Having problems with your 1984 Pontiac Fiero ?
Leaking oil bad
\015 Cant find the leak. thought it was the oil filter but no. In that area though\015
If you're certain it isn't your oil filter, then it can only be three other things. The first (and easiest) thing to check is a small diamond-shaped plate on the side of the block, under the intake manifold, towards the alternator. It has a bolt and a stud in it. Verify that both of those are tight. If they are tight, check the four bolts that secure the "push rod cover" to the side of the engine. The push rod cover runs the length of the engine and is located directly under the intake manifold. This was the culprit of my oil leak, and I imagine it will be yours also. However, if you find that those bolts are tight and no oil can be found leaking from that area, check your valve cover. The Fiero valve covers were stamped from very pliable steel and it is difficult, at best, to get them to seal correctly. Problems usually occur when people torque the bolts too tight and bend the valve cover. I recommend a product called "Indianhead" gasket shellac. Remove the valve cover and ensure all gasket surfaces are clean. Ensure the valve cover's gasket mating surface is straight - straighten with a hammer and block of wood if needed. Follow the directions on the bottle to the letter, making sure to coat your valve cover gasket surface, both sides of your gasket, and the gasket surface on the head.
Repair Help & Product Troubleshooting for 1984 Pontiac Fiero
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.