Having problems with your 1985 Volkswagen Quantum ?

On my 1985 VW Quantum, part of the headlight adjustment screw assembly is broken. It is the plastic piece that is at the screw head. Would a generic headlight adjustment screw work? or does it need to be this specific part?

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 1985 Volkswagen Quantum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

On my 1985 VW Quantum, part of the headlight adjustment screw assembly is broken. It is the plastic piece that is at the screw head. Would a generic headlight adjustment screw work? or does it need to be this specific part?

... 1985 Volkswagen Quantum

Drivers adjustable seat stuck full forward moter clicks when switck applied a screw shaft seems jamed but moves slightly when switch engaged . on a 2003 toyota camry this happened when slideing seat forward to get something that fell under seat out from under seat then would not return or work afterwards . could something be jambing the parts underneath some how? its very hard to drive in this condition and needs resolved quickly i consider it a safey hassard to ev

... 2003 Toyota Camry

I have a 2008 jeep commander...the blinkers,wipers both front and rear, headlight brights and running light adjustment on blinker lever stopped working at the same time. meanwhile the headlights come on automatically with ignition start up and the running lights, brake lights as well as back up lights work. I'm working to access the interior fuse panel but would not know where to start once inside since there is no (or is there) specific fuse that would affect everything i've mentioned

... 2006 Jeep Commander

I have a 1987 honda accord lxi i took it to the shop and when i got it back they told me i needed a new idle adjusting screw and that they put a temporary fix in the car now my car is sputtering and not wanting to gain speed i cannot find the part in kragen or auto zone and im at a loss of what to do do you know where i can get an idle adjusting screw from besides pick and pull and would them putting a make shift one in my car cause that type of problem?

Im sorry to say that the idle screw wont fix your problem,that just keeps the idle at the right rpms. could be bad plug wires or anything please take to a different shop. ... 1994 Honda Accord

Per diagnostic codes i have replaced CTS and MAF on 1993 Mazda 626 2.5 6cyl, now it stalls and quits at a stop, does this have to do with clearing the codes after the work is done, does the computer need more time to adjust? The car drove fine after the replacement parts, one recommendation was to drive at least 20 miles under multiple conditions, after about 25 miles i filled up the tank, and then i got about 5 miles and it stalled quit and wont start, maybe an adjustment on the throttle screw,

U followed the pin point tests for these codes you had? did you disconnect the battery after you installed new parts? sounds like u have not fixed the problem, you do have a repair manual correct? did you check the intake air hose for cracks on the b ... 1993 Mazda 626

Drivers Seat Track part need Is the seat track specific for the Mark VIII OR will another model's seat track work? (i.e. T'bird, et al) Worst case scenario...is there a manual seat model that would line up with the existing seat rails, even as a short term fix? I'm traveling mid-week next week and when the seat track stopped working a couple of days ago, it stopped the seat a little far back for my comfort/safety (and my husband is a little shorter legged than me), so I'm in a pinch for at le

The seat track in this car is specific to the model and there is no "suitable substitute" As far as repair goes they do not service any parts for this power seat track, also power seats where standard in this car and no manual seat was ever made for ... 1997 Lincoln Mark VIII

Headlights, parking lamps, and taillights dont work. (Brake lights, turn signals, emergency flashers DO work.) This car was in a hurricane fllood 5 years ago. Mechanic tells me it needs a the "lighting control module" under dash replaced. What specific part is that?

He is talking about the light switch itself. The lighting control module is just a big technical word for the light switch. ... 1995 Buick Park Avenue

I was just wanting to know what the ignition switch does and controls and how much it will cost to have it fixed? My girlfriends car needs a lot of work. The gas gauge doesn't work, the car dies in the middle of the road at times, sometimes the car has a problem starting, the tie rod is wore out, and needs a hub-assembly. Also, the motor mount needs to be replaced. I was wondering how much would all this cost and where would I get the parts and where would I need to go and have it all fixed.

