Having problems with your 1983 Jaguar XJ ?

I need to replace the seat support web on my car. I believe the seats are from a daimler sovereign series 2. It is made by Pirelli and is a sheet of rubber about a foot square with 7 hooks attached

Posted / edited by AnonymousUser on : 15-01-2018

Answers :

Repair Help & Product Troubleshooting for 1983 Jaguar XJ

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to replace the seat support web on my car. I believe the seats are from a daimler sovereign series 2. It is made by Pirelli and is a sheet of rubber about a foot square with 7 hooks attached


... 1983 Jaguar XJ

1995 gmc suburban leaking power steering fluid at end of I think is steering column that hooks to something else but there is rubber seal like that is breaking apart that connects the 2 parts together? I don't know what that seal is called but it needs to be fixed because it made the power steering shaft and pully to stick together and break. I got that part but saw where the leak is coming from that rubber seal. Any ideas?


... 1995 GMC Suburban

Have 1997 80 series cruiser,leaking oil between gear box and transfer box at the joint that aligns with the gear box rubber mounts,box has we assume been removed before as different sealant has been used as to the type toyota uses,this sealant has let go and this is the problem.have made several enquiries to toyota workshops for prices etc all say that complete removal is necisary to seperate boxes to allow new sealant to be applied,which may take from 8-12hrs a reasonable expense for a little s


Yes, they would be correct that the whole thing would need to be removed. That is the way these things are. In order for it to be done right, they will have to clean off the old stuff and put on the new seal which requires complete separation of the ... Toyota Land Cruiser

I hit under my car in the front going into a driveway...it made a huge pressure release hiss... I looked under the car and one of two aluminum angled pipes has a hole. they go into two long rubber hoses into the front. they are hooked to something that runs by a belt at the bottom of the engine... what are those pipes coming out of? Is it air conditioning? It still runs and there is light oil that dripped out. Help Please.


Yep its the a.c. you need to replace the lines or not run the a.c. it will ruin your compressor ... 1998 Volkswagen Passat

Just replaced timing belt on my 2003 eclipse spyder gs, as well as spark plugs, a couple of fuses, etc. It was running fine, then went into a store, & when came out, it wouldn't start. Runs fine while hooked to jumper cables, & after leaving on boost for a while. However, it will not start back once i turn it off, just clicks. Had the battery & alternator checked at a parts store, & they're good. There was a small square piece attached to my positive post, which is broken & I removed, but no one


Your problem is related to a bad connection at the battery. By pass the terminal block in question and check the starting condition. ... 2003 Mitsubishi Eclipse Spyder

The tool that tightens the spring down for installation has left me about three inches shy of the point of attachment. What do I need to do? The compression tool I have available are single hook attachment on either end opposed to the one I've used had two hook attachments on top and a single attachment on the bottom side. Does the difference in tools make me unable to complete the task at hand?


Yes, you need to locate the right tool. AND BE CAREFUL WITH THAT SPRING !! ... Ford Taurus

2004 trailblazer transmission overheated and spewed fluid from rubber lines over the transfer case. looked where fluid came from and found 2 rubber lines one was longer and hooked to transfer case the other was shorter and seemed to be where the fluid blew out of was not hooked to anything. I could not find anything it could be hooked to on top of ******. Could it be a overflow or what could it be?


... 2004 Chevrolet TrailBlazer

The rear window has two wires that are attached to glass, with a metal square in a copper colored square on glass . one of them is off. how can I re-attach it?


You can repair it with a "Rear Window Defroster Repair Kit" that you can get from just about any auto parts store. ... 2004 GMC Envoy

I have a 99 ford windstar and the side back window on the drivers side is a pop out kind of window and where the arm attaches to the window it came loose. I know that it attaches with a screw on the arm and a rubber piece on the outside of the window. I lost the rubber piece. Could someone tell me the name of the piece that I am looking for so that I can order one. Thanks


... 1999 Ford Windstar

After having the fuel filter changed, the service engine soon light came one. P0171 is the code. Any ideas? I found one vacuum leak, the rubber boot that goes attaches to the same point where the power brake booster vacuum line is (that's been fixed). That line runs along the firewall and down near the battery. After that I can no longer see where it goes. Does anyone know where and to what that line attaches to? It seems the rubber boots are problematic on these plastic lines fail. I


