Having problems with your 1991 Buick Century ?

Will a 1991 Buick Century 3.3 transmission replace a 1994 3.1 Buick Century transmission?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Should be the same but look at the pan on the trans should be the same. If the pans are the same and there are the same number of bolts in each pan then you should be fine.
Repair Help & Product Troubleshooting for 1991 Buick Century

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Will a 1991 Buick Century 3.3 transmission replace a 1994 3.1 Buick Century transmission?


Should be the same but look at the pan on the trans should be the same. If the pans are the same and there are the same number of bolts in each pan then you should be fine. ... 1991 Buick Century

Replace transmission of 1995 buick century - 1995 Buick Century


... 1995 Buick Century

2001 Buick Century, had the transmission rebuilt this past summer, it was shifting very hard. Now it is jerking going from 1 st to 2nd, the transmission man says it isn't the transmission but the brain. I borrowed a code meter, and it says there are 2 codes. PO404 EGR flow CKT Range/Perf., and DTC that caused Freeze Flow PO440 Throttle Position.


404 is an EGR code. It will not give you a driveability issue. Most likely you have a bad sensor or a the passage for the EGR is partially clogged.\015\012\015\012440 is an evap purge code. Its possible it could give you a drivability iss ... Buick Century

My 2000 Buick LeSabre whines and will not shift into any forward gears. It also has a very loud whining noise. Car starts fine and I am able to put the car in to reverse. Once I put the car in Drive it goes good for up to 20-mph and then it starts to whine and will not shift into any other forward gear. Same sound and problem when I put the car in position 1, 2, or 3. No problems in reverse. Transmission shop wanted to replace valve body first and then whole transmission, but I can not afford th


It does sound like the transmission has packed it in. you might be able to find a decent used one via a wrecking yard and get a local mechanic to install it.\015\012try to find one out of a car with under 100K miles on it. ... 2000 Buick LeSabre

2001 buick century off trac lite comes on you can feel a vibration and hear a grinding growling noise, i put on computer, it said left front wheel assembly we replaced it but it didnt fix the problem, if you leave the wheel off and put it in drive theres a little vibration at about 45mph?transmission seems to run out good is this a transmission problem or is there something else


Check wires and connector to speed sensor. ... 2001 Buick LeSabre

I have a 1999 ford contour 2,0 lt 4 cyl. the problem I have is with the transmission. the car will not move forward on D from stop. i have to started on 1 and speed up so I can gear up to D. I have been told it could be service by disassemble the gear box, replaced damaged parts and assembled. On 2 is starting to slip. the car is in venezuela and I have been told replacement parts could be found


You will need to have the transaxle rebuilt\015\012\015\012In your case, a remanufactured trans with a warrantee,\015\012may be your best bet,if you have to have it shipped in ... 1999 Ford Contour

I have 2003 Buick Century. Recently I replaced the knob for the power controls on my air conditioner. The old one had been broken for a long time and my temporary fix to it finally wore out. I've noticed that with the new knob I can only use the AC on 3 of the 5 settings. They aren't numbered but I will call them 1-5 lowest-highest. Settings 3 and 5 do not work. 1,2, and 4 work just fine. If I put a bit of downward pressure on the knob, setting 5 will go on while I hold it. I suspect usi


... 2003 Buick Century

How to replace a transmission screen in a 1999n buick century


... Buick Cars & Trucks

2002 Buick Century Transmission Pressure Control Solenoid location replacement


... 2002 Buick Century

Replace transmission on 2001 Buick century - Cars & Trucks


... Cars & Trucks

93 buick century out of 3 coils each coil pack has 1 spark causeing half spark and no start replaced the ignition module and that wasnt the problem. HELP PLEASE


... 1993 Buick Century

89 Buick century 3.3 fuel pressure stays at 35 lb and increases to 45 when giving throttle goes t 50 lb before it dies car will idle forever the car might run for 1 mile or so before it dies. Coil pack and module has been replace airflow sensor has been cleaned tbs sensor is working fine. I pulled off one injector wire to se if the injector was keeping power and car stops could the intake manifold hav a major leak that you cant hear or find


... Cars & Trucks

Do i have to pull transmission on 1999 buick century to replace shift selenoids? the service engine light is on, have had scanned, two shift selenoids.


NO just the side cover. The frame cradle will have to dropped. ... 1998 Buick Century

Buick Century transmission shift sensor has failed. How to replace?


... 2002 Buick Century

I have a dash light out at the transmission selecter on the dashboard and one out in the heater selecter cluster. How do I replace them? The car is a 2001 Buick Century.


It involves removing the panneling. can be tricky since they are snap on and can break while trying to pull off. it might be worth the few bucks to have an specialist do it for you. ... 2001 Buick Century

I HAVE A 1993 BUICK CENTURY WITH THE 3.3 L AND EVERYTIME I COME TO A LIGHT IT STALLS AND IT ALSO WANTS TO DRIVE ABOUT 1 MILE AND LOSES POWER AND CUTS OUT. I REPLACED THE SPARK PLUGS AND WIRES AND FUEL FILTER AND IT STILL DOES THE SAME THING COULD SOMEONE PLEASE HELP THIS IS MY ONLY CAR AND I NEED IT TO RUN BADLY!!


