ... 1992 Jeep Wrangler
2000 Mercury Marquis lighting problem.No brake lights,except one in back window is working,no headlights,dashlights,turn signals or flashers. Replaced LCM with used one,don't know if it's a good one but brake lights work now. Still no headlights,turn signals light but don't flash, flashers work but real fast and erratic, and no dash lights. Did I get a bad module or do I have other problems.Anyone have diagrams?
All these functions are controlled by the LCM, this module is unique to each cars paticuliar accessory package, u may have the wrong one or like u said it is defective, the module can be self tested for proper function by a ... Mercury Grand Marquis
I have a 1992 Chevrolet Corsica LT. I'm having trouble with the turn signal's. I've checked every bulb, socket, and ground wire. I've replaced the fuse, flasher and the turn signal switch. All the other light's work fine including the parking light's, brake light's, and 4 way flasher's. The turn signal's still don't work, not even the light's in the arrow's in the dash don't work for the signal's but DO work for the 4 way flasher's. I could really use some help here.
DID YOU REPLACE THE BULBS ... 1992 Chevrolet Corsica
My brake lights do not work when I press the brake pedal. They also do not work, when I turn on the hazard switch. They do not work when I use the turn signals, either. They do work, when the headlight switch is used. I know it is the rear lights only, because the front lights work just fine on the above mentioned problems. Any ideas?
It is a duel eliment light bulb probably, like a 1157 , replace bulbs or at least remove bulbs and check for burnt eliments... you can also check with a ohm meter... ... 2006 Ford Freestar
2002 Nissan altima left brake light not working. Also when left turn signal is on my reverse lights flash too. If I apply brake during this the turn signal blinks faster and I lose trans light in dash. Any ideas?
... Nissan Altima
On my 1998 Windstar, when I press on the brake pedal, my left turn signal comes on (dimly). If I am using that signal, it stops flashing and goes dim until I take my foot off the brakes. The right turn signal behaves normally. I had changed the signal switch assembly for a different problem, but it did not affect this malfunction. This only seems to happen during cooler weather. I have not yet been able to find where the left signal and brake light are grounded, so I don't know if this coul
Could be a bad earth unscrew light and check bulb contacts are clean your earth is against the body work when you tighten your light assembly so make sure its clean ... 1998 Ford Windstar
Trailer Connections I have to mount a European Trailer Receptacle to my existing American Trailer Recptacle on. The turn signal/blinker and brake lights are 3 seperate wire circuits for all european trailers. How do I seperate the circuits so the brake lights and turn signals don't come on at the same time? Here is how the 7 Pin European receptacle needs to be wired. 1. L/H Turn 2. Fog 3. Ground 4. R/H Turn 5. R/H Tail 6. Brake (L/H & R/H Sides) 7. L/H Tail Use this diagram for wiring camping tr
I took the vehicle to Bosch, an electrical expert in Germany. ... 1997 Ford F150 Regular Cab
I have a '95 Oldsmobile Achieva S and my turn signals and tail lights went out. if i hold down the brakes and try to use the turn signals, the corresponding brake light goes out. I have tried replacing all of the bulbs, replaced the flasher, and checked all wires. I cant figure it out
... 1995 Oldsmobile Achieva
My 87 ford rangers brake lights will not go out unless i unhook the turn signal switch. I thought it was the brake light switch but i unpluged it and they stayed on so i tested it and shows to be good so i thought maybe it was the turn signal switch so i found two used ones, one i know should be good the other not sure about, but got the same results out of all three switchs. Even tried pulling fuses and nothing else will kill them. NEED HELP! I would like to get it back on the road. What in the
You must have some wires shorted together somewhere ... 1987 Ford Ranger
My 1996 buick regal brake lights wont work when i press them only the small window light gos on and when i press my emergencie flashers will only work in front side i can still use my turning signals and my back up lights but no matter what i looked at my fuses my bulbs even my wireing using a light buld tester nothing makes since at all about why my brake lights arnt working except for the tiny window stop light ??? if anyone has a idea plz let me know im not satisfied with having a mechanic lo
If all the fuses are good check the wiring harness at the back check if there,s a power coming out on it, you can use a tester for the continuity of the power output, or you can also use a test bulb to check them all. if it not working then the prob ... 1996 Buick Regal Olympic Gold
1997 Sunfire GT. Right, left, and spoiler brake lights not working. Rear left and right turn signals not working either. Both front turn signals work, but they blink quickly as if a bulb were out. Headlamps both extremely dim, and I only have use of Parking lights when driving. I first inspected the fuses on the inside console. They looked to be ok, looked at bulbs, the filaments seem to be ok, but grease where the bulb is plugged in is dried up and hardened. I replaced the turn signal switch
Replace the turn signal switch. All of these lights run threw it. ... Pontiac Sunfire
I have a 2007 Shelby GT500, when I use the turn signals only 2 bulbs blink on each side, the 2 outer most. The inner lights seem to only work as running lights, they do not light as brake lights either. Is this correct? I want to add sequential turn signals and cannot figure out how they'd work since the inner most lights are not blinking.
... 2007 Ford Shelby GT 500 Convertible New Cars
I have no running light(night lights)on the left front or left rear..iv change the bulbs the fuse and they still wont work..the rear light comes on when i aply the brake and the turn signal comes on in the front when i use the turn signal but the night running light will not come on..right side ones work fine no problem there..please help
... 1996 Volkswagen Jetta
The tail lights dont work at all, the brake lights and turn signals dont work when the front lights are on. when i use the turn signal they both flash like the hazards do. any help
Check your fuses first. Your brake light switch could be bad and your flasher.. Good Luck!!!! ... 1993 Ford F150 SuperCab
I have a 2000 Amigo Isuzu and no rear lights or interior lights. I have brake and turn lights when I brake or use the turn signals. Help!
Have you checked the fuses under the dashboard, stupid question! but you can visally see if there burnt out holding them up against light, if not change the bulbs!\015\012hope this helps ! ... 2000 Isuzu Amigo
I have no tail lights or dash lights. I DO have head lights, turn signals, and brake lights. when i use my key pad to lock the doors all the lights flash including the lights the wont come on while the van is running. The lights DON'T come on when i turn the head light switch on. My daytime running park lights come on during the day and the automatic heads lights come on when it starts to get dark . The park lights and headlights DON'T come on together. I have already tried replacing ALL the b
Typically this is caused by a bad dimmer switch or a connection at the plug to the dimmer switch. ... 1998 Oldsmobile Silhouette
2003 passat 1.8t, GL My left brake light wasn't getting brighter when I braked for a while, replaced the bulb and no luck. I replaced the bulb housing and it still wasnt working properly until I took the old bulb out and tested it using a bulb from the right tail light. I had a lot of bulbs next to me and wasnt paying attention when I put a turn signal bulb in the brake light socket and it instantly cut off my right tail lights. Tried resetting them and tried switching the fuse. Any idea?
... 2003 Volkswagen Passat
Tail lights work my turn signals used to work and my brake lights dont work!!! What do i do??
... 1988 Ford Bronco II
1997 monte carlo left brake light doesn't work and when the headlights are on the left signal light doesnt turn on but still flashes when u use the turn signal
Broken ground on that set of lights or the bulb is bad there are two elements in those bulbs for two separate lights. ... 1997 Chevrolet Monte Carlo