Try cleaning the MAF sensor the cleaner can be purchased at autozone or another store like it on about eight dollars and take just a few minutes hope this helps ... 1999 Pontiac Grand Prix

2nd row removable seat is stuck with only the rear latches attached. The front is not attached and now cannot release the rear latches, or get the front attached. Normally the front gets attached first, but I hooked the rear 1st by mistake


1 latch on the removable seat was engaged and in locked position. The front latches were not engaged. A neighbor who is a Master Mechanic released the wire that looks like a bike brake. Then he pulled the wire and that unlocked the latch. Then he ... 2006 Kia Sedona

Large power steering leak in the line on drivers side The hose has metal on both ends and rubber in the middle i do not know what this hose is call. Leaking from the bottom part where it attaches to the metal part oh yea it has a rubber sleeve that moves over the harder rubber hose. Can anyone help with the name of this hose?


You go to a dealers parts dept & point to the hoseyou need on the computer screen ... Cars & Trucks

1997 Dodge Caravan: Took it into the mechanic because it made a squealing noise. They changed 3 belts and did an oil change. I stopped completely when I was almost home. Put foot on gas and nothing. I turned it off for a few minutes and coasted home. Then found a transmission fluid leak coming from by drivers side wheel. Mechanic now says I need a new transmission? Could they have overfilled the oil and the pressure made the seals break or are they trying to rip me off?


I've had 2 tyranny do that the gears inside the little pan work loose and it wears a hole through the tranny its like a looker dowel pin ... 1997 Dodge Caravan

Hooked up timing light to number 1 plug light will not work attached to the spark plug and wire..but it will flash when i hook it up to just the wire


Of coarse. It is an inductive clamp, you put on the wire. Got to zero out light ,if you got that feature. Unless you dial in advance,and use that feature. ... 1987 Dodge Ram 50

I dont have an keyless entry remote, and my auto theft went off today and made the alarm go off. I had to unhook the battery but then it wouldnt start. I had to lock the doors, and then unlock it from the passenger side. That made it start. Now the brake lights wont go off, so I unplugged the battery. when I hooked the ternimals back up, It wont stay running. What can I do to fix the problem??


Try with this PROCEDURE.Hope helped. ... 1995 Jeep Grand Cherokee

I have two 15" speakers and amp hooked up and all of a sudden it cut off today and nothing in unplugged, as i can hook my systems up myself. So i looked in the trunk and everything is still attached but showing no power is coming through. I'm assuming a fuse is blown.. But, I have no idea which fuse it is; either it's the one under the hood or the the fuse relay box under the back seat, next to the battery. That's my guess.. Any suggestions? I'm going crazy!!


Do you own a test light? ... 2001 Cadillac DeVille

My 2000 Land Rover Discovery II doesn't start unless I manually give it gas from the foot pedal. It seems that once the truck runs, it doesn't idle and stalls when I release the foot pedal. There are 2 cables attached on the engine, 1 for throttle and I'm guessing the other is the idle cable, What would cause the idle cable to stop working?


The second cable should be for cruise control. Your problem sounds like either a vacuum leak (air entering the engine unmeasured by the air sensor), or fuel vapor in the fuel rail. A vacuum leak can be determined by spraying starting fluid at the a ... 2000 Land Rover Discovery

What is the part called that is attached to the side of the trans and faces toward the radiator? It has a metal vacuum line feeding it and a rubber hose connecting them both. It looks alot like an EGR valve and it is located a little lower and to the side of the exhaust near the EGR, it has one nut holding it and goes to the tranny. The rubber hose connecting it to the vac line is cracked and dry rotted and this part looks original. It is moving around while I am trying to find a vac leak. I kn


THAT A TRANSMISSION MODULATOR VALVE.CHECK IT WITH A HAND HELD VACUUM PUMP.PUMP IT UP TO 10HGS TO 18 HGS.IF MODULATOR HOLDS VACUUM ITS GOOD.IF IT DONT HOLD VACUUM.AND IT LOOKS LIKE TRANSMISSION FLUID COMING OUT OF IT.REPLACE IT.MAKE SURE ITS GETTING ... 1994 Pontiac Bonneville

