Having problems with your 1989 Mercedes-Benz 300-Class ?

Wiring a 1989 Mercedes Ignition Harness Help -- To Universal

\015 I have a 1989 Mercedes 300E which has had about 15 owners, Over time the Ignition was replaced, I know this cause I ordered the Master Key from Mercedes... Anyway, I have started Wiring the new ignition (universal) and mounting it, the wiring goes:\015\012\015\01212V Constant - Red\015\012Starter Wire - Purple\015\01212V Iginition Wire - Pink/Red\015\012Accessory Wire - Pink/Yellow\015\0122nd Accessory Wire - Pink/Green\015\012\015\012--Heres the thing, I have 7 wires coming from the Ignition Harness...\015\012\015\0122 Red Wires\015\0121 Purple\015\0121 Pink/Red\015\0121 Pink/Yellow\015\0121 Pink/Green\015\0121 Green/White\015\012\015\012Now I know Purple goes to ST, Pink/Yellow and Pink/Green go to ACC, Pink/Red goes to IGN... but do I wire the two Reds together on Batt... and then what is Green/White for??\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Ground maybe.
Repair Help & Product Troubleshooting for 1989 Mercedes-Benz 300-Class

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Wiring a 1989 Mercedes Ignition Harness Help -- To Universal

Ground maybe. ... 1989 Mercedes-Benz 300-Class

Wiring help for a 1989 Mercedes 300E Ignition Harness?

... 1989 Mercedes-Benz 300-Class

Ignition switch i have 06 colorado with al-1830-edpb alarm system. someone tried to steal my truck and now i have no keyed ignition switch all the way to the wire harness that all was removed. now im down to nothing but wires and a universal ignition switch from autozone. the new switch has only battery, accessory, ignition, and starter. but i know i have 5 wires from original switch. what wires go where and 5th wire? Im so lost....

Why not look for a used column with all the wiring harnesses and switches? ... 2003 Hummer H2

04 Trailblazer, trying to connect a gmos-04 harness kit to an alpine aftermarket stereo, just having trouble finding AMP turn-on wire, ignition or accessory wire, illumination wire, and the dimmer wire, are they all bundled in the smaller harness (not the harness holding all the speaker wires)...any help would be appreciated ! thx !

You don't need all those wires . Just connect what you have and the gmos will simulate the rest ... 2004 Chevrolet TrailBlazer

My 2010 dodge grand caravan headlights do not work. When I turn the van on the headlights blink on and off 5 times then remain off. When I turn the ignition key without even starting the van the headlights will do the same on and off. Is it a bad ignition? Is it a bad light switch? Is it a spliced ground wire somewhere in headlight wire harness? Please help.

... Cars & Trucks

Inside wiring harness plugs need diagram for please it caught on fire at the ignition new years day got harness off a 1994 plugs dont match need to know where they go i really need help i caught my kitchen on fire 2 weeks later i have no money trying to do this myself please help me.please. Thank you so much.My is a 1993 SE v6

Okay,,,Find a Nissan dealership in your area,Go to the parts counter and explain how you need a diagram for this model and they will print you one while you are there .Also if you goto your local junk yard you could most like ly get a harness the who ... Nissan Pathfinder

Changed a ignition switch and tumbler in a 1988, 300 sel mercedes benz. the wiring harness disconnected from the wires. there are 7 wires, I need to know what slot they go into

... 1988 Mercedes-Benz 300

My 1992 mercedes 500 sel just don't idle perfect. its like a weak idle, I had my throttle body rebuilt and gave it a tune up. New spark plugs wires,distributor caps, rotors,replaced the ignition coils, and also the mass air flow sensor and put in a new wiring harness. So what is left to do?

... 1992 Mercedes-Benz Mercedes Benz S Class

C10 wiring i have a universal key ignition and want to know what color wires do i put for batt,acc,ign because the other one is all torn down and wont come out so i am going at the bottom of the steering colum help please

You did not give the year of the truck, but this might help.You may need to get an actual wiring diagram from a shop manual since that info is not usually in a DIY book. ... Chevrolet Cars & Trucks

1998 GMC Sierra. Blower motor works sometimes. No particular circumstances, just when it wants to. Checked all fuses, relays, even replaced the resistor, nothing. Followed the wire harness and found the two pigtails that others have mentioned. Took the wires off, black and purple, and turned ignition on. Getting around 11 volts on all sittings except for the highest setting, it reads 0 volts. The compressor turns on at the console, all the switches on the console work, just not the fan.

Could it be the blower motor it self? sometimes they have a "bad spot" when it is not working, can you hit it and make it run? pretty common on these trucks. the switch is also common. they often melt at the connector on the back making a bad connect ... 1998 GMC Sierra

I need a diagram showing the placement of the wire harness attached to the ignition switch for a 94 C280 Mercedes. There are 7 wires.

... 1991 Oldsmobile Cutlass Cruiser

1999 Olds Silhouette 3.6l v-6, HELP! I went to perform testing on ignition switch wiring, and my manual says to backprobe at the harness, it says if engine wont start to put key in start position,that would mean as im cranking engine correct??? it has me check other wires in the ACC position, and on position,so the start position is actually as i crank it rite??