These cars came with computer brains when they start going out all kinds of things start going wrong your best bet is to have it put on a diagnostic machine see where to go from there weigh the options might be cheaper to get another car ... Oldsmobile Intrigue

2009 Equinox LS - I can't drive it at night because every other opposing driver flashes his bright lights thinking mine are on High. But my work requires me to drive at night and jerks are flashing their high beams at me at the last second. I read recently where someone commented that the Equinox needed "more right side beam" which makes me wonder if adjusting the headlights would even help or if this is a design flaw on this model? My low beams "seem" to point straight ahead and left as opposed

My guess is headlite alignement, if you carry a load have them adjusted with a full load on ... 2009 Chevrolet Equinox

I'm trying to replace the passenger side front running light (part of the assembly to the left of the headlight) on a 1996 Jeep Grand Cherokee Laredo. There is a torx screw at the top, but something seems to be holding it at the bottom. How do I disassemble this to replace the bulb? The New York inspection is do and I need this stupid little light working, LOL.

I take it you mean it is to the left of the headlight as you look at it from the front correct?There may be a cover panel or some access to the bottom if you open the hood.Have you tried that?I guess you mean the yellow light that is on when the ligh ... 1996 Jeep Grand Cherokee

I have a peageut looxer 50cc moped the front headlight works sometimes and sometimes not...the bulb hasnt blown..what could be the problem and how do i fix it...and what part if any would i need to change...thankyou

... Cars & Trucks

I need to adjust the headlights on my 1996 Nissan Sentra. There are no screws around the front of the headlight to make the adjustments so there must be another way but I don't have an owners manual. I did change the bulbs but need to adjust them. Thank you for any assistance you can provide.

Look at the back of your headlight assembly. There should be two (about 2.5") rods there which can be turned with a small wrench-those are the adjusters for the headlight. ... 1996 Nissan Sentra

The keyless fob, on the end of the key had the small screw come lose & its been lost, so I need to ask where I can obtain a new screw. Also with that screw loose, or missing the black plastic button fell off & is lost. So I need to ask where I can but that part. Or where I could buy an old key so that I could take the parts off it. I don't want to try the dealer because I know they will be way too expensive. Any info would be appreciated.

... 1992 Lexus Sc 300

Need to adjust headlight on 2008 GMC Sierra 1500 . Need to raise beam up can you tell me where the adjustment screw is ? I have found the left /right adjustment screw, it is on the top. Where's the up and down?

... 2008 GMC Sierra 1500

I have a question on my 2004 Impala what would cause the low beam headlights to be out and the high beams to only work in the FTP mode, I keep the the headlights in the ALC mode all the time and only use the headlight switch when it rains, I hear the relay switching when I pull out the switch and the DRL mode is not working also,what is need to fix it? If it's is the headlight relay how do I get to it? This just started Saturday I was able to get them to work by flashing the high beams

The low beam in a headlight is not working but high beam is\015\012working. This is because the lamp bulb\015\012or halogen lamp module has reached the end of its life, not because of any\015\012wiring problems. Low beam b ... 2004 Chevrolet Impala

2007 Chevy W3500 tiltmaster, headlights- Since purchasing the truck new, I have not been able to adjust the headlights properly.  Dealer supposedly replaced the right side assembly, but the lamp still flops around in the housing.  The owners manual shows a vertical and horizontal adjustment screw, but there seems to be only a horizontal adjustment, and the problem is with the vertical.  I was wondering if there is an older or another headlight assembly that would provide the proper adjustment.

You said that you took it in to the gmc dealer Take the vehicle back and have them show you where the adjustera are in the service drive an advisor can show you how . and then if the headlight is not set in there are not push into the wholes the ret ... Chevrolet 3500

I need 1 Screw/Bolt that holds down the front driver side headlight. The headlight is loose and I need to find a replacement screw for it. Some how it got lost. How do I go about buying/ finding one? Would a place like Auto Zone have it or would I have to call a junk yard?

