Having problems with your 1987 Volvo 760 ?

91 740 high beam will not stay on

\015 I replace the light and the turn signal switch and the high beam still would not stay on.. I also remove and ck the relays under the ash tray \302\240and it still does not work..\015 Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Thanks to all who helped on this issue, the problem was solved after I replace the Orange roung relay. under the ush trey, it controls the light out unit.
Repair Help & Product Troubleshooting for 1987 Volvo 760

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I turn on my head lights, the high beam indicator light stays on even though the high beams are not on. The high beams will come on as your holding the lever in but as soon as you let go they go back to the low beams. The high beams will not stay on. I just bought this car this weekend and haven't tried anything yet so I thought i would see where I should start. I think that it's probably no the light bulb itself since the high beams come on when you have the lever pulled back.

Sounds like the headlight dimmer switch is defective. Remove the steering column covers and replace the switch. ... 2004 Ford Focus

Need photo/diagram of under dash fuse box for a 1994 Dodge Dakota I have no owners manual and each fuse location states to look in owners manual for that fuse. Same Vehicle. When my headlights are on high beam for approx 2 minutes, my headlights go OUT. Running lights stay lit however headlights go out, then back on, then back off. This continues as long as the high beam is on. Once I go to low beam, the headlights stay on. Any suggestions would be appreciated. I have checked ground and fuse un

... 1994 Dodge Dakota Club Cab

I have a 2005 montana i installed hid headlight kit both low beam and high beam work but when i switch from high beam to low beam the high beam stay on but when i turn the lights off they go back to low beam i have checked all the wiring and power and ground both are good any suggestions

Yours is the fifth problem with the hid headlight kit,have no idea,it may be their problem since people are having trouble. ... 2005 Pontiac Montana

High beam headlights came on by them selves and stay on untill you pull the main fuse for the high beams. Can not locate the relay that controls the power to the high beams. The low beam system works normally. Looking for a wiring diagram or help on locating the relay. I am working on a 05 Kenworth t800

It is located at the beside your steering wheel or beside the fuse box.. ... Ford F 450 Super Duty

I have a 2000 buick regal ls and the high beam switch on the steering column broke. It broke in the on position now the high beams stay on and when you shut the car off the headlights stay on all the time. How do I manually break the circuit?

There should be a "Headlight" fuse in your fuse panel. Use a NON metal object like plastic fuse pullers to remove that fuse. If you don't have plastic pullers, be extra carefull and use a pair if needle nosed pliers. You don't want to get shocked or ... 2000 Buick Regal

'86 Lincoln Town Car high-beams won't stay on perfect every time. I can get it to work fine, but not fine enough to pass inspection. How do you change the high-beams?

Or, you might consider replacing the multifunction switch ... 1986 Lincoln Town Car

DRL PROBLEM DRL dosent work, when i start my car DRL dosent work,and also when turn on the light and trying to go to high beam,only left high beam works and right high beam stay off.I checked bulbs are good. What is the problem? ASIM

Check fuses,\015\012check wiring. ... 1994 Honda Accord

1969 vw beetle when lights are switched on only have parking bulb working. Fuses all appear to be sound. On flicking high beam lever on column high beam comes on but does not stay on. Relay between switch on dash and lights replaced with no change to problem. Can hear Dimmer switch click when pull high beam lever on column.Please advise

... Volkswagen Beetle

When I pull the lever on the steering wheel to engage my high beams the blue light displays, but as soon as I let the lever go - the high beams go off. I cannot get the high beams to stay on. How do I fix this?