Take off lock ring on yukon 2000 5.3 fuel pump do you tutn the top off it thing one that has hooks or the bottom piece that is flat on the tank if so can u wrench it off or hammer and shizz it off . so what piece comes off the hook piece or bottom peice that is flat to tank and how you disconnect the fuel line with the rubber clips do u need a tool for that to


The lock ring will twist off the hooks and yes you need fuelline disconet tool sell them at auto zone pretty cheap ... 2000 GMC Yukon

I have 2003 Ford Focus wagon ztw--there is plastic tube attached to front part of car engine wall that rubber hoses are attached to--it is cracked--what do you call this? You can't just take it out easily like a hose


This is a vacume source ,from the engine ,and should be repaired ... 2003 Ford Focus

The rubber mold that fits between the windshield and the right exterior body (that runs from the top of the van to the bottom of the windshield)is loose. It is attached at the top and the bottom but wants to float out in the middle. It looks like it has small holes in the rubber mold which fit into a pocket. How can I get it to stay in place?


... 2000 Toyota Sienna

RADIO HARNESS WAS CUT TO INSTALL CD PLAYER BUT IGNITION/STARTER FUSE KEEPS BLOWING.SO CD PLAYER WAS TAKEN OUT AND CONNECTOR WAS RE-ATTACHED TO WIRES. DASH LIGHTS WORKS ,HEAD LIGHTS WORKS,ETC., BUT WHEN YOU TURN THE KEY TO START ENGINE , THE IGNITION/STARTER FUSE BLOWS AGAIN. NO CLICK ON STARTER NOR DO STARTER TURN OVER. COULD THE STARTER SOLENOID BE BAD OR THE RE-ATTACHMENT OF WIRING TO RADIO HARNESS IS BAD. WIRES ARE COLOUR CODED AND ORIGINAL RADIO IS NOT HOOKED UP. ANY IDEAS THANKS HARRY


It might have just been a coincidence, but it sounds like it might be your starter as you have guessed. ... 1999 Chrysler Cirrus

I have a 1990 Corvette with a ground wire attached to the rear frame behind the drivers rear wheel that is not attached to anything. My side lights, back up lights, and gas gage does not work. What is this supposed to be hooked to? Will this fix all or some of my problems?


The wire probably goes to a common ground point nearby on the body. Does the loose end of the wire have a clip on it? If so, it may connect to the seam of the fuel tank (if it is metal). Does the wire look like original equipment--it might be someone ... 1990 Chevrolet Corvette

I have a 2001 cavalier. When I researched the Haynes guide it seemed like an easy fix; unplug the battery and the fan, gently lift the fan assembly to release it from the fasteners on the side and the plastic hook on the top of the assembly from the piece of sheet metal at the top of the radiator, and then gently slip the assembly out of the car and replace it with a new assembly. Well thats the theory, but in reality the plastic hook on the top get caught on a piece of the frame that runs


TRY REMOVING HOOD SUPPORT BRACKET THAT OVER TOP RADIATOR.ALSO CONDENSOR BRACKET THAT WILL ALLOW YOU ROOM YOU DONT HAVE TO REMOVE RADIATOR OR CONDENSOR ... Chevrolet Cavalier

My 2004 PT cruiser is on its second serpentine belt tensioner pulley. The dealer and parts houses only sell the "tensioner/pulley as an assembly. I only need the pulley. Do you know where I can buy just the pulley? Also, while replacing the last pulley I noticed what appears to be a broken engine mount. It is about 1 1/2 feet long, sits below the accessory pulleys and is made out of aluminum with a rubber insert in the foward end (the rubber insert is broken) Is this common? Thank you for time.


I'm wondering why your going through tensioner pulleys so fast. Sounds like you may have the belts too tight. Unfortuantely I believe that pulley is actually pressed on and will break if you try to remove it but you might be able to find one at a j ... 2004 Chrysler PT Cruiser
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.carrestorationshop.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6701 seconds