Car wont start! Battery is fine n lights n radio comes on with the door sound as well but it wont make a sound at all or try to start when i turn the key. Anyone have they answer please? Is it my starter? ... 1993 Buick Century

Automatic transmission on my 1996 Buick Century 3.0 eng.3.1 have a filter? Can it be replaced? Can this be my problem? It just stopped with no indication having a problem.


Yes it will have a filter but it most likely is not the problem with the transmission just stopping. A clogged filter will cause it to slip and give other signs indicating a problem before it goes out in general. There are several solenoids in the ... 1996 Buick Century

Can you tell me if a Buick century special 6 cylinder has 2 transmission oil coolers or 1?


IT ONLY HAS I TRANSMISSION OIL COOLER IF THERE IS ANOTHER SET OF LINES GOING TO THE RADIATOR THEN IT ALSO HAS AN ENGINE OIL COOLER ... 1994 Buick Century

I need detailed instructions for replacing my transmission cooler line on my 2000 Buick century custom. I ordered the new line And am picking it up tomorrow morning so if anyone can help me out ASAP that'd super great!


Really, all you have to do is follow the line and disconect it at both ends and any other bracket on the way. ... Cars & Trucks

No overdrive 1997 Mitsibushi Galant, 4 Cyl Engine, Auto Trans Transmission shifts 1-3 fine. When it goes into overdrive the engine it is like being in neutral. Engine runs away and transmission stops pulling If you have the over drive turned of, it will shift 1-3 and never try to go into OD. But OD is needed. I have replaced with a used transmission. Same problem I have replaced the TCM (tans control module) - Same problem


This is a hard mechanical fault in the overdrive forward clutch, u must overhaul the trans to fix this. ... 2000 Mitsubishi Galant

Keep getting po155 code even after replacing 02 sensor several times with new one from dodge. Had transmission replaced under warranty and have been chasing 02 sensors ever since. All but 1 has been replaced at least once. dealership has replaced bank 2 sensor 1, 3 times and it seems like it keeps going bad within 1 mile of driving This is a 2004 dakota, 4.7 v8 quad with 53000 miles.


This code is for bank 2 sensor 1 only. You need to inspect the wiring harness. Chances are it was damaged when the trans was worked on. Check both sides for the same signals, Both 02 sensors before the cat. If there not the same on voltage then t ... 2004 Dodge Dakota

Car came in no start-doa. replaced distributor pick up assembly. car ran but hesitated between 50-60 mph. replaced wires plugs,cap,rotor button, air filter. car runs, after about 4-5 min. driving car shuts down no throttle. let sit a few seconds, car starts and repeats problem. before tune-up pcm threw a mis-fire cyl#1,cleared code. no mis-fire code no hesitation just shut down problem with no engine lite. datastream shows cyl#1 0 misfire,cyl#2 0, cyl#4,5 &6 show high misfire rate. not famil


Have you replaced the fuel filter? what is the fuel pressure?, this sounds like a loss of fuel pressure issue, that would account for the miss fire codes, to check fuel pressure look at the top of the engine, in the fuel supply pipe that plugs to the ... Chrysler Cirrus

1995 Dodge ram 1500 V-8 5.9 litre 4x4 short bed is feels like it is bumping when the truck shifts into cruising gear and RPMs drop truck smmoths out when you speed up bumping goes away if you shift overdrive off transmission guy says transmission si fine the truck is not firing on cylenders 1 and 3 after a full tune up and intake gasket replaced (and 1,000 dollars later) truck continues to do same thing guy who replaced intake gasket says it may be valves not properly seating and suggest install


Perform compression check between cylenders #1 and #3. These are right next to each other. \015\012You might get away with a head gasket replacement, if the compression between these cylenders is the same, indicating a blown head gasket between ... 1996 Dodge Ram 1500 Club Cab

Faulty transmission solenoid symptoms: 1. transmission delay in shifting into drive and reverse > 3 seconds 2. shift from gear 1 to 2 is delayed and hard shift when I accelerate hard 3. other gears from 2 - 3, 3 -4 down shifts are ok except 2-1 4. no burn smell in the ATF 5. CEL not on, D4 light is on, not blinking done so far: replace ATF Z1 - symptom persist. Questions: 1. CEL is not on, any other way to dignose the problem? 2. from the symptom above, i have a strong case in which soleno


If this was electronic in nature the light would be on. No you have a mechanical fault in the transmission and it sounds like you will need to overhaul it. ... Cars & Trucks

Transmission problem. I HAVE PROBLEM WITH MY HYUNDAI SONTA 1997, THE PROBLEM IS CANNOT SHIFT TO 3 RD GEAR AND STILL STAY ON 1ST GEAR.... I WENT TO FORMEN AND FORMEN DO A OBD COMPUTER TEST AND HE ASK ME TO REPLACE GEARBOX AUTO. AFTER REPLACE AND THE SAME PROBLEM IS HAPPEN. DID ANYBODY KNOWS .....PLEASE HELP!!!!!!! WHAT HAVE I DONE TO THIS SONATA IS:- 1. REPLACE INPUT AND OUTPUT SENSOR 2. AUTO TRANSMISSION GEAR BOX 2 TIMES ANYBODY PLEASE HELP!!!!!!!!!!!!!!!!!!!!!! JOEZANY


You need to buy or have your trans rebuilt this vehicle is famous for trans issues ... 1997 Hyundai Sonata
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.8898 seconds