Having problems with your 1987 Chrysler LeBaron ?

How to remove Key Tumbler in 1987 LeBaron

\015 I have steering wheel off, turn signal out. How do I remove the key tumbler.\015 Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 1987 Chrysler LeBaron

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to remove Key Tumbler in 1987 LeBaron


... 1987 Chrysler LeBaron

1999 Ford Taurus Se with U engine. When turning car off and removing the key, the oil and ABS light are still illuminated, also the chime to alert you that the key is in the ignition chimes. I solved the chime problem by removing the ignition key tumbler and removing the sensor that causes the chime that was loose. No idea why the oil and ABS lights stay on when the car is off anf the key is out.


Well if the ABS light is still on when you turn the car off you might want to check the brakes especially if you have drums in the back. check the oil level too. also the oil pressure guage might be bad along with the abs sensor. ... 1999 Ford Taurus

I have a 95 firebird. I had to replace the ignition tumbler because I found the vats wires to tumbler broken. Had new key and code done at dealer.problem is nothing when key turned to start position. Checked power with testlight crank fuse at fuse panel. And relay box under hood. Power good can here clicking sound in engine compartment when key turned . Removed fuse at box insert testlight turn key o.n light on turn to start click sound and testlight goes out. Also hook up remote starter switch


It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many. Gradually the car begins not cranking anymore or if it cranks it would start and die in a second. Randomly it will do this more and more oft ... 1995 Pontiac Firebird

1997 jaguar xj6 passenger side engine bay fuse box fuse # 10 IGN control (low current) 5 amp blows as soon as turn the key then the battery drains and car dies what is happening and how do i fix it. Also does this fuse have anything to do with the key tumbler because my new problem is now when i start the car i can take the key completly out and the car will still run and drive even though there is no keys i must remove the battery cable to turn the engine off. do i need a new tumbler or could i


The fuse failure is a direct result of a short to groundthe car running after removing the car is a tumbler issue or an ignition switchhowever, looking at both concerns you can speculate that the ignition switch is the source ... Jaguar XJ6

1997 jaguar xj6 passenger side engine bay fuse box fuse # 10 IGN control (low current) 5 amp blows as soon as turn the key then the battery drains and car dies what is happening and how do i fix it. Also does this fuse have anything to do with the key tumbler because my new problem is now when i start the car i can take the key completly out and the car will still run and drive even though there is no keys i must remove the battery cable to turn the engine off. do i need a new tumbler or could i


I think your thumbler is shorting and blowing the fuse..; replace the tumbler..your ignition is wired to the tumbler.. if thats shorting it will explain your issues. ... Jaguar XJ6

1997 jaguar xj6 passenger side engine bay fuse box fuse # 10 IGN control (low current) 5 amp blows as soon as turn the key then the battery drains and car dies what is happening and how do i fix it. Also does this fuse have anything to do with the key tumbler because my new problem is now when i start the car i can take the key completly out and the car will still run and drive even though there is no keys i must remove the battery cable to turn the engine off. do i need a new tumbler or could i


Chances are its a shor on the tumbler involving the ignition wires that are also connect to the tumbler..I'll suggest you replace the tumbler.. ... Jaguar XJ6

My Plymouth Voyager 98 won't start but when the key is inserted in the ignition, there are all kind of beeps, locking doors and all . Then the starter relay clicks and all goes off. When the key is removed, some noises stay and i have to disconnect the battery or push on the brake. This happened after using a duplicate key and the ignition tumbler is hard now. Could it only be the key tumbler and how can i bypass it to start the van and go to the next garage... 30 miles away?? Thanks!


Spray some wet grafite spray in the key slot,plenty of spray and work the key back and forth.Remove the battery cables and clean the battery terminals ,and the battery post real shiney,and put them back on.Make sure you have good battery voltage also ... 1998 Plymouth Voyager

Power is on all the time with or without the key in the ignition. There are no positions (ie...accessories, on, start). When the key is inserted it moves freely in all positions. I removed the steering column covers and can see that the key tumbler still pushes the rod in the start position but the starter doesn't engage. All dash warning lights and indicators are all on. I'm assuming that the ignition switch itself is broken but I don't know how to remove and replace the switch and if it's a pr


Ok some where on the tumbler there will be a very small pin hole you will have to put the key in turn it forward one click then take something that will fit in the pin hole and push in and pull out on the key this should remove the tumbler then follo ... 2001 Ford Ranger Regular Cab

1969 Bonneville key won't turn. Replacing ignition switch requires the key to be in "run" position in order for it to be removed. How do I remove the ignition switch to replace it if I can not get the key to turn into the 'run' position. Tumbler is jammed. Help?


... Pontiac Catalina

I have a 1992 Mercedes 500 sel Ignition tumbler is bad But the key I broken but is not in the ignition I do have the valet key bit it will not turn what can I do to remove the tumbler without the key being able to turn?


... Cars & Trucks

1993 DEl sol key gets stuck in the ignition when trying to remove. I already replace the tumbler and having same problem. My daughter drives the car and the car sometimes will not start in park but will start in neutral. So looks like I need to replace the park neutral switch. Could that neutral switch be the cause of not being able to remove the key from the ignition.