Most auto parts stores carry replacement parts -bolts,screws for just about every vehicle if is a hold down screw most hardware stores can match up screw or bolt ... 2002 Pontiac Grand Prix

Hiya, i have a ford fiesta 2007 with the self-levelling adjustment. A while ago the headlight were constantly going up and down adjusting themeselves and now they have just stopped working and are just at low setting. Ford dealer says one of the headlights needs replacing which contains the motor which as gone. Is this true or could it just be a relay switch?? None of the headlights will adjust, both on low setting, thanks David

... 2007 Ford Focus (3 Door) Hatchback

Headlight adjustment The whole headlight is not seated properly as well as the beams not being adjusted correctly. So, how do I take out the headlight and "re-seat". Tried the adjusting screw for the beams, but this did nothing. Any help would be appreciated. thank you.

I had this problem. The plastic grommet that the headlight fit into was cracked. I got a headlight assembly from CertiFit (cheaper than dealer.) Or try a junkyard. ... 1994 Toyota Camry

1994 Toyota Pickup 22RE engine. Before I bought the factory manual, I adjusted the idle by adjusting the throttle stop screw, then i found out that the idle is adjusted with an air bleed screw. I need to know how to get the throttle stop back to the original position. I assume that there should be a specific size gap between the throttle plate and the throttle body, but the factory manual does not provide that value. It tells how to adjust the throttle position sensor, but not the physical throt

... 1993 Toyota Pickup

96 Honda Civic. In cold weather, headlights won't come on unless high/low dimmer switch is pulled towards driver. As long as the switch is held in that position, the headlights work. After a couple of minutes, the headlights will continue to work normally, but if the switch is released too soon, the headlights go off. I was told it is the dimmer switch, but I have been told that it is part of a 'combo switch' and the whole thing needs to be replaced and I have been told that it is possible to

... 1996 Honda Civic

Adjusting HID headlights with auto level my right headlight is lower then the left.The self level works as when I turn on headlights both tilt and down. Which way do you turn white adjustment screw?

Right to raise ... 2003 Jaguar X-Type

93 lumina I would like to know how i can see a manual online i need a couple of parts but need the correct names for them. Also when you are in the car there is a squeaking noise coming from the rear end could it be a strut or shock thats bad? The parts i need are the whole arm that operates the directionals and high beam. hood latch, and my gas tank float is gone i think. it only works when the tank is over 1/2 full then it justs goes back and forth.

AutoZone has manuals available on line. Go to their site, enter the type of vehicle you're working with, and shop for the part you need. When you find the listings of parts available, scroll down and usually you will find a link to the section of the ... 1993 Chevrolet Lumina

Headlights I bought a 1993 Buick LeSabre last week. My headlights won't turn on. This morning they worked just fine. The only thing done to it today was my husband put in new fuses in the places that was missing them in hopes that my radio would work. I need to know where my fuse for the headlights is

Check under the hood of the car instead of within the chasis for the headlight fuses. ... 1993 Buick LeSabre

I need to know what a complete lower arm set up looks like on a 1990 Riviera. It's in this one guy's shop & he's saying that I need a new radius arm. But my friend who works @ a Chevrolet dealership went on the GM online parts site and no "radius" anything pops up. And a veteran GM mechanic said that it would be the "control arm." The car is undriveable because the wheel is pressed up against the wheel well or else I would take it up to the Chevrolet lot myself. Besides wanting to know what the

It is My Opinion that A BALL JOINT Broke and it MAY Require A "CONTROL ARM" To Repair it Properly, RADIUS ARM is NO Term Used in the AUTO Repair Field in my 25+ Years. Getting a Picture of it Will be Hard as Most Repair Manuals Show Partial Pics. But ... 1990 Buick Riviera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 4.2721 seconds