Having problems with your 1986 Toyota Pickup 4WD ?

Brake light on 1993 toyota truck will not work

Posted / edited by AnonymousUser on : 22-01-2018

Answers :

Repair Help & Product Troubleshooting for 1986 Toyota Pickup 4WD

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

1982 toyota land cruiser Tail Lights not working i have tested all mu fuses checked the wires the bulbs are good my tail lights stayed on for about 5 min after i turned off the truck then just stoped working all together i have brake lights just no tail lights and running lights any help would be great thanks


Do you have dual battery wiring??? I had the same problem with my cruiser when I first purchased it. The main battery was connected to the starter motor, headlights, indicators and a couple of other lights. Although not installed, the positi ... 1983 Toyota Land Cruiser

2003 Toyota Tundra Limited Truck. No Brake lights, but the 3rd brake light works. The 15 amp fuse by the steering column is good. Ed suggested to check the connector under the bed. Where is that located? Also if anyone else has any suggestions that would be great. Thanks.


The connector is at the back under the bunper by the frame......it should be a 3 way connector. If that's not it,check for a ground wire loose...good luck ! ... 2003 Toyota Tundra

2003 Toyota Tundra Limited Stepside truck. No brake light. But the 3rd brake light works. Already checked the 15 amp fuse by the steering column


Hello. \015\012\015\012We would suggest that you look at the wiring connector under the bed, that feeds the taillamps. \015\012\015\012You will probably find a coroded wire in the connector. If the 3rd brake lamp works, all of ... 2003 Toyota Tundra

Trailer brakes I have a 04 Chev. 2500HD my trailer brakes worked when I first towed my enclosed trailer a week ago, now they wont work. rt & left blinkers, brake lights and clearance lights all work on the trailer... it is just the power to the trailer brake... the brake unit inside the truck has power to it and seems to be working fine, wiring seems in tact and no blown fuses. When the wiring harness is attached to the truck, the trailer brake doesnt recognize that anything is attached. Any ide


Take a 12 volt test light... the kind that has a spring loaded clip to hold the probe into the wire, and insert it into the wire just before the trailer plug, vehicle side. (Blue I think) If there is a connection, the brake should see it and you shou ... 2003 Chevrolet Silverado 2500HD

1990 Chevrolet c-1500,with No brake lights lights work except the break lights ,replaced the brake light switch and Adjusted,Getting power to the switch but none to the plug at the rear . I checked it at the connector, Hazard flashers don't work either,all fuses are good . even replaced the hazard flasher and it still don't work,also checked the ground at the back of the truck . I ran a Test lead from the battery to the connector at the rear of the truck and both lights worked individual.


... 1990 Chevrolet C1500

Here's my problem...My truck has four wires for my trailer, Red-Brake, Brown- Running lights, Yellow-Left signal and Green-Right signal. My trailer also has four wires, Yellow-Left signal, Green-Right signal, Brown-Running lights and White-Ground. My Question is, how do I get my brake lights to work on the trailer when all the wires are already used up for signals and running lights. I still am left with the brake wire on my truck. Am I able to get brake lights working on my trailer too?


Also try http://www.etrailer.com/faq-wiring.aspx. They have easy to follow directions and color codes. Plus you can order anything you might need. Hope this helps. ... 1987 Toyota Pickup

I have a 2006 Chevy Silverado 1500 4wd, and both of my brake lights stopped working, but the light above the bed of the truck still works. I have checked all the fuses, changed the bulbs, and checked the brake switch, and changed that just to check. I still cant get the brake lights to work. I traced the power and it works all the way to the junction box, but not out to the brake lights. So I bought a new junction box, and I am still not getting any brake lights. Any idea's on what else it can b


Well it sounds like you have a short fro junction block to taillights , make your own wire from where you know you have power to brake lights . and that will tell you where to go. ... Chevrolet Silverado 1500

I have a 2006 Chevy Silverado 1500 4wd, and both of my brake lights stopped working, but the light above the bed of the truck still works. I have checked all the fuses, changed the bulbs, and checked the brake switch, and changed that just to check. I still cant get the brake lights to work. I traced the power and it works all the way to the junction box, but not out to the brake lights. So I bought a new junction box, and I am still not getting any brake lights. Any idea's on what else it


... 2006 Chevrolet Silverado 2500HD 2WD

My trailer brake lights on my 2001 suburban 2500 work when the truck is not running but when the truck is running they will not work. All other trailer lights work including the blinkers which is the same wire and same connection on the wiring harness. When you hit the brakes while it is running the lights go out when u let off the trailer taillights come back on. All lights work correctly on vehicle as well. The other day the abs motor would not turn off after cutting ignition off so I unplugge


... 2002 Chevrolet Suburban 2500

Tow plug We have a travel trailer that when the trailers plugged into the truck the left turn and brake light don't work. All other lights work and it comes on when head lights are on. We can't figure it out. we have gone over every part of the wiring of the tow plug. Could it be the camper plug? I don't know. We also had to install a brake controller in the truck. F-250 it has 4 colored wires and the brake controller has the same colored wired. It said to hookem up to the same and it would work


Check and clean all the ground connections.It sounds like a ground issue if they come on with the headlight switch. ... 2005 Ford F 250 Super Duty

1995 Ford F350 having issues with marker lights and left turn when hooked to tow a trailer. Everything works on the truck when NOT pluged into the trailer, but when connection is made the only lights that work are the right turn, brake and trailer brake lights. The truck has a factory tow hitch and ALL lights worked just fine 2 days ago.


