Having problems with your 1984 Chevrolet K1500 ?

My new fuel pump has 6 wires and my truck only has two

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Sure they gave ritgh pump- if so look at instruction with pump maybe not use all hook-ups
Repair Help & Product Troubleshooting for 1984 Chevrolet K1500

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The truck has two connectors with a total of seven wires that plug into the factoy fuel pump.The new replacment fuel pump has one connector with four wires,two blk. one gray and one purple.Which wires connect to each other and are all the old wires supposed to be connected. Is a wire scamatic available to convert?


Wwrong fuelpump for the truck ... 2000 Chevrolet Silverado 1500

Iam having a problemw with the new fuel pump on a chevy s10, 2001, the truck was running fine and when we left the diner it did start and then when i put it into gear it died, so i had to have the truck towed home, and was told that the fuel pump was bad , no humming in the fuel tank at all, so with the new airtex fuel pump, i spliced the new wiring harness to the old wiring harness, also check the fuel relay switch in the fuse box under the hood,it does click when the key is on. also tried to s


You said the orange wire and the black wires are hot, well the black wire is the ground it shouldn't be hot. That tells me that you have lost your ground and the power is flowing thru to the black wire. look for a corroded ground either on the frame ... 1998 Chevrolet S-10 Pickup

Iam having a problemw with the new fuel pump on a chevy s10, 2001, the truck was running fine and when we left the diner it did start and then when i put it into gear it died, so i had to have the truck towed home, and was told that the fuel pump was bad , no humming in the fuel tank at all, so with the new airtex fuel pump, i spliced the new wiring harness to the old wiring harness, also check the fuel relay switch in the fuse box under the hood,it does click when the key is on. also tried to s


Hii gwpisme\015\012 As there power to the relay when you turn key on...if you do jumper the relay and see if pump comes on...if not check the plug at the pump for 12 v when you turn key on...if you have 12 v relay is ok.. ... Chevrolet S 10

Truck was running great, went to dinner and started the truck and put into gear , and truck died, so had truck jumped and the driver said no fuel, most likely bad fuel pump, so a friend and I removed the fuel tank, and dropped the tank, and removed both of the wiring harness connectors, and then replaced the fuel pump accordingly to the directions, and they gave me a new 4 wire wiring harness , with color coded wires, and used the conntectors to the wires , and then plugged the plugs into the ne


U are sure you have the repair connector hooked up correctly? is the wire to oil pressure cutoff switch hooked up? ... Chevrolet S 10

Fuel pump? I had a new fuel pump put in two yrs.ago.Yesterday,truck was running fine. I went to start it and it ran for about 5 sec. and shut down. Turned the key and would'nt start,just turned over. Had it towed and they said it was the pump, bought a new pump and they installed it. truck ran well. whent to work to day and the same thing happened ,started for about 5 sec. and quit. just kept turning over. While waiting for tow truck about 2hrs. later, I tried it & it started, when to drive it t


You need to see if your mechanic replaced the wiring pigtail to the pump. The pigtail on those have a habit of shorting out. If the pigtail is in good condition, check the ground wire. Rust likes to make the ground loose connection. ... 1998 Chevrolet K1500

Got a 1999 gmc jimmy. Wether it is cold outside or warm my truck has difficulty starting when the truck is cold. Got new plugs wires and distributor. Fuel pump is working fine. Once it is running there is no problem. I have to remove the breather and give it a sip of gas on order for it to catch and start. Once I do this two or three times it runs no problem.


Common problem with these is a fuel drainback. Use a fuel pump pressure tester, start the engine, If it's multi-port fuel injection the psi should be 50psi+. If 50psi, turn off engine and notice psi drop. If fuel pressure drops off to 10 or 5 p ... Cars & Trucks

Two times now within 15 minutes of putting my trooper in 4wd and climbing a small hill -- then taking it out of 4wd -- the fuel pump stops working. The first time I replaced the fuel pump, it just did it again with a new fuel pump in it. The pump is not get electric to it. I have to think that the 4wd does something electrical. In 2wd it rides like a dream. The Fuel Pump is wired to the alternator, does that make a difference? Was going to wire the fuel pump straight to the ignition switch? HELP


In the V6 engine the pump is switched on/off by a relay controled by the PCM - (seperate to the ECU) powertrain control module which 'sees' the 58X signal from the crank position sensor to switch on ,if the engine stops the pcm in 2 seconds switches ... 1999 Isuzu Trooper