Acc means 2 clicks forward, without starting the vehicle ... Oldsmobile Silhouette

97 gsxr750 srad. Previous owner hacked wire harness attempting to make stunt/track . I have ignition, kill switch, and start button controls. After a few days of all sparetime attempting go rewire all in but gauge cluster. Could someone PLEASE help me out. At the least i just need it to run and can wire lights etc from there. Thanks

... Cars & Trucks

2001 Town & Country. No spark. Have codes 0351, 0352, 0353, 1193. Checked coil pack wire harness. With engine ignition in the starting mode 9.85 volts. Replaced coil pack and crank sensor, still no spark. Fuel line has pressure and I can hear fuel pump when I turn on ignition. Confused and considering getting rid of van, Help!

Hello and welcome to FixYa!\015\012\015\012As a first course of action, I strongly suggest that you remove the positive battery connector and let it sit for atleast 5mins. before reconnecting. This will reset the system and may get it back to i ... 2001 Chrysler Town & Country

Converting a stock ignition switch to a universal key style switch. What is the wiring layout on stock harness for the ignition switch on a yamaha razz 1988 moped?

... Cars & Trucks

Installing keyless entry / remote start. A wiring diagram of the ignition switch harness would be helpful. Can you assist?

... 2005 Chevrolet Malibu

Ignitiion I clipped the harness wires to the stereo and the ignition dont start what do I do? please help,

Remove the stereo harness and then check your fuse's........ ... 1999 Saturn SL

Ok, I am going to put the whole story out here, hoping someone can help. I put a 1996 pontiac sunfire engine into a 1997 pontiac sunfire. I also changed the engine wire harness, the brain, and the ignition. Did the passcode reset, my theft system light comes on and stays on, and when I start the car, it starts but stalls out. What am I not doing right?

... 1997 Pontiac Sunfire

I have a 98 dodge 1500 and when the headlights are on I can turn the ignition off and the truck keeps running.My passenger blinker don't work,and my parking lights come on automatically when I start the truck(not normally)I have replaced the headlight wiring harness and it didn't help.

Id be looking at the rear of the fuse panel to see if somthing is shorting out the other circuts, the fuses for these are under the hood, there may be frozen water in there? ... 1998 Dodge Ram 1500 4WD

1989 honda accord DX My radio and heater motor both quit working at the same time, I checked the fuses and even changed the wiring harness on the ignition,and neither one work,please HELP

I am currently working on the same problem, I think you will\015\012find that with the car running, if you turn the ignition off very very slowly\015\012there is a spot about half a millimeter before the engine shuts off that the\015\012heater and ra ... 1989 Honda Accord 4 Door

Gentlemen:In the harness there is two black wires that are supposed to go to negative (ground),but when is conected to ground the pump relay is working,but the injectors dont pulse or work,and there is no spark,when is disconnected there is spark but the pump relay dont work and the injectors dont pulse or work anyway.Please Help !!...The computer has been replace and the harnes is alrady repair,the distributor module and pick up coil and ignition coil has been reolaced also. Still dont start.Th

I think you have 2 problems:\015\0121-Injector module\015\0122-Ignition module\015\012The Injectors don't pulse in both cases because the injector module has a problem. The spark is generated if the ignition module is working by creating a puls ... 1985 Lincoln Town Car

Car has big problem, DTC 1374, fault in the 3x signal. My garage has car month now and can't find the problem. I changed the ignition module, they changed almost all the sensors,computer, and checked wire harness from crank sensors, yet the problem persists. can you help?????????????

Sounds like the CPS is not getting an accurate reading. If the sensor is not getting a correct reading then you will have those faults. My buddy had the exact same problem replaced the CPS and was good for a day or two. Found out that the plate the ... Buick Century

No spark Used vehicle quit running due to no spark.  Original wiring harness was ruined, apparently by underhood fire, and home made replacement looks like it connected all components correctly.  Could find no defect in coil, signal pickup at distributor, running resistor or universal type ignition switch.  Module was working properly according to parts manager of auto store with electronic testing equipment.

Do this lift the distributor cap and crank the engine make sure that the rotor is turning. keep me posted. ... 1988 Jeep Grand Wagoneer

How much should it cost to replace the ignition wiring harness located in the stering column? Its on a 1997 Pontiac Sunfire SE. When I turn the key nothing happens but everything else in the car works. A mechanic said it was the starter and the ignition wiring harness in the stering column. I know a starter cost right around $95 dollers but what about the wiring harness?

... 1997 Pontiac Sunfire

Im working on a gmc 3500 fuel pump the wireing harness is differnt please help asap its raining and dark with lights please talk to me its a box truck colors are all differnt then then the original wire harness to power the fuel pump new harness says d3ca..Please help ASAP

The wire colors are not the issueThe wires should be exactly were they are on the old pump & the connector& you should be able to just plug it into the vehicle harness,as you unplugged the old one, or you have the wron ... Cars & Trucks
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.6226 seconds