Check wiring on trailer ... 1993 Ford F350

I have a 1990 Chev. Silverado truck. With the headlights off, the brake and turn signal lights work normally. When I turn the headlights on, the brake and tail lights do not work and the turn signals work but very slowly. I have replaced the tail light circuit boards, and cleaned and re-attached the ground connections to the truck frame at the battery and at the tail lights. With all lights/accessories off, when I put a volt meter between the negative post of the battery and the battery cable or


Are you a resident in the north eastern part of US?\015\012\015\012Clean the top post of the battery.\015\012Check for deform shape on the battery.\015\012A battery with incorrect acid / water mix will expand.\015\012\015\012Check the vol ... Chevrolet C1500

I have a 1992 Toyota DLX ExtraCab Pickup with a column-mounted automatic shift. The truck has sat for a couple of months without being driven. Now, when I attempt to drive it, the engine starts just fine, but I can't move the shifter out of Park. This should release when I depress the brake pedal as it has done for years. The brake lights work just fine, so the switch appears to be doing its job. All fuses check out -removed them with new ones just to be sure. Now I'm stumped. I would fi


Not super familiar with these but i believe you can turn the key to the first or second position and shift out of park ... put it in neutral and start the truck and move it. I do however know that not all of the interlock systems are electrical...on ... Toyota Pickup

My brake lights on my 2000 chevy 3500 do not work. Or more so just the 2 rear brake lights do not work. The brake light above the bed of the truck that is on the cab does work. I have checked the brake switch, the relay, and a few other items. I get no power to the 2 rear brake lights at all. Any ideas?


Turn signal switch ... 2000 Chevrolet 3500

Brake lights do not work at rear of truck ,no brake light signal in wireing harness at rear,cab brake light does work ,brake pedal switch good ,turn signal switch good,light switch good tail & turn lights work at rear & front correctly


Check the relays and connections at the tail lights and under the truck, has the truck ever been off road or in deep water? ... 2002 GMC Sierra

Brake lights work when truck is not running,when truck is started brake lights don't work . Also wippers only work when they want and no dash lights


Switch problems ... 1994 GMC Sierra

Tow plug i have no brake or blinkers when hooked up to trailer. tried diferent trailer same problem. ??????? We have a travel trailer that when the trailers plugged into the truck the left turn and brake light don't work. All other lights work and it comes on when head lights are on. We can't figure it out. we have gone over every part of the wiring of the tow plug. Could it be the camper plug? I don't know. We also had to install a brake controller in the truck. F-250 it has 4 colored wires and


You have one of two things going on first check to see if the brake light on the left side is shorted out, it will be a 1157 bulb replace it and see if it works looking good does not mean it's good if it has a single contact then it's a 1156 bulb, ch ... 1998 Ford F150 Regular Cab

I have a 93 Toyota pickup - the blinkers and reverse lights work but the brake lights don't work. I changed the bulbs and also replaced the entire light assembly. I checked the fuse and replaced it- still no brake lights. The brake running lights don't work either- any suggestions???


Check voltage to the sockets, if good check the grounds, if no voltage go to the switches and trace from there ... 1993 Toyota Pickup

The brake lights on my 1987 toyota camry don't work i have changed the fuses the bulbs and the brake light switch... and the running light reverse lights, and blinkers all work only the brake lights don't work


I have the same problem - \015\012\015\012All lights are good - Fuses Good - Brake lights don't go on \015\012\015\012Did you fix this problem ? How ? ... 1987 Toyota Camry

I have a 2008 Dodge Ram that came with the tow package. When I plug in my 7-pin trailer (with electric brakes) everything works fine until I turn on the truck lights. When I turn on the truck lights, I loose both of my turn signals and brake lights on the trailer. The running lights stay on. I unplugged the brake controller and still have the same problem. I compared my trailer plug diagram to my trucks manual and everything appears to be wired correctly.


If you have amber signal lights & red brake lights, it's 2 separate circuits. You'll need to buy a small converter that you wire into harness to correct that. Not expensive, try autoparts store or RV/trailer sales, should have them. ... 2008 Ford F-350

I have a 94 Chevy C1500 and the right side brake light and blinker are not working. The tail light and reverse light work though, and the right front blinker works but it blinks twice as fast as it should. All of the left side brake and blinkers work fine. I replaced the bulb, tail light circuit board, and tried a flasher from another Chevy truck that I know was working and still there was no change. What could it be?


It could be a bad multifunction (turn signal) switch. The way that switch works, it is possible that it can turn on the front blinker and not the rear one. It also cancels the brake circuit so the turn signal can work with the brake pe ... 1994 Chevrolet K1500

1. Truck has a clicking noise up front on passenger side. We have already changed the relay switch on the passenger side plus the 4 way flasher, but it is still clicking. It sounds like a blinker and when you put your foot on the brake it stops. 2. The drivers side back brake light does not work. all other lights and blinkers work. Tried two new bulbs and still no go. 3. Truck had a security light on plus it would not start randomly and if I waited 10 - 15 minutes it would start... and I


... 2001 GMC Jimmy

No brake lights on rear of truck. Turn signals work and brake light on top with cargo light works but not on rear of truck


You have a brake switch going bad or is already bad. i believe it to be brake switch B. this switch controls your brake lights while brake switch A controls your cargo brake light. ... 1996 Chevrolet K1500

1994 chevy silverado k1500 brake lights won't work. Turn signal and reverse lights do work. Before I found this out I was having a problem with the truck not shutting off but when I tapped the brakes it would shut off but a warning sound and dash lights would come on with no keys in the truck


... 1994 Chevrolet K1500

I have a 2007 Toyota Camry 306 thousand miles. wipers will not work cooling fans will not work heater and air conditioning fan willnot work. signal lights work sporadic. headlights taillights brake lights all work fine. car runs and drives fine speed ometer will not work and brake light on the dash stays on. also when I turn the wipers on the motors rpms increase


... 2007 Toyota Camry
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 3.4221 seconds