I bought a 1997 Chevy Blazer that was not running. I put a new battery in it and checked for spark. It had spark going to the main wire on the distributor, but the fuel pump was not pumping. I sprayed starting fluid in the intake and the truck started perfectly. So, I bought a new fuel pump, cleaned out the gas tank, and replaced the old one. Now the fuel pump comes on and pumps up, but the Blazer will not start. I checked to make sure that fuel was flowing through the fuel pump and it


Seeing the engine started before with a spray and wont now I would recheck the ignition system. before checking the fuel pressure. ... 1997 Chevrolet Blazer

I need a wiring schematic for a 1999 dodge B 1500 3.9 van...Truck will start instantly run 60 seconds or so at an idle then fuel will lean out & die. Will not re start ... I have replaced the fuel pump (pressure constant 50lbs) Truck has new plugs & wires. a new IAC, Cam & Crank sensors, new dist cap & rotor, New coil and O2 Sensors... Checked all fuses, relays & voltage values to & from the sensors .... Changed ASD relay & fuses .. The ECM does not seem to re set properly .... no codes presen


Hi!!\015\012\015\012Click the following link lo get wiring diagrams of your van's electrical system.\015\012 ... 1999 Dodge Ram

I have a 1990 Chevrolet, 4X4, 1 ton, 454, 4 speed truck. It will not start with starter. Engine turns over good with starter but will not start. However, if I pull the truck and pop the clutch it will start and run great. Fuel pump is new, all new plugs, wires, cap, rotor, fuel filter, air filter. Fuel pump runs properly when switch is turned on. Getting fuel into throttle body. Have had to various mechanics.


... Chevrolet 3500

No voltage going to new fuel pump - 1999 S-10 4.3L 4WD AUTO-Truck would not start-couldn't hear the fuel pump kick on-sprayed ether in c arb started then died.Replaced fuel pump still won't kick on.Ran a hot wire to pump-it works.Replaced fuses and relay.Is there a fuel shut off switch or am I looking at a wiring problem?Maybe Oil pressure switch but I couldn'find it.HELP!!! -


The GRAY wire i believe going to the fuel pump is the hot wire it should come on for 2 seconds with just the key in the on position this is were you should check voltage for 2 seconds then it will go away until you crank the truck.Your oil sending un ... Chevrolet S 10

Truck will start when i ground the fuel pump 2 the frame of the truck 05 ford f150 i changed fuel pump so its new as soon as i take off my ground wire it quits. where is the ground wire coming from and where is it grounded 2?


Ground is controlled by your computer, check your fuel pump relay ... Ford F-150

My new fuel pump has 6 wires and my truck only has two


Sure they gave ritgh pump- if so look at instruction with pump maybe not use all hook-ups ... 1984 Chevrolet K1500

87 F150 wont start. New fuel pump, rail, injectors, cap & rotor, EEC & Fuel relays. If I pour gas in the throttle body it starts and runs great until that fuel is gone. Fuel is getting to the injectors there just not firing. Any idea what would cause this? Does anyone have a close up pic of the EEC and Fuel pump relays and wiring? They were spliced when i got the truck and wanna make sure the wires are all in the right places. 87 F150 4.9 6cyl MPI Single fuel tank


Try changing the igniton module on the distribuitor in most cases it's the problem if you dont want to buy it you can take the ignition module to a autozone and they will check it for free ... 1987 Ford F 150

Unsolved Problem! Please HELP! I have a 1996 GMC Sonoma truck. The PROBLEM is when the truck sits for a long period of time especially over night, it takes about five tries for me to START it. I have REPLACED the fuel pump, regulator and filter. New spark plugs and ignition coil. New rotor and distributive cap. Plug wires and battery are good. Used H-44 to clean the fuel line. Brand new starter. I am a woman who LOVES her truck!!! Please help! No one on my end can seem to figue this out. THANKS!