... Cars & Trucks

How to remove the key tumbler from a 2003 Saturn car. I need to get to the ignition switch as they seem to freeze up and get hard to engage when it is like 20C below and colder. Someone said it has to do with the lube they used. so to get into it I need to remove the tumbler to clean out the old lube and put new lube in.


... 2003 Saturn Ls 4dr Sedan

Lost key i have lost my car keys and am trying to remove tumbler but need a wiring diagram or something to show me how to remove it.


Is you fix this? ... 1992 Acura Legend

On my 1995 ford f350. I started my truck the other day and it would not shut off. the key tumbler would just turn freely between the start position and off. I replaced the key tumbler because it felt like it was sticking a bit. but when i reconnected the battery. everything was still live. the plastic push rod seems to be in one piece, but I did not go as far as to remove it. could that be the problem? or is there a different electrical problem?


Seems like the key is not activating the electric switch the best way to make sure and not spend money on some wrong item wold be to remove the switch from the steering column is under dash and you probably need to loosen the column to drop it down a ... 1994 Ford F350 Crew Cab

91 Corvette - Service Engine lights, Speedometer goes (usually) to 0, Average miles per gal goes to 5Y5, engine stops. Engine cranks but will not start. Wait a bit, remove key, insert key and it will usually start. only code is 12 which is normal. (Speedometer sometimes goes to 108 or 17 instead of 0 - while sitting and Idleing) Can sometimes get out of engine stopping by flooring it - must be driving to do this.


... 1991 Chevrolet Corvette

Key gets stuck from removal of tumbler Liquid wrench works for a while .Iv tried resetting security settings to no avail .Is this the keys or the tumblers and why? and ? is this a recall problem .is this an inherent problem and is there a recall .Thank you for your response in advance. Ak


Hi, there is no recall for the igntion switch. The best solution is to replace igntion switch. If you need more info just re post.\015\012 Thanks dodge tec ... 2005 Pontiac Grand Prix

Lost key to 1998 Chevy S10 Need to remove&replace tumbler w/o key


With the title and an insurance card your dealer can cut a new key by the VIN if you have never replaced the lock cylinder before. If not it will be remove the column covers, drill out the lock and try not to damage the lock housing. Good Luck ... 1998 Chevrolet S-10 Pickup

Ignition switch won't release key when it is put in park. But when I removed switch and key tumbler, the key tumbler/cylinder releases key. Why won't the key release when it is in park?


I figured out that if you shift into park and then with your thumb NOT pressing in the little side shifter button , pull the shifter back quickly (toward Neutral ) and back into park without depressing the button....you should hear it "click" into Pa ... 1993 Jeep Grand Cherokee

A key, without a chip, was cut to open the door of my 2002 Honda Odyssey. Unfortunately, someone tried to start the van with the same key. It is now stuck in the ignition and I can not pull it out. The ignition will not turn to 0 it will only turn to I. The van will start if the old key is held to the key in the ignition but the light for the gear shifter will not go off, the P stays lit. Do you know if the key can be removed and if so, how?


... 2002 Honda Odyssey

Removal and replacement of key tumbler 1994 Ford explorer


Look at the steering column below the ign lock and tumbler there should be a small hole turn key to on pos and push a small rod up the holethis then should release the lock and tumbler,no hole then wheel and coumn has to be stripped to get to lock r ... 1994 Ford Explorer Limited

How do you remove an ignition key cylinder from a 97 GMC sierra, the key has broken off inside the tumbler?


... GMC Sierra 1500

I have a 1995 LeBaron convertible and the trunk will not open using the key or latch release inside the car. Any ideas? It was working then just stopped. When you turn the key in the lock it turns very easilty, but when you turn key back to remove it it makes kind of a spring noise.


... 1995 Chrysler LeBaron

My 1983 El Camino's ignition, on the steering column, will turn, freely, all of the way through to the end of the path, without engaging the starter. It will still lock into 'lock position' when removing the key and will remain locked until the key is reinserted. Power still remains with the radio, lights, and horn. Is this the switch or key tumbler failure? I thank you now for your response. Randy Sawyer.


Is the key loose in the cyclinder. it is likely the switch or the switch auctuator rod.... if it is either of those two the quick way to test is to remove the switch from under the dash... if the arm that moves the switch moves freely it is likely ... 1985 Chevrolet El Camino

My 2001 mazda mpv is not releasing the key. Solenoide that allows the key to get to the release position is on all the time any ideas where the power and ground signals come from. I know the tumbler is ok. because I can remove the key if I disconnect the solenoide. Thanks.


... 2001 Mazda MPV

Tumbler problems I put my key in the ignition and it won't turn. Could it be the tumbler and how do I remove the tumbler to fix it?


Try this, put the key in and turn slowlyat the same time turn the steering wheel left to right and do this several times. this may get the tumblers to drop like they should. please rate this ... 1999 Dodge Caravan
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 1.6103 seconds