Sounds like the lever switch in the steering column broke, it's not staying clicked in the on position, and some of them are not easy to change. ... 2003 Buick Regal

My light problem is i have low beam on right side no low on left side i turn highs on and right side goes out and high on left turns on then when back to lows beams and i pull turn signal to flash high beam right light does not respond stays on then left light turns on when i release signal lrft light goes out .any one know whats going on

If you have separate bulbs for the low and high beams(4 light system), if you pull the turn signal and hold it, all 4 lights will stay on until you release the turn signal. You need to replace the bright bulb on the right side and the lo ... 2000 Ford Mustang

High beams work low beams do not high beam indicator light stays on

... 2008 Ford F-150

I have no high beam headlights just low beam with 12 volts and low beam with 8 volts and the high beam light stays on in the dash all the time

Check Hi beam bulbs they may both be burnt out, and check both fuse boxes. Headlights are offen on separate fuses Left/right so you don't end up with no lights at all ... 1999 Dodge Ram 2500 4WD

I have a 2001 Ford Mustang, the low beams work fine, and when I click the leaver to engage the high beams, they come on, but if I let go of the leaver, they go back to the low beams, and the high beams won't stay on?

... Ford Mustang

Saturn l200 low beams quit working at the same time an now only the high beams work an the little blue light indicating high beams stays on even when i click over to the low beams which arent lighting up

... Cars & Trucks

Only high beam works. Why don't my low beams work or my car horn. Relay, dimmer switch and new lights replaced. Still only works on one beam. High beam sensor light stays on in the dash of the car all the time except when car is not running.

Check your fuses. ... 1997 Pontiac Sunfire

Right side low beam headlight stays on when high beams are switched on; left side low beam is off. Are all four headlights supposed to be on or off when switched to high beam?

Right headlight is bad, all 4 should stay on ... 1986 Oldsmobile Ciera

High/low beam The high beams stay on and will not change back to low beam, is it the high/low beam relay and where is it. I was driving the car and went to change from high to low and it just stopped working

It very possible it could be in the switch itself but check the relay first which is usually located under the hood in the relay box ... 2001 Dodge Neon

My Beetle low beams lights work fine on the first position, on the second position nothing is on but my low beams , and when I use my third position on the spring closest to the driver the high beams both go on but will not stay on and when the arm control want's to return to the second position the high beams go off? is this the arm switch?

No. its the high beam relay. ... 2000 Volkswagen Beetle

I cant get my low beam on..my high beam stay on and when switch to low beam,it still high beam please help cause i work the graveyard shift and im sick of tire of getting pull over for something i cant fix...very grateful sokun boston

Sounds like your switch on the column is broken. It happened to me before. I didn't feel like taking the whole steering column apart so I traced the wires from the headlights and hooked up one of those old floor mount clickers. They still sell new ... 1997 Chevrolet Blazer

How to repalce a high beam switch on a Plymouth grand voyager as well as the headlight switch. My headlights do not work and the high beams only stay on if I pull back the high bem switch on the steering column

Pull dash panel and remove switch hardest part is getting the knob off. you must insert a small screw in the slot to release knobe. if its in the switch on the collum you would have to remove the sterring wheel to replace. haynes and chilton manuels ... 1985 Ford F150

One head light wont turn on,if the car has the low beams or high beams the high beam indicated stays on

Replace the headlight bulbs both should be replaced as a unit ... Hyundai Accent

2004 buick regal low beams work dimmer switch clicks to turn on high beams but high beams stay on only if you hold switch

... Cars & Trucks

Recently installed dual halo L.E.D projection headlights in my 99 dodge ram 1500 4X4 and my high beams work great but my low beams are very very dim. the high beam indicator stays on no matter what. please help. thanks

You need to check the ground circuit, it is the red/orange wire at the head light bulb, the grounds all aitches to the ground leg at the lower center of the dash. try running a jumper wire to the re ... Dodge Ram 1500

98 chevy cavalier high beam indicator light stays on as soon as i start the car, but when i turn on the low beams indicator for high beams turns off?

... 1998 Chevrolet Cavalier

I have no low beam headlights or daytime running lights only high beam lights and my high beam indicator light in the dash stays on all the time even with my lights off

I had the same problem wit a 97 Sunfire GT. It was the light control switch on the steering whell column. i went to Advanced Auto for the part. I think it was around $35. The lights have worked perfect in all modes every since. hope this helps. ... 1999 Pontiac Sunfire
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0673 seconds