Pin hole in gas line...sucks air till gas comes back up to engine...my two lines jumped out of plastic retainer on frame...corner of gas tank wore one hole in each line... [one is a return line]... had to loosen tank straps & filler pipe...slide ... 1996 GMC Sonoma

Won't start started truck, warmed it up, turned key to off, put timing light on #1 plug wire and battery +/- ,unpluged wire to computer under glove box, started truck checked timing, timing at 10 degrees of TDC (where it should be), turned key to off, went to start truck won't start, used coffee cup and put little fuel in TBI carb fires on fuel but won't start by itself.... did i do something to the computer or fuses, pump gone, New fuel filter pluged, something happened to the injector


Start with what is missing to start the engineDo you have fuel pressure?Do you have spark? Is the valve timing ok? ... 1987 Chevrolet S-10 Pickup

I have a 1983 toyota pick up truck with the 22r engine.The problem is it runs rough when it is idling and black soot is coming from the exhaust.I have a manual choke which works fine.I have put a new pvc valve new gas filter new air filter and it did not do any good.I found two wires coming off the idle fuel solenoid that were broke so I got another fuel solenoid and install it but it did not do any good.One thing I did discover that when I disconnected the wire harness from the fuel solenoid th


Check the MAP censor. Manifold Absolute Pressure, that would cause it to run rough. Thats the only thigh i can think of. ... 1983 Toyota Pickup

1991 pontiac sunbird 3.1 starts great , runs about a minute or two , then dies , most of the sensors have been changed , no codes showing , new fuel pump new intake gasket , new wires and plugs , new


... Pontiac Sunbird

The truck was dying sometimes. We changed the fuel pump out and now the new pump will not kick on. We spliced the wires and installed the new connector just like the paperwork showed, but it will not kick on. I checked the fuel pump relay in the fuse panel under the hood. Is there a shut off somewhere else that might have tripped out while we were changing it.


I dont believe there is a fuel cutoff switch on that yr but you might want to check the pump take it out and wire it straight to the battery for a few seconds if it doesnt kick on and stay on then return the fuel pump... if it kicks on and stays on t ... 1999 GMC Sonoma

Hi I just recently found the firing order on here an was wondering if u could help me one last time I was driving my truck on day an it started to run really **** an then died I put a new fuel pump in An was able to get it home the next day went to go start it an it starts up barley with the pedal to the floor an it idles at like 500 for 10 to 15 seconds maybe an dies I've replaced fuel pump,fuel pressure regulator,spark plugs wires cap rotor an coil I put new battery in it an it did have a chec


You forgot to rate my help, on the fire order, but I can still help. ... 2002 Chevrolet S-10

Engine stalls Truck started to stall, no check engine light. We replaced the fuel pump, fuel filter is built into fuel pump, replace the fuel pump relay cleaned the throttle body, checked for leaks around intake plenum, replaced spark plugs and wires, but still does it, some times it will start and be on for a min or two then stalls and other times wont even turn on...we also checked with a Genesis scan tool all sensor seem to be working as they should...any help will be appreciated


Throttle position sensor posibly? ... 2005 GMC Yukon XL

1998 3.0 Taurus dies at any speed, after restart runs fine till next incident. Possibly related to fuel pump and or battery dying after sitting appx. 3 days?. Put on computer at Auto Zone, Tech then said L2 L3,he then said it was running too lean used injector cleaner and octane booster. Added premium fuel Released and then reset tank pressure. Have a new fuel pump ready to go in, but two computer tests all agreed it was not the fuel pump. Checked all ground wires Still no help, check engine


Your Oxygen sensor are going bad your going to have to change them . ... 1998 Ford Taurus

2003 dodge grand caravan 3.3L we put new fuel pump new coil new plugs it crancks but no start orignaly came on the two truck some times it is like want to start and die what do you thing it may be ?


... Dodge Caravan

2003 dodge grand caravan 3.3L we put new fuel pump new coil new plugs it crancks but no start orignaly came on the two truck some times it is like want to start and die what do you thing it may be ?


... Cars & Trucks

Ok, here you go,a 1988 F150 that i bought this summer ran great all summer and fall but when cold weather hit(35 or colder) the truck just turns over but won't start.When the weather warmes up it'll start easy.We changed both temp. sensors and the sensor in the intake,new ingnition,coil and wires,intank fuel pump and on the fram fuel pump oh yea their is this thing on top of the motor that a wire plugs into we chanded that too,still won't start in the cold!!! I tried to start it this morning it


Have you scanned the computer for any codes? Even though it may not have a check engine light, it still may have codes that might put you on the right course. Fords of that era have issues with ignition modules (by the distributor). It is OBD1, so ... 2005 Ford F-150
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 2.